Only show results in Massachusetts? Ok

Screw Turbines equipment for Hydro Energy

  • Premium

    Landustrie Landy - Hydropower Screw Turbines

    The new range of the Landustrie screw pump covers the hydropower screw turbines. An efficient use of water power is already achieved at a level difference of 1 meter and a capacity of 500 l/sec. The largest capacity and level difference for hydropower screws is as much as 15000 l/sec. at 10 meter.

    By Landustrie Sneek BV based in Sneek, NETHERLANDS. from Hydropower Product line

  • HPP - Hydrodynamic Screw River Turbine

    Designed for net heads up to 10 m, elléo hydro screws are fish-friendly and manufactured in France.

    By Hydro Power Plant SAS (HPP) based in VANDOEUVRE LES NANCY, FRANCE.

  • Hydropower Plants

    A sole interlocutor for designing and installing of hydropower plants. EPF Energy is an EPC Contractor specialized in the designing and manufacturing of hydroelectric power stations in Italy and abroad. With internal skills that range from feasibility studies to project financing, from design to installation and commissioning, EPF Energy can ...

    By EPF Elettrotecnica S.r.l. based in Carrù (Cn), ITALY. from Renewable Energy Product line

  • Hydromew - Archimedean Screw Turbines

    Worm water turbines also known as Archimedes turbines. Rotors sized 700mm – 4000mm. The flow of 0,5m3/s to 12m3/s. Optional 4 (rather than the usual 3) bladed turbine to reduce diameter and allow for quiter more efficient operation. Flow of water controlled through mechanical adjustment. Possible delivery of structures mounted on the weir, ...

    By Hydromew Sp. z o.o. based in Elblag, POLAND.

  • FishFlow - Fish-friendly Screw Hydro Turbine

    The FishFlow screw pump annex hydroturbine is a special version of the fishfriendly screw pump that can not only be used to pump water, but that can also function as a fishfriendly turbine to generate electricity. To function as a turbine the Archimedean screw is lowered until the waterlevel upstream of the screw is higher than the upper end of ...

    By FishFlow Innovations based in Medemblik, NETHERLANDS.

  • Hydroalp - Hydrodynamic Screw Turbines

    Hydroalp provides hydrodynamic screws for low head plants from a few meters to tens of meters and with flow rates from a few cubic meters up to a few tens of cubic meters per second. Screws (or Archimedean screws) are the ideal solution for all those power plants, where the use of Kaplan models would be uneconomic due to the combination of low ...

    By Hydroalp S.r.l. based in Cimego, ITALY. from Turbines Product line

  • Hidroturbin - Model Arvida™ - Hydropower Plants (HEPP)

    Hydroelectric power plants (HEPP) aim to generate electrical energy using the potential energy of the water. In order to generate energy, run-of-river plants separate river from its course and convey it by transfer structures in order to acquire desirable head then dispatch the water through pressured pipes (penstocks) to the turbines. This ...

    By Hidroturbin based in Çankaya/ANKARA, TURKEY. from Archimedean Screw Turbine Hydropower Plants Product line

  • Archimedean Screw Hydro Turbines

    The system is based on the Archimedian screw principle and is used as a water engine for small water power plants working with asynchronic generator ditrectly into a network. It is used for small water heads and inconstant water flow. Hydrodynamic screw can be used as an additional motor to existing turbines (Banki, Kaplan) using the energy of ...

    By GESS-CZ, s.r.o. based in Hranice, CZECH REPUBLIC.

  • Archimedean Screw Generators

    They move slowly. It isn’t about speed, but mass and balance. The balance is between efficiency, fish and environmental protection. Screw generators extract the potential energy from large blocks of slowly downward moving water. The mass of the water turns the tilted screw. The flow of that mass is controlled by hydraulically driven sluice ...

    By New England Hydropower Company, Inc. based in Beverly Farms, MASSACHUSETTS (USA).

  • BIOCOM - Model 100 - 400 kW - Pellet Boilers

    With the GUNTAMATIC cascade you will benefit from the highest reliability and economy. The proven step grate technology employed by the Biocom matches the boiler output to the current heat demand. This series satisfies even the highest output and quality requirements.

    By Guntamatic Heiztechnik GmbH based in Peuerbach, AUSTRIA. from Pellet Boilers Product line

  • Hydropower Screw Turbine

    Since ancient times, the hydropower screw has been known as an 'Archimedean screw'. The key factor with it, is that the reversal of its function provides an efficient means of saving energy. With collaboration with REHAR GMBH and Jash India, Electhrone Technology is proud to bring this product into Malaysia.REHART hydropower plants are ...

    By Electhrone Technology Sdn Bhd based in Kuala Lumpur, MALAYSIA.

  • Ham-Baker - Archimedes Screw Generator

    All the benefits of existing Archimedes Screw technologies. Suited to heads of 1-4m with fl ows of 300-900l/s (greater in parallel operation. Durable toughened plastic Triple Helix: lightweight, non-corroding, economical.

    By Ham Baker Group based in Stoke-on-Trent, UNITED KINGDOM. from Renewables Product line

  • Greenbug - Archimedean Screw Generator

    At least 400 Archimedes screw generators (ASGs) have already been installed in Europe since 1993 (Lashofer et al., 2012) and more are under construction, however there are currently few installations outside Europe. GreenBug connected the first ASG to the North American power grid in September, 2013, near Waterford, Ontario.

    By Greenbug Energy Inc. based in Delhi, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you