Only show results in Virginia? Ok

Hydro Energy Services

  • Premium

    Renewable Energy Testing Services

    Ocean Wave & Marine Current Energy Testing Capabilities. The Bureau of Safety and Environmental Enforcement (BSEE) collaborates with research institutions and industry on testing wave and current energy systems at Ohmsett. Our wave and towing test tank is available for R&D and testing of large to full-scale equipment processes for ocean ...

    By OHMSETT based in Leonardo, NEW JERSEY (USA).

  • Capstone Factory Protection Plan

    A Factory Protection Plan from Capstone Turbine Corporation minimizes downtime and fixes maintenance costs, ensuring your system will operate when needed and perform as intended at the lowest total cost of ownership.

    By Capstone Turbine Corporation. based in Chatsworth, CALIFORNIA (USA).

  • Security and Transport

    System Resilience: Renewable energy systems are particularily suited for resilience improvement works where they can be integrated into essential distribution systems as the alternate input. They can maintain the batteries of UPS backed systems at the same time as generating ROCs giving year on year savings in both energy and trading products. By ...

    By Thames Renewables based in Hampton, UNITED KINGDOM.

  • Turbine Inspection Services

    Even the best turbine systems experience performance degradation over time. Efficiency drops as waterborne silt wears away runner and nozzle surfaces, as bearings and seals age, and when changes are made to the penstock or other components.

    By Canyon Hydro based in Deming, WASHINGTON (USA).

  • On-site Electric Motor and Generator Rewinds

    IPS offers IntegraSeal B-stage hard coils for on-site rewinds of medium and high-voltage AC motors and generators, including steam turbine generators and hydroelectric generators. IntegraSeal represents the state of the art for high-voltage coils, combining industry-leading magnet wire and insulating materials with advanced technologies - ...

    By Integrated Power Services, LLC (IPS) based in Greenville, SOUTH CAROLINA (USA).

  • Refurbishments Services

    Today the high cost of energy makes the rehabilitation of existing hydro energy installations feasible and attractive monetarily. Particularly of the larger turbines, the major components can most likely be repaired and reused. The Leffel turbine is designed with durability in   mind, which has its rewards for the owner throughout the life of ...

    By The James Leffel & Company based in Springfield, OHIO (USA).

  • Hydro Engineering Services

    Lehoczky Engineering & Consulting, Inc. operates based on 50 years of hydro engineering experience. The experience is international and relates to machines supplied by many different OEMs (Original Equipment Manufacturer) and installed worldwide. All components along the energy flow, also called “Power Train” starting at the water ...

    By Lehoczky Engineering & Consulting, Inc. based in Palmetto, FLORIDA (USA).

  • Hydropower Construction Services

    GRACON is a premier contractor capable of installation, field maintenance and overhauling of: Turbines, generators, valves, governor systems, compressors, pumps, heavy mechanical equipment of any size and shape.

    By Gracon Corporation based in Loveland, COLORADO (USA).

  • Hydropower Services

    Hydro Power Services offers turn key solutions for on-site field machining and welding within the hydro industry. We provide technical consultation including site evaluation, technical direction, project management, specification preparation, contract inspection services, NDE inspection, field labor and training. Our specialties are listed below.

    By Hydro Power Services, LLC based in Chattanooga, TENNESSEE (USA).

  • Hydropower Services

    Gerace construction has decades of experience with dams and hydro electric plants all over the country. Our extensive experience has given us the reputation as a leader in the industry. We have an experienced staff that is fully engaged and prides its reputation on successful projects.

    By Gerace Construction Company based in Midland, MICHIGAN (USA).

  • Hydropower Licensing Services

    Gomez and Sullivan staff have been involved with the Federal Energy Regulatory Commission’s (FERC) hydropower licensing and compliance program for the past 30 years. We have participated in hydropower licensing processes on more than 60 projects ranging in size from less than one MW to the New York Power Authority’s 2,700 MW Niagara ...

    By Gomez and Sullivan Engineers, P.C. based in Henniker, NEW HAMPSHIRE (USA).

  • Hydropowers / Dams Services

    Project Identification - HISINC, L.L.C. will meet with you and evaluate the initial project opportunity, to determine the best manner in which to further evaluate a project site. Detailed Feasibility Studies - HISINC, L.L.C. will perform a preliminary or detailed feasibility study, including hydrologic and hydraulic evaluations, estimates of ...

    By Hydropower International Services, LLC based in Mannford, OKLAHOMA (USA).

  • Hydropower

    Need for clean energy is increasing; producing the clean energy through the greater use of hydro power is today a socio-political necessity and task. Within the field of Hydropower we provide: planning, design and construction management of hydro-electric power and multi-purpose projects, including studies to enhance optimum compatibility with the ...

    By ILLYRIAN CONSULTING ENGINEERS based in Tirana, ALBANIA.

  • LANDUSTRIE Archimedean Screw Turbines Services

    Our unrivalled experience with Archimedean Screw turbines from different suppliers has led us to supply LANDUSTRIE Archimedean Screw turbines. LANDUSTRIE has 100 years of engineering experience, offers the most reliable bearings, including flood-proof options, guarantees high efficiencies, and gives great aftercare. We source other mechanical and ...

    By MannPower Consulting Ltd based in North Yorkshire, UNITED KINGDOM.

  • Resource Assessment Services

    At Aquamarine Power, we have developed unparalleled wave resource assessment capabilities.  This allows us to model global wave resource with a high degree of accuracy. Our wave resource assessment team comprises some of the leading experts in their field.  They have a vast knowledge of the marine energy resource and an array of highly ...

    By Aquamarine Power (AMP) based in Edinburgh, UNITED KINGDOM.

  • Operation and Maintenance Services

    As tidal arrays are developed, accessing the turbines to carry out maintenance requires new logistical solutions. OpenHydro is developing a full operational and maintenance (O&M) service package, which includes standardised technical and commercial practices. The development of these services is informed by OpenHydro’s decade long ...

    By OpenHydro based in IFSC Dublin, IRELAND.

  • Services

    We at RTI Service will be offering great deals on upgrades on ALL Piranhas out there in the market! Take the chance and upgrade your existing Red Piranha Main Unit to a Black Piranha with all new beam qualities and modalities.

    By RTI Electronics AB based in Mölndal, SWEDEN.

  • Mooring Analysis Service

    Through a number of recent projects, and in line with a growing need to understand the loading effects of moored marine renewable energy converters, Mojo Maritime have successfully developed a strong mooring design and analysis capability.

    By Mojo Maritime Ltd based in Cornwall, UNITED KINGDOM.

  • Greenbug - Site Maintenance & Monitoring Service

    GreenBug Energy makes design and manufacturing decisions that maximize IRR over the life of the project and that includes decisions that affect long term maintenance costs such as the selection of quality and durable components and materials. We then set planned maintenance schedules based on these decisions. We do the same thing whether it is our ...

    By Greenbug Energy Inc. based in Delhi, ONTARIO (CANADA).

  • On-Site Line Boring Services

    Line Boring Machining Services On-Site by In-Place Machining Company; Line Boring is arguably one of the most common field machining operations performed by In-Place Machining Company. Very simply, line boring is a field machining operation used to make the centerlines of two or more bores collinear. IPM has performed line boring projects as ...

    By In-Place Machining Company based in Milwaukee, WISCONSIN (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you