Small Hydropower Equipment For Hydro Energy In Europe
-
Manufactured by Hydro Energy Michal Twardziszewskibased in POLAND
Propeller turbines – from 10 kW to 500 kW. We produce propeller turbines with a rotor diameter – from fi 300 mm to 1100 ...
-
Manufactured by Heidemann Wasserkraftanlagenbased in GERMANY
Building a hydropower plant, even small hydro plants, in almost all cases is a project which requires a larger investment. Again the omnipresent question of feasibility often rules out minor projects even if the realization would be a success for the area. Not the production of electricity only but as well operating pumping stations and water treatment plants is a major purpose for ...
-
Manufactured by Kuhn Technische Anlagen GmbHbased in GERMANY
A millennia-old method of pumping river water or sewage has conquered the world of hydro power generation. The "Archimedean screw" - also known as the "water screw" - is thousands of years old. It is used to pump large volumes of water at relatively low heads and is extremely reliable and durable so application operators are fully satisfied. Systematic consideration of how to utilize all the ...
-
Manufactured by repros GmbHbased in GERMANY
Design and manufacturing of all type of Hydro Turbines. Design, manufacturing and software development of power plant control system and switchgears. Capable for fully automated plant operation including remote control of unmanned stations. Supply and commissioning of “Water-to-Wire” equipment packages for small and medium hydro power plants. Rehabilitation and retrofitting of hydro ...
-
Manufactured by VAPTECH Ltdbased in BULGARIA
Either standardized units for small hydro or tailor-made solutions, VAPTECH is delivering high-quality Francis turbines. VAPTECH’s care for maximum efficiency and resistance to cavitation is guaranteed by flow dynamic analyses and tests from leading European research ...
-
Manufactured by KONCAR - Electronics and Informatics Inc.based in CROATIA
KONvert static frequency converter is a device developed for the direct transfer of energy produced by wind turbine using hardware power electronics. Universal, robust design and reliable operation, are the features of this modern products that can be applied in addition to a frequency converter for the wind turbine, to transfer energy on small hydro power plants, reversible (storage) hydropower ...
-
Manufactured by Hydrohrom, s.r.o.based in CZECH REPUBLIC
Regulation of the runner with runner blades fixed. Is the most frequently used machine for newly constructed small head hydropower plants. It is also used in the renovation of older plants originally equipped with vertical Francis turbines, which often achieves a better flow usage. The advantage is the low cost of the equipment. Installation is ether with a drive belt or directly connected to the ...
-
Manufactured by Volter Oybased in FINLAND
A microgrid is a local network of electricity sources and loads. Microgrids usually operate as part of the traditional wide area grid in normal conditions but can be disconnected to work in “island mode” to function autonomously or in off-grid ...
-
Manufactured by TES VSETIN s.r.o.based in CZECH REPUBLIC
Synchronous generators are among the TEM division’s products in highest demand. They are suitable for all types of hydro turbines with outputs up to 30,000 kVA. In spite of the product’s common characteristics,it is a customized product manufactured according to requested parameters for each specific application. The machine design is worked out by a team of experienced designers. A ...
-
based in SPAIN
Hydroelectric power has been one of ACCIONA Energy’s activities since the company’s early days. It was initially part of a process of modernization and valorization of small hydro plants, and later developed into the construction of new plants. We therefore have considerable experience in this technology, both in terms of evaluating the water resource and in the design, construction, ...
-
Manufactured by Sea-Lix ASbased in NORWAY
Small hydro has historically derived from scaling down conventional large and well established hydro power solutions. This has led to disproportionally high construction costs, in particular with regards to civil works and other necessary infrastructure. Sea-lix has approached the challenge from the core – designing a solution purposely for smaller hydro-schemes. Our G-LIX powerhouse ...
-
Manufactured by REHART Groupbased in GERMANY
Hydropower systems with a screw belong to small-scale hydropower plants. Don’t be deceived by the term “small”. This technology provides power to 13 million European households. This saves the environment 29 million tons of ...
-
Manufactured by S.W.H. GROUP SEbased in CZECH REPUBLIC
Small hydro power plant is technically exploitable potential, kinetic or thermal energy of all waters on earth. This is immediately after the second most used biomass renewable energy source. Most are nowadays used in hydraulic power conversion to electricity. Small hydro power is the designation for hydroelectric power plants with installed capacity up to 10 MW, including (NB. The European ...
-
Manufactured by Waterpumps WP Oybased in FINLAND
Waterpumps WP Oy’s hydro turbines are designed for small hydro on low head sites. There are two main designs of turbines, tube and compact type. The designed head may vary from 1 to 30 meters and the flow of the unit can be fixed or regulated. Many of the plants designed for WP Oy’s products are equipped with several turbine generators to meet the cost effective civil works and high ...
-
Manufactured by KONCAR - Electronics and Informatics Inc.based in CROATIA
Equipment and solutions we offer are custom design and installation of equipment according to the individual customer’s needs, with the highest degree of operational safety and efficiency, environmentally friendly, high-performance, reliability and quality, long life and flexibility. We offer, in the early stages of the project, feasibility studies, the initial calculation of hydrology and ...
-
Manufactured by BRAUN Windturbinen GmbHbased in GERMANY
The feed-in converter smart!wind was designed by SPE especially for small wind turbines (SWT) with a power range from 5.5 to 20 kW. Besides the control functions for a SWT the smart!wind provides several protective functions supporting a safe operation of your SWT. Small hydro plants as well as CHP’s offer additional possible applications. Our feed-in converter is available in the following ...
-
Manufactured by Litostroj Powerbased in SLOVENIA
Design principle and range of use: Compact turbines are characterized by small overall dimensions and can be of various types. Their compact design allows simple installation, with major turbine components transported to site pre-assembled. General description & our setup: The majority of turbine types can be effectively implemented in a compact solution, with setup similar to a simplified ...
-
Manufactured by Ganz Engineering and Energetics-machinery Manufacturer Ltdbased in HUNGARY
Makes it difficult to utilize remote but economically valuable areas, because of the costs and time-consume to build up an electricity network. Ganz EEM Llc., by its mini-hydro power station, offers a simple, fast and cost-effective solution to attach to the regional business the remote areas, rich in hydro power, but they are without built up electrical network, or has electrical network which ...
-
Manufactured by CINK Hydro - Energy k.s.based in CZECH REPUBLIC
We specialize on isolated operation (from a single hotel to factory to villages of several thousand households in remote areas). For simple and fast realization of a micro or mini hydro power plant, most of all in remote areas with difficult access to building materials, labour, construction machines, etc., we offer a compact SHPP system placed inside a robust high-quality container, which is ...
-
Manufactured by Entec AG Consulting & Engineeringbased in SWITZERLAND
The digital control system DTC-Vario is the most recent development of entec for controlling, supervision, protection, data acquisition and visualisation of small hydro power stations. Based on a hardware from SAIA, entec developed the appropriate software. Entec’s long term experience in the field of small hydro power stations is reflected by versatile possibilities of this ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you