Hydro Energy Software

The CADET Edge is part of the CADET range of control systems, designed specifically for dynamometer control and engine throttle actuation. The CADET system can actuate eddy current, hydraulic, AC or DC dynamometers and will be supplied with the appropriate power modules.

By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

Short-term production optimisation. Powel Optimal Hydropower is an optimisation tool used for short-term planning in hydropower systems. Short-term planning is production planning with time horisons of up to a few weeks, with the purpose of utilising the water in manner that maximises the revenues for the produced power. Powel Optimal Hydropower ...

By Powel AS based in Trondheim, NORWAY.

3DynaFS-Comp - The 3DynaFS compressible flow module solves the Euler equations using a 2nd order Godunov-type method to capture accurately the location of discontinuities such as shock waves and contact surfaces. The code uses a Level Set method and a mixed cell algorithm to simulate multi-phase and multi-material flows. A general Equation of ...

By Dynaflow, Inc. based in Jessup, MARYLAND (USA). from 3DynaFS Software line

proWAVE software is an Oceanlinx tool which allows one to model a wave energy converter (WEC) as a fully integrated system including oscillating water column (OWC), turbine, generator, flywheel, and all manner of controls features.

By Oceanlinx Limited based in Macquarie Park,, AUSTRALIA.

An Excel 2003 spreadsheet that calculates unit settings to maximize energy production efficiency to meet either a specified electrical load or to achieve a specified discharge for small and medium sized hydro plants. The spreadsheet uses dynamic programming techniques. Developed with the assistance of Natural Resources Canada. Download the ...

By CddHoward Consulting Ltd. based in Victoria, BRITISH COLUMBIA (CANADA).

Optimization in general, is the search for a feasible operational policy that maximizes or minimizes the value of the objective function. Hydropower is non-linear function though the operation problems in hydropower are non-linear problems. The best solution to non-linear problems can be obtained by application of non-linear optimization ...

By Allocate based in Albany, NEW ZEALAND.

3DynaFS-Bem is a general-purpose simulation tool for nonlinear dynamics of 3D free surface flows and their interactions with submerged or floating structures.

By Dynaflow, Inc. based in Jessup, MARYLAND (USA). from 3DynaFS Software line

Inflow forecasting is essential to keep control of your resources. By managing your resources in an optimal way, you are able to plan the power production and maximise revenue from your assets. Inflow forecasting depends on several elements - weather forecasts, snow cover, ground conditions and the landscape. Powel inflow modeling and forecasting ...

By Powel AS based in Trondheim, NORWAY.

SIMAHPP 4 Professional is the latest release of SIMAHPP series. SIMAHPP 4 Professional is an easy to use windows based simulation tool to evaluate the feasibility of hydropower projects. It is initially designed to simulate small hydropower systems of up to 10 MW but now, thanks to the newly added financial module, it can also simulate larger ...

By Hydroxpert Technology based in Meylan, FRANCE.

Custom-designed hydropower optimization tool.

By Power Vision Engineering Sarl based in Ecublens, SWITZERLAND.

HYKAS is a powerful program, allowing dimensioning and detection of sewerage networks while meeting all standards for state-of-the-art hydraulic calculation software. Based on latest software technology, HYKAS provides you with all required calculation methods for dimensioning and detection of sewerage networks.

By Rehm Software GmbH based in Berg/Ravensburg, GERMANY. from SEWERPAC Software line

COPA-DATA is an official and worldwide member of Microsoft’s CityNext initiative and profoundly contributes to establishing Smart Cities. Smart City solutions with zenon can considerably support governments and its citizens to face the challenges of tomorrow, especially in the areas of energy, water/waste water, public transportation and ...

By COPA-DATA GmbH based in Salzburg, AUSTRIA.

Formulation, evaluation, comparison and optimisation of alternative power system expansion plans.

By Power & Water Systems Consultants Ltd based in Dorking, UNITED KINGDOM.

MICROTREMOR uses spectrum analysis to get the predominant period and frequency of a site from ground motions. The amplitude or power spectrum and H/V spectral ratio can be plotted together.

By Geogiga Technology Corp. based in Calgary, ALBERTA (CANADA). from Surface Wave Software line

Simulation software for the analysis of electrical power networks, adjustable speed drives and hydraulic sytems.

By Power Vision Engineering Sarl based in Ecublens, SWITZERLAND.

The essential software tool for: hydroelectric project developers, consulting engineers performing feasibility studies and preliminary project designs, water power systems educators. TURBNPRO is the only software of its kind created to develop information on hydraulic turbines, their selection and application under specific site conditions.

By Hydro Info Systems based in Fairfield, NEW JERSEY (USA).

Unit allocation / commitment is the process of deciding when and which generating units at each power station to start-up and shut-down. This process is very complicated when 2 or more generating units are considered due to the fact that the number of combinations increases exponentially with the number of available generating units. To solve this ...

By Allocate based in Albany, NEW ZEALAND.

SIMAHPP is a Windows ased tool for hydropower projects analysis and energy simulations  using hydraulic, financial, and environmental parameters. It provides detailed analysis and results on energy production, economic analysis, environmental impacts, equipment and material selection. Since its release in 2009, SIMAHPP has been used in more ...

By Hydroxpert Technology based in Meylan, FRANCE.

Thetis Energy Ltd was formed to investigate the potential for the production of marine energy off the coast of Northern Ireland. Established in 2008 and wholly owned by B9 Energy Offshore Developments Ltd, the company aims to identify the feasibility for a utility-scale (100-200 MW), commercially viable marine tidal scheme near Torr Head, off the ...

By B9 Organic Energy Limited based in Larne, UNITED KINGDOM.

With all relevant data in hand, owners of MW wind turbines can enhance the strategic planning of operation and maintenance - and gain better performance.

By Spica Technology ApS based in Silkeborg, DENMARK.