Incineration Articles

An Easy Help guide to the Charcoal Machine

The right charcoal making machine can modify all kinds of biological waste materials right into a top-quality charcoal with extensive utilization in this modern era. Charcoal and biochar happen to be an important support to the agricultural and industrial world since time immemorial along with the need for this valuable item is not intending to become obsolete. Furthermore, top-quality charcoal ...

Aug. 4, 2021

By BESTON (Henan) Machinery Co., Ltd | BESTON Pyrolysis Machinery

Fired-up in Eastern Ontario: Responsible Energy gets go-ahead to build...

There was much criticism in the summer of 2013 when the Region of Durham held a celebration over the opening of its energy-from-waste facility. I did not criticize them, knowing the pain and effort many of the staff and politicians went through to get the facility built. If it had been a landfill solution vs. an incinerator, a party would have also been deserved. The fact of the matter is that ...

Jul. 20, 2021

By Responsible Energy Inc.

Shredding of RDF, TDF and SRF

Energy recovery via RDF shredder in a power plant producing from refuse-derived fuels is prevalent in 1990. Tons of waste dormant in landfills are not reusable or recyclable but can be a great source of fuel because they contain a high caloric value. Similar to RDF shredder, TDF shredding and SRF shredding use two shaft shredders to downsize the waste. Understand MSW/RDF/TDF/SRF MSW: Abbreviation ...

Jul. 18, 2021

By Wiscon Envirotech Inc.

An H2 Future: GE and New York Power Authority Advancing Green Hydrogen Initiative

The goal of using so-called "green hydrogen" in a multiprong approach to decarbonization took a big step forward last week when New York announced a demonstration project to assess the feasibility of using hydrogen-blend fuels in an existing power generation facility. Starting this fall, Gov. Andrew Cuomo announced, the New York Power Authority (NYPA) will conduct a pilot project to temporarily ...

Jul. 13, 2021

By GE Renewable Energy

The problem of NOx emissions

The problem of NOx emissions The problem with Nitrogen compounds (NOx) emissions is that they contribute to generating the greenhouse effect. For example, N2O causes 300 times more damage than CO2. In addition, NOx combines with the humidity of the air in the atmosphere and is the cause of acid rain and is therefore very dangerous for the environment. ...

Jun. 21, 2021

By TECAM

Keep Flowin`: GE Spins Up Supercomputer Models to Zero in On Energy Loss in Turbines

High-pressure turbines are complex pieces of engineering and vital components of gas turbines used to propel jet engines. The more efficient these jet engines are, the better the outcomes for the aircraft industry. The turbine blades rotate behind the combustion chamber in an engine, and they must endure the hot gas that spews out, accelerating them to high speeds. Because they are crucial to ...

Jun. 16, 2021

By GE Renewable Energy

A Few Ways To Get A Pyrolysis Plant Cost Estimate

Prior to put money into any industrial equipment, it is extremely important to determine exactly what the total price is going to be. This can only be carried out by requesting these details from manufacturers that can sell this equipment to you personally. Whether this is certainly obtained from a spot nearby, or from your completely different country, knowing the initial value of this devices ...

Jun. 15, 2021

By BESTON (Henan) Machinery Co., Ltd | BESTON Pyrolysis Machinery

A Simple Guide to the Charcoal Machine

The proper charcoal making machine can transform all types of biological waste matter right into a top-quality charcoal with extensive use within this modern era. Charcoal and biochar are already a significant support to our own agricultural and industrial world since time immemorial as well as the requirement for this valuable item is not intending to become obsolete. Furthermore, top-quality ...

May 31, 2021

By BESTON (Henan) Machinery Co., Ltd | BESTON Pyrolysis Machinery

Wood Charcoal Making Machine- Essential Things To Know

Since the name implies, wood charcoal making machine takes wood scraps and turns them into high-quality charcoal. Wood charcoal is, without a doubt, one of the oldest resources for energy for humanity and it has numerous uses today. The charcoal making methods are many, but nowadays, wood chips charcoal making machine for sale has observed a tremendous demand due to the efficiency and wide ...

May 26, 2021

By BESTON (Henan) Machinery Co., Ltd | BESTON Pyrolysis Machinery

6 Tips to Make Your Landscape Lighting Environment-Friendly

Lighting is a critical aspect of the outdoors. It brings value and character to space by drawing attention to textures, colors, and forms of an area. Hence, lighting helps outdoor spaces achieve their true value by highlight the flora and the architectural details. Most people aim at creating breathtaking landscape lighting to draw attention to their homes. But it is one thing to create a ...

May 25, 2021

By GharPedia

Zhongke Ecology Wuzhong City Waste Incineration Sludge Disposal Project - Case Study

PROJECT BACKGROUND Project: Zhongke Ecology Wuzhong City Waste Incineration Sludge Disposal Project Sludge Type: Centralized Disposal Sludge Construction: Jan., 2020 Sludge Scale: 100T/D Completion: Mar., 2020 PROJECT OVERVIEW Equipment Selection: SBWHD40000'2 Dewatering Machine: Mechanical Wet Moisture: 85% Dried Moisture: 35% Features Efficiency Innovation Environment ...

May 20, 2021

By Guangzhou Shincci Energy Equipment Co., Ltd.

General Information On The Coconut Shell Charcoal Making Machine

The coconut shell charcoal making machine is the ideal solution for being enviromentally friendly. With this state-of-the-art machine, you're going to be able to easily process as much as 3 a great deal of shells inside an hour. Due to the continued development of technology, the coconut shell charcoal making machine will more than exceed your expectations. Our article features even more ...

May 17, 2021

By BESTON (Henan) Machinery Co., Ltd | BESTON Pyrolysis Machinery

Project Examples

Since the beginning Shell Engineering & Associates, Inc. has consulted for nearly every type of regulated facility…from the smallest to the largest…with custom projects to fit each facility’s unique goals. Major Sources | Intermediate Sources | Minor Sources | Even Smaller Sources Types of industries we have served: Electric Utilities Mining and Processing ...

Apr. 19, 2021

By Shell Engineering & Associates, Inc.

Biomass Briquetting Plant For Processing Agro Waste

Fuel sources are required for a number of thermal applications like boilers, heaters, dryers and usually conventional fuel sources like coal, charcoal, diesel, petrol and liquid fuel are used. However these fossil fuel sources are expensive and polluting, containing sulphur, fly ash and other atmospheric pollutants which damage the environment. So increasingly businesses are using a biomass ...

Apr. 6, 2021

By Zhengzhou Fusmar Machinery Co.,Ltd

Making the Case for Lighting & Control Solutions in Warehouse Application

Warehouses and distribution centers are sizeable, active spaces, with many components. From pallets and people driving forklifts to conveyer belts and HVAC systems. Most warehouses operate on a 24/7 schedule and due to the massive size of these facilities, it can be very hard to pinpoint where energy waste is occurring. But implementing a few changes like upgrading to efficient lighting and ...

Apr. 4, 2021

By Leviton Manufacturing Co., Inc.

Leveraging 3D Measurement Technologies in Power Plants

When power plants conduct overhauls and ad hoc maintenance, scheduled inspections need to be carefully planned out to ensure that downtimes are kept to a minimum and that operations can resume to full capacity as quickly as possible. To accelerate inspection processes during overhauls, forward-thinking power plant maintenance teams are increasingly combining traditional ultrasonic testing ...

Mar. 25, 2021

By Creaform Inc.

Why You Might Need A Complete Wood Pellet Production Line

A lot of people all over the world use wood pellets in order to make heat inside their homes. For those who have recently switched over, you realize that this particular heat is extremely consistent, but you do have to have the wood pellets. Some companies have recognize that the interest in these kinds of products is incredibly high, and it might be a great idea to consider going to this ...

Mar. 23, 2021

By BESTON (Henan) Machinery Co., Ltd | BESTON Pyrolysis Machinery

Ningbo Incineration Power Plant Leachate Treatment Project

Capacity: 500tons/day Influent water quality: COD: 300-1000mg/L, BOD5: 20-300mg/L, SS: 500-800mg/L, NH3-N<=30mg/L, TN<=120mg/L, Total hardness(as CaCO3)<=1200mg/L, Total Alkalinity(CaCO3): 2000-8000mg/L Effluent water quality: CODcr<=60mg/L, BOD5<=10mg/L, pH: 6.5-8.5, Fe<=0.3mg/L, Total hardness(as CaCO3)<=450mg/L, Total ...

Mar. 3, 2021

By Xiamen Jiarong Technology Corp., Ltd.

3 Enclosure Design & Cooling Considerations when Designing Electronics for Outdoors

When you require enclosure cooling for your sensitive electronic equipment, dealing with the outdoor elements can complicate things slightly. Without the constant ambient environment present as in most indoor facilities or the shelter provided by the building to shield the enclosure from precipitation and other outdoor elements, the enclosure can be subjected to much more extreme conditions when ...

Mar. 1, 2021

By Thermal Edge Inc.

Medical waste: waste-to-energy technologies for hazardous hospital waste

Nowadays and more than ever before due to the Coronavirus pandemic, millions of tons of waste are generated at hospitals, laboratories, health centers, clinics and other medical centers. Sensitive and hazardous materials that require specific treatment Medical waste is very sensitive material when it comes to its elimination due to its hazardous nature: the possibility of bacteria, equipment ...

Feb. 23, 2021

By TECAM