Chamber Incinerator (Chamber Incinerators) Equipment
-
Manufactured by Raschka Engineering Ltdbased in SWITZERLAND
Static incineration chamber mainly used for liquid and off gas ...
-
Manufactured by GEI Works, LLCbased in USA
GEI Thermal Oxidizer Model A 1.5 is a solid waste thermal oxidizer. Built as a modular, multiple chambered incinerator, this product is engineered for all mixed composition, solid waste ...
-
Manufactured by S.B Environmental Co, Ltd.based in CHINA
In addition to having two main combustion chambers (primary combustion chamber) and (secondary combustion chamber), our green incinerators have also (Mix combustion chamber) which is bigger to make sure long residency time in secondary combustion chamber, ensure full combustion, kill the virus ...
-
Manufactured by Radhika Engineersbased in INDIA
Incineration uses combustion to make infectious industrial waste harmless and reduce the waste mass and volume by more than 90 percent. Proper incineration can convert certain wastes into gases and incombustible solid residues (e.g., ash) that are relatively harmless. A dual-chamber incinerator operated within the optimal ...
-
Manufactured by Raschka Engineering Ltdbased in SWITZERLAND
A Rotary kiln is a pyroprocessing device used to raise materials to a high temperature in a continuous process, Raschka Engineering has applied such technology for solid waste incineration in combination with static (second) incineration ...
-
Manufactured by Kapa Engineering Srlbased in ITALY
In red you can see the specifications as defined by the Legislation and in black the standards followed by HEFAISTUS incinerator system. "Waste should be driven with automatic loading in the incinerator chamber" hefaistus incinerators are equipped by full automatic loading system. "The loading door can not be opened before ...
-
Manufactured by Advanced Combustion Engineeringbased in AUSTRALIA
Advanced Combustion Engineering 'Controlled Air Incinerators' are primarily designed for batch operation with a burning cycle of approximately two hours and a cooling cycle also of approx, two hours, depending upon the density and calorific value of the waste. Unlike conventional multiple chamber incinerators which have large quantities of ...
-
Distributed by US Global Resources (USGR)based in USA
and energy efficient and environmentally friendly since they are available with secondary chamber when needed. Our incinerators passed and met all the test requirements for incineration. All of our incinerators are EPA tested and NRCS approved. After incineration you would have only 2% ash remaining of whatever ...
-
Manufactured by Ing.Gallaratibased in ITALY
These are pyrolitic static incinerators (furnaces), with static incineration chamber and separated post combustion chamber (P.B.), which can be mounted either vertically (PSV type, mounted on the furnace itself) or horizontally (PSO - mounted in line with the furnace). ...
-
Manufactured by Thermal Lining servicesbased in INDIA
Design of this waste incinerators is typical. Solid waste has built in carbon which supports self combustion if it is loaded in the chamber where temp of 750 c is maintained. Hence we maintain the loading chamber temp to 750 C through Automatic Gas Burner, at this temp waste release its in built Heat and raise temp of chamber to ...
-
Distributed by Flextim Industry SRLbased in ROMANIA
The IncinerPro i500 is part of the range of incinerators with the main fixed combustion chamber and is recommended for the incineration of medium volume waste (e.g. chicken, pets, sheep, pigs (including sows), slaughterhouse, meat processing plant etc.) ...
-
Distributed by Flextim Industry SRLbased in ROMANIA
The IncinerPro i400 is part of the range of incinerators with the main fixed combustion chamber and is recommended for the incineration of small and medium volume waste (e.g. birds, pets, sheep, pigs, smaller quantity of slaughterhouse or from meat processing plants ...
-
Distributed by US Global Resources (USGR)based in USA
are available in different sizes and models from 100 lbs. capacity to 1,200 lbs. capacity and can be used for a variety of applications. These incinerators are made of high-quality materials and built to last for many years. They are fuel and energy efficient and environmentally friendly since they are available with secondary chamber when needed. ...
-
Manufactured by Nanjing Clover Medical Technology Co., Ltd.based in CHINA
Solid Chamber temperature 8000C -10000C. Gas Chamber temperature 10000C -12000C. Chamber Anti-Rate 14500C. Residency time 2.0 Sec. Burning efficiency >98%. Waste Lower Calorific Power ...
-
Manufactured by Nanjing Clover Medical Technology Co., Ltd.based in CHINA
Solid Chamber temperature 8000C -10000C. Gas Chamber temperature 10000C -12000C. Chamber Anti-Rate 13500C. Residency time 2.0 Sec. Burning efficiency >98%. Waste Lower Calorific Power ...
-
Manufactured by Nanjing Clover Medical Technology Co., Ltd.based in CHINA
Solid Chamber temperature 8000C -10000C. Gas Chamber temperature 10000C -12000C. Chamber Anti-Rate 14500C. Residency time 2.0 Sec. Burning efficiency >98%. Waste Lower Calorific Power ...
-
Manufactured by Nanjing Clover Medical Technology Co., Ltd.based in CHINA
Solid Chamber temperature 8000C -10000C. Gas Chamber temperature 10000C -12000C. Chamber Anti-Rate 14500C. Residency time 2.0 Sec. Burning efficiency >98%. Waste Lower Calorific Power ...
-
Manufactured by Nanjing Clover Medical Technology Co., Ltd.based in CHINA
Solid Chamber temperature 8000C -10000C. Gas Chamber temperature 10000C -12000C. Chamber Anti-Rate 13500C. Residency time 2.0 Sec. Burning efficiency >98%. Waste Lower Calorific Power ...
-
Manufactured by Nanjing Clover Medical Technology Co., Ltd.based in CHINA
Solid Chamber temperature 8000C -10000C. Gas Chamber temperature 10000C -12000C. Chamber Anti-Rate 13500C. Residency time 2.0 Sec. Burning efficiency >98%. Waste Lower Calorific Power ...
-
Manufactured by Nanjing Clover Medical Technology Co., Ltd.based in CHINA
Solid Chamber temperature 8000C -10000C. Gas Chamber temperature 10000C -12000C. Chamber Anti-Rate 14500C. Residency time 2.0 Sec. Burning efficiency >98%. Waste Lower Calorific Power ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you