Incineration Services
-
PremiumManufactured by Silcarbon Aktivkohle GmbHbased in GERMANY
By request we accept your spent activated carbon in our service center. Here we will decide whether the activated carbon can be thermally reactivated or must be discarded by incineration. The decision, how to process the exhausted activated carbon depends on the type and amount of adsorbed ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
INCINER8 have many years experience in the design and supply of waste incinerators. Due to the broad nature of end users we have seen almost all sizes and scales of operation and types of waste that need incinerating. Whether you need the incinerator purely to burn waste or it is just a part of a larger process (such as the combustor for a waste to energy solution) or for cleaning paint or ...
-
PremiumManufactured by Ecological Laboratories, Inc.based in USA
Anaerobic Digestion has been used historically for digesting waste activated sludge to reduce the volume for disposal and also for treating high strength, low volume organic wastes to save energy. Recently, corn silage, food waste, animal manure, and slaughterhouse waste and other materials with a dense organic content are used as effective feedstock for the production of biogas. With increasing ...
-
based in GERMANY
AVG's high-temperature incineration plant is the focal point of an efficient disposal centre. In addition to the incineration process, we treat 30,000 tonnes of inorganic liquids or oil-and-water mixtures every ...
-
Manufactured by Atlas Incinerators ApSbased in DENMARK
Sole supplier of spare parts: We are the sole supplier of original spare parts to incinerators supplied by ATLAS, Hyundai-ATLAS, ASI, ASWI VESTA and MAXI. Technical service: We have a team of technical experts ready to travel to you when you need service.If you contact us, we will assist with getting the right people to you as soon as possible. Remote support: Our inhouse team is experienced ...
-
by COWI A/Sbased in DENMARK
Cost-benefit analyses and assessments are in great demand by public as well as private customers. COWI provides transparent analyses based on state-of-the-art ...
-
based in UNITED KINGDOM
Do you need to improve your sustainability profile? Are you seeking solutions to increase your recycling rates? Are you complying with the Waste Hierarchy? The waste industry is continually developing and investing in ‘greener’ disposal routes that seek to turn waste products into usable products or energy. Renewable technologies including composting, anaerobic digestion (AD), waste ...
-
Manufactured by Enerkembased in CANADA
A lower-cost option for waste management than incineration or landfilling. Converting waste into biofuels and chemicals with Enerkem’s technology is competitive with landfilling and less capital intensive than incinerating waste – actually 2x more capital efficient per ton of waste ...
-
Manufactured by DrySoTec GmbHbased in GERMANY
In order to be able to elaborate the optimum solution, a situation analysis has to be carried out first. For this purpose, all important factors, such as, e.g., type and quantity of the incinerated materials, pollutant values and volumetric rates of flow, have to be determined. Since the plant operators are often not in a position to determine the required parameters themselves, our engineers ...
-
based in GERMANY
We offer following services: Consulting around rotary kiln technologies, Stress calculation of (existing) indirect heated rotary kilns, Layout and detailmechanical design by PTC/Creo OneSpaceModeller, R+I by Cadison, Pre-projecting, Checking of documents, HAZOP/FMEA, Supervising, Technical consulting & ...
-
Manufactured by Rowan Food and Biomass Engineering Ltdbased in UNITED KINGDOM
Over the years the company has worked in many different sectors and in many different parts of the world doing business with small independents to large multinational companies. We have vast experience in the animal feed milling industry where we have been asked to perform many different roles from main design consultants to installing full plants. Recent years has seen the emergence of the ...
-
based in USA
Going Green... it's no longer a concept of the future. Green Energy is in many cases one of the biggest factors in new designs today. Here at Norton Engineering, we try to incorporate green energy concepts in our designs whenever possible (especially when it makes economic ...
-
Manufactured by Cremation Systems, Division of Armil CFS, Inc.based in USA
Cremation Systems’ service technicians inspect, repair, and troubleshoot cremation equipment manufactured by Matthews, B&L Cremation, US Cremation, Facultatieve, CMS, and American. Cremation Systems’ technicians can perform the following services: Hearth Repair – Cremation Systems can repair or replace worn hearths in cremation retorts. Wear under burners can often be ...
-
based in DENMARK
A typical inspection at a Waste-to-Energy plant will take place in 2 steps.The first step is a visit while the plant is in operation. Dublix Engineering will carry out the following:Mechanical inspection from outside of the furnaceEvaluation of the combustion processIdentification of limitations and possible areas of improvementsDiscussion with the plant management about the current operation ...
-
based in USA
The Acterra Group has experience in providing development, construction, and finance consulting for all major renewable energy technologies. Our experience extends across biomass, alternative fuels, wind, solar, and other emerging technologies. Acterra has been involved with renewable development for over 10 years. As the need for renewable energy sources becomes more imperative for our ...
-
Manufactured by Westland Environmentalbased in CANADA
Waste incineration is the thermal oxidation of combustible matter with oxygen (from air) at sufficient temperatures to ignite the waste. The combustion design also generates heat sufficient to destroy volatile contaminants in the hot gases before being emitted through the stack. Cyclonator incinerators can be modified to recover energy contained in the waste ...
-
based in USA
Clean Harbors is the industry"s leading provider of high-tech, high-temperature destruction of hazardous and industrial waste. Broad permit capabilities and high throughputs deliver maximum convenience and efficiency to customers. With nearly 70% of North America"s incineration capacity, our six incineration facilities in the U.S. and Canada ensure we can meet any requirement from any customer. ...
-
based in USA
Let U.S. Energy Services help you take control by converting complex energy data into useful information for your business. We evaluate your company"s needs and offer solutions for your data. We offer a full scope of deliverables for organizations ranging from single-site to large, multi-site, international ...
-
based in GERMANY
The actual basic price at electricity market as well as the additional allowance acc. to the CHP legal regulation forced considerations on side of the Mainova AG about optimized use of the existing energy potential. Aim oft he above mentioned services was to compile a technically and economically optimized plant concept both for the heating plant as well as for the adjacent energy-from-waste ...
-
Manufactured by Tetronics Technologies Limitedbased in UNITED KINGDOM
Providing Air Pollution Treatment solutions for over 20 years; Tetronics has been providing clean plasma technology to its customers for over 20 years particularly for the management of fly ash and Air Pollution Control residues (APCr) generated from incinerators and other Waste to Energy (WtE) processes. Tetronics offers world leading clean and cost effective technology to deal with APC and fly ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you