ash testing News
-
Carbolite gero CAF G5: a new generation of ash fusibility furnaces
When coal is combusted in the furnace of a power plant a powder-shaped residue or a glassy slag (clinker) forms and must be removed. Large coal furnaces suffer from clinker build-up and therefore expensive maintenance due to closure for removal of clinker. If the fusibility characteristics are known, control of temperature can avoid clinker formation. Ash fusibility testing is designed to ...
-
Computrac® MAX® 5000XL moisture and ash analyser.
Able is pleased to announce the release of the The Computrac® MAX® 5000XL moisture and ash analyser. The Computrac® MAX® 5000XL advances the state of the art rapid moisture and ash analysis with a new temperature controlled balance that provides users with more stable and accurate measurements. The new instrument also features a temperature ramp control feature that allows the ...
-
Introducing the Computrac Vapor Pro XL
Arizona Instrument LLC is proud to announce the release of the Computrac Vapor Pro XL – the latest in a long line of accurate, reliable and easy to use moisture analyzers. About the Vapor Pro XL The Vapor Pro XL is a chemical free, moisture specific alternative to Karl Fischer titration. It features an upgraded heater, which increases the upper limit for testing temperatures to 300°C ...
-
Emission rules tighten for medical waste incinerators
The U.S. Environmental Protection Agency's new limits on air emissions will affect most existing hospital, medical, and infectious waste incinerators (HMIWI). This final action will reduce about 390,000 pounds of several pollutants each year including acid gases, nitrogen oxides, and metals such as lead, cadmium, and mercury. The agency also is finalizing additional testing, monitoring, and ...
-
ASTM D7484 - 11 Standard Test Method for evaluation of automotive engine oils for valve-train wear performance in Cummins ISB medium-duty diesel engine
This test method was developed to assess the performance of a heavy-duty engine oil in controlling engine wear under operating conditions selected to accelerate soot production and valve-train wear in a turbocharged and aftercooled four-cycle diesel engine with sliding tappet followers equipped with exhaust gas recirculation hardware. The design of the engine used ...
-
ASTM D975 - 11b Standard Specification for Diesel Fuel Oils
This specification covers seven grades of diesel fuel oils suitable for various types of diesel engines. These grades are: Grade No. 1-D S15; Grade No. 1-D S500; Grade No. 1-D S5000; Grade No. 2-D S15; Grade No. 2-D S500; Grade No. 2-D S5000; and Grade No. 4-D. The requirements specified for diesel fuel oils shall be determined in accordance with the following test methods: flash point; cloud ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you