combustion chamber News
-
Working principle of sludge incinerator
The working principle of sludge incinerator: batch feeder puts the sludge of intermittent feeding door into the converter and opens the combustion by automatic temperature control. According to the principle of combustion three t (temperature, time and swirl), the combustion chamber is completely oxidized, pyrolyzed and burned in the combustion chamber of the furnace. The flue gas after burning ...
-
Calculation of the heat impacts of a biogas flare
The CERC consultancy team recently completed a heat impact assessment for an enclosed biogas flare using ADMS 5. We assessed the worst case heat impact of the proposed flare on adjacent site buildings. The results informed the choice of a safe combustion chamber height for the flare installation. The flare source characteristics were based on typical biogas compositions for minimum and maximum ...
-
Cyclone Power Technologies Receives Sixth U.S. Patent for its Green Engine
POMPANO BEACH, Fla.- Cyclone Power Technologies (Pink Sheets: CYPW) announced today that the U.S. Patent and Trademark Office has issued a Notice of Patent Allowance on the pre-heater coil of the Company’s heat-regenerative external combustion engine. The patented pre-heater coil serves two important functions for the Cyclone Engine. First, it absorbs heat from expanding steam at the ...
-
Dramatic energy savings thru heat storage shutdown mode
The Environmental and Energy Systems division of Dürr Systems has developed the Heat Storage Shutdown (HSS) mode which optimizes the energy savings from almost any off-production RTO. This is significantly more energy efficient than the set-back or idle mode because in each of these there still remains considerable burner and electrical demand. The HSS mode enables the RTO fan and burner to be ...
-
Complex issues with incinerating liquid and gaseous residues
Production processes in the chem-ical and pharmaceutical industries give rise to gaseous and liquid residues that are preferably disposed of in decentralized incinerators. Most of these residues are highly caloric gases and solutions containing high concentrations of organic substances. The complexity of these often toxic substances requires the use of special equipment for the incineration ...
-
Cyclone Power Technologies Receives Fifth U.S. Patent for Its Green Engine
POMPANO BEACH, Fla. - Cyclone Power Technologies (Pink Sheets: CYPW) announced today that the U.S. Patent and Trademark Office has issued a Notice of Patent Allowance on the centrifugal condenser of the Company’s heat regenerative external combustion engine. The patented centrifugal condenser, comprised in part of 40 stacked aluminum plates with over 60 sq.ft. of total surface space, ...
-
How To Build The Carbonization Kiln More Durable Charcoal Briquette Machine
In the charcoal briquette production line equipment, the production of mechanism charcoal needs a carbonization furnace. If you buy a good carbonization furnace, you can produce high-quality machine-made charcoal. Of course, if the wrong carbonization furnace is selected, the charcoal produced is not ideal. Therefore, you must be cautious when buying carbonization furnaces and identify the brand. ...
-
Pyrolysis incinerator through furnace section combustion
The pyrolysis incinerator burns the waste in the reduction atmosphere of the pyrolysis furnace by stages, and the combustible product enters two combustion chambers to realize the complete combustion of the incinerator. The pyrolysis incinerator has the advantages of advanced technology, reliable process, simple operation, safe (disposable feeding, disposable slag removal), low investment (no ...
-
Korea Approves Patent on Critical Component of Cyclone Power Technologies’ Green Engine
POMPANO BEACH, Fla. - Cyclone Power Technologies (Pink Sheets:CYPW) announced today that the Korean Intellectual Property Office has issued a notice of decision to grant the company a patent on the steam generator of its award-winning, heat regenerative external combustion engine. The steam generator is a critical component of the eco-friendly Cyclone Engine, as it creates high thermal ...
-
The Significance of Curing a Cremator at the Manufacturing Facility
Curing is a crucial step in the manufacturing process of cremators that cannot be overlooked. It is a process that involves maintaining a specific temperature and humidity level to harden and strengthen the structure of the cremator. Neglecting this step can have a significant impact on the #performance and #longevity of the cremator once it is installed on clients' sites. Curing a cremator at ...
-
CPI Installs Thermal Combustor System at Adhesive Manufacturer
Catalytic Products International (CPI) recently installed a Thermal Combustor System (TCS) for the abatement of Volatile Organic Compounds (VOCs) at a Southern USA adhesives manufacturer. The new 3,600 SCFM enclosed Thermal Combustor System (TCS) will control VOC emissions from reactor vessels with 99% destruction rate efficiency (DRE). The off gas tank emissions contain nitrogen, ...
-
Start your car with a laser to cut your carbon
Engineers at the University of Liverpool, working with the Ford Motor Company, have received a £198,910 grant from the Carbon Trust to develop a laser ignition system which could cut car exhaust emissions. Transport accounts for 25% of UK carbon emissions so finding new ways of making automotive engines less polluting is vital to meet the UK’s carbon reduction targets. Replacing conventional ...
By Carbon Trust
-
U.S. PTO Approves Additional Patent Protection For Cyclone Power Technologies’ Green Engine
POMPANO BEACH, Fla.- yclone Power Technologies (Pink Sheets: CYPW) announced today that the U.S. Patent and Trademark Office has approved the company’s second overall patent on its heat-regenerative, external combustion engine. This latest action marks the seventh patent issued on Cyclone’s engine and its various, unique components. The Cyclone engine is a modern steam engine, ...
-
Neste Oil and Lufthansa satisfied with results of renewable aviation fuel trial
Neste Oil CorporationPress release15 March 2012 at 2 pm (EET) Neste Oil and Lufthansa satisfied with results of renewable aviation fuel trial Neste Oil and Lufthansa tested Neste Oil's NExBTL renewable aviation fuel on a total of 1,187 flights between Frankfurt and Hamburg last year and one intercontinental flight between Frankfurt and Washington D.C. this year. Factors such as fuel quality, ...
By Neste
-
Moving Grate Waste to Energy Solutions
New for 2019 - a range of small scale waste to energy solutions aimed specifically at the waste management industry. Suitable for RDF and MSF waste streams. We identified the need to provide an all-inclusive W2E system allowing serious waste management from storage and feed through to final conversion of the heat and gases into energy. From the technological and commercial standpoint this system ...
-
Edina launches new 'super efficient' 10MW MWM genset
The new genset provides exceptionally high electrical efficiency of up to 48 percent and a total efficiency of up to 93 percent, achieving outputs of 9,830kWe to 10,300kWe. "This innovative new MWM technology will provide higher cost savings and improved environmental performance and resilience for industrial customers and peaking plant developers", said Hugh Richmond, CEO of Edina. The ...
By Edina Group
-
Key Elements of a Small Charcoal Making Machine 2023
The use of small charcoal making machines is rising because of the advantages they have. These machines are able to produce high-quality charcoal inside a short amount of time, plus they are easy to operate. Additionally, small charcoal making machines are affordable and may be used by anyone. If you are looking for an efficient strategy to build your own charcoal, then the small charcoal making ...
-
Solid waste incinerator for commercial, industrial and medical industries
Granite Environmental solid waste incinerators provide a safe and effective solution for solid waste disposal in environmentally sensitive and remote locations. Incineration is a waste treatment technology for the controlled combustion of waste organic materials and substances. Our company has four models for commercial and industrial waste incineration available. Key Elements For Incinerator ...
-
The first Allburn incinerator is heading for Africa
It is only a little over two months since we announced the launch of our new competitively priced Allburn range of waste incinerators, but already this cost-conscious concept has proved to be so attractive that we have completed our first order and it is now ready for shipment to Guinea in West Africa. We introduced the Allburn brand in a bid to meet the requirements of those customers who, ...
-
Cyclone Power Technologies Receives Purchase Order for Two Waste Oil Gensets from Phoenix Power Group
POMPANO BEACH, Fla.- Cyclone Power Technologies (Pink Sheets: CYPW) has received a purchase order from its licensee Phoenix Power Group (PPG) for two waste oil power generators. The renewable power systems are scheduled to be delivered by the end of the year for field testing with PPG’s nationwide distributor, Clean Burn, the world leader in waste oil furnaces and boilers. The new Phoenix ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you