heat exchanger News
-
HRS Highlights Steam Injection for Food Sterilisation
After an exceptional year, HRS Heat Exchangers is delighted to be returning to the Foodtech Packtech event in Auckland in April and will be showcasing its DSI Series of direct steam injection pasteurisers and sterilisers which are ideal for food products such as plant-based milk drinks. The benefit of sterilising using direct steam injection is the speed of the process, with sterilisation ...
-
There is the FAMET S.A. offer of new, innovative heat exchanger with baffles made on the basis of its own patented solution
The modern Monolith Baffle® makes possible to flow of the medium in the shell side heat exchanger along the tube bundle in longitudinal way therefore the pressure drop is minimized and heat exchange efficiency is increased in compare with heat exchangers equipped with traditional segmental baffles. Also, the tube bundle vibration are completely eliminated. Fabrication of Monolith Baffle® ...
By FAMET S.A.
-
Hybrid Heat Exchanger grants CO2 reduction
Four fully welded Hybrid heat exchangers for a fermentation residue evaporation plant of an East German manufacturer of biofuels were certified by TÜV Süd inspectors. Our plate heat exchangers are compliant with the Pressure Equipment Directive (PED - 2014/68/EU). Usually, fermentation residues still contain a high amount of water which will be squeezed by our fully welded Hybrid heat ...
-
Providing Large-Scale Gas Heat Recovery for Chemical Processing
HRS have supplied a K Series large gas heat exchanger for a Belgian chemical plant to cool the exhaust gases leaving a catalytic reactor (which can reach temperatures of up to 500 deg. C) and use the recovered heat to pre-heat the cold gases entering the reactor. HRS Sales & Process Engineer Antonio Jara explains: “Every HRS heat exchanger is designed specifically for the ...
-
Kenics® heat exchangers offer high heat transfer coefficients
Chemineer, Inc. offers Kenics® Heat Exchangers. Equipped with streamlined Kenics Static Mixer elements, Kenics Heat Exchangers are the most efficient units available today. These high-performance thermal units offer maximum transfer rates even with highly viscous, difficult-to-process materials. Used in a wide range of process applications, Kenics Heat Exchangers require less space, less energy ...
-
Kenics™Heat Exchangers are Superior to Conventional Empty Tube Heat Exchangers
Kenicsheat exchangers offer a highly efficient design consisting of streamlined Kenicsstatic mixer elements for superior performance compared to conventional straight, empty tube heat exchangers. Conventional straight, empty tube designs allow laminar build up from the process fluid on the internal tube walls which inhibits flow and diminishes the heat transfer process.Kenics heat exchangers use ...
-
Delivery of heat exchangers for the new gas and steam unit at the Żerań CHP Plant in Warsaw
A gas and steam unit with an electric power output of 450 MWe and thermal output of 255 MWt is currently being built at the Żerań CHP Plant in Warsaw.It is a most modern facility of this type in Poland that will use high-performance and modern gas technologies to meet the strictest European environmental criteria. Famet as a company with high engineering competence and equipped with a ...
By FAMET S.A.
-
HRS Celebrates 40th Birthday
Early Years Back in the early 1980s the world was still feeling the aftershocks of the oil crises of the 1970s and energy efficiency was becoming a key concept across various industries. As part of this agenda, heat recovery technology was gaining in popularity, and Steven Pither, who until the acquisition was CEO of the HRS Group, recognised that these trends were only going to become more ...
-
Process Skids Make Heat Exchange Solutions Easy
Modular process skids have become popular in the food industry due to their ease of transportation and installation. HRS Heat Exchangers has produced skid-mounted versions of numerous products and systems, for a wide range of applications including pasteurisation, cleaning in place (CIP), aseptic packing, heating, and cooling to name a ...
-
Dielectric Heat Exchanger Test Rig
Commisioning is underway for a dieletric oil cooler test rig. Providing 18 kW of oil temperature control and 15 kW of pure water control with optional air cooling, the facility will achieive a 0.8% heat balance across it operating range with flow rates upto 60 lpm. Customers seeking hybrid, battery, electric motor and electronics cooling system development will be provided with an automated test ...
-
Introduction to the maintenance method of spiral plate heat exchanger
Spiral plate heat exchanger is one of the most widely used equipment in industrial equipment. As the main equipment in the process of preheating, waste heat recovery, refrigeration, etc., it has made outstanding contributions to energy saving. Spiral plate heat exchanger is widely used in industry , Civil, and other fields, due to improper maintenance of the heat exchanger during use, it will ...
-
Heat exchanger blockages eliminated and acid cleaning no longer required
Kaish Foods is one of the oldest food Companies in Jordan, established in 1926. The water in Amman the capital of Jordan is hard with the impact that the shell and tube heat exchanger in the Tetra-Pak machine used become increasingly inefficient and then after 500 hours of operation would become blocked with scale and the production process would have to be stopped whilst the heat exchanger was ...
-
Komax Systems, Inc. Launches a Jacketed Heat Exchanger for Sludge Heating
Komax Systems, Inc. Launches a Jacketed Heat Exchanger for Sludge Heating Non-fouling Klean-Wall™ Static Mixer Heat Exchanger provides the best solution for sludge and slurry heating and cooling applications Wilmington, CA--Komax Systems, the leader in static mixer heat exchangers announces the release of a non-clogging high efficiency sludge heat exchanger. This heat exchanger ...
-
Report Highlights European Biogas Potential
HRS Heat Exchangers welcomes a recent Statistical Report by the European Biogas Association (EBA) which shows that by 2050, as much as 40% of Europe’s total gas consumption could come from sustainable biomethane. We also welcome the focus that the report gives to the importance of creating sustainable uses and markets for digestate, without which such ambitions will not be realised. The ...
-
HRS Heat Exchangers Acquired by Exchanger Industries Limited
Exchanger Industries Limited (EIL), the Canadian market leader and globally recognised designer and manufacturer of heat transfer products for the energy, petrochemical, industrial and clean power generation sectors, has acquired HRS Heat Exchangers Ltd (HRS). Financial terms have not been ...
-
HRS Agrees ‘Anaerobic Digestion Dangerously Overlooked’
The Inter-Governmental Panel on Climate Change (IPCC) recently published its sixth assessment report on climate change which painted an alarming picture of the global effects of climate change and the need for immediate action to reduce the impact of greenhouse gas (GHG) emissions on the environment. In particular the IPCC report identified that urgently tackling emissions of methane is a ...
-
Natural gas experiences strong growth within the EU
Gasunie chooses Tranter and sets its sights on becoming the biggest gas distributor in Northern Europe Demand for gas within the EU is steadily increasing, whilst extraction levels in Europe are falling. In addition to holding around 50% of the EU's natural gas reserves, the Netherlands is also focusing heavily on becoming a gas distribution hub for Northern Europe. The company leading the way in ...
-
VAU gets the steam up!
Delivery and installation of worldwide unique six-stage hybrid plate heat exchanger completed in record time After just 13 months production time, it’s done: Six hybrid plate heat exchangers with a total of more than 6,000 square meters of heating surface at a weight of 19 tons each were delivered with additional containers in full and on time to BENEO. Thanks to the precise and complete ...
-
Anguil Environmental Systems has added a Plate Heat Exchanger to their list of energy conservation products
Anguil Environmental Systems has added a Plate Heat Exchanger to their list of energy conservation products. The new offering will supplement their shell and tube exchanger product line offering customers the opportunity to achieve greater energy efficiency. With rising energy costs, manufacturers recognize the need to reduce energy costs and are striving for greater energy efficiency. ...
-
Combined Companies have more than 100 Years’ Experience
Exchanger Industries was founded in Calgary, Alberta by Howard Thom in 1961 as Exchanger Sales and Services to manufacture tubular heat exchangers. By 1964 the company was also manufacturing air-cooled heat exchangers, sulphur condensers and waste heat boilers, which still remain core products to the present day. Exchanger Industries specialises in large-scale fabrication and solving complex ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you