tube heat exchanger News

Tetrapak, Alfa Laval, Westfalia, Cream separators and Sialex®Ring.

Tipperary Co-operative, use Sialex®Ring to help control "Scaling" on Plate Heat and Shell and Tube heat exchangers on their " hot water circuits". A further area suitable to benefit from Sialex® is in the Cream separators. These devices are prone to "Scale" build up on flushing jets. Cleaning requires did-assembly and cleaning. This can occur several times during a year. Platetek ...

May 14, 2017

By Phoenix Ring Manufaktur UG

Delivery of heat exchangers for the new gas and steam unit at the Żerań CHP Plant in Warsaw

A gas and steam unit with an electric power output of 450 MWe and thermal output of 255 MWt is currently being built at the Żerań CHP Plant in Warsaw.It is a most modern facility of this type in Poland that will use high-performance and modern gas technologies to meet the strictest European environmental criteria. Famet as a company with high engineering competence and equipped with a ...

Oct. 12, 2019

By FAMET S.A.

Kenics™Heat Exchangers are Superior to Conventional Empty Tube Heat Exchangers

Kenicsheat exchangers offer a highly efficient design consisting of streamlined Kenicsstatic mixer elements for superior performance compared to conventional straight, empty tube heat exchangers. Conventional straight, empty tube designs allow laminar build up from the process fluid on the internal tube walls which inhibits flow and diminishes the heat transfer process.Kenics heat exchangers use ...

Nov. 10, 2015

By National Oilwell Varco (NOV)

Heat exchanger blockages eliminated and acid cleaning no longer required

Kaish Foods is one of the oldest food Companies in Jordan, established in 1926. The water in Amman the capital of Jordan is hard with the impact that the shell and tube heat exchanger in the Tetra-Pak machine used become increasingly inefficient and then after 500 hours of operation would become blocked with scale and the production process would have to be stopped whilst the heat exchanger was ...

Apr. 13, 2009

By Fluid Dynamics International Ltd

Innovas Technologies LLC Awarded Competitive Grant from the National Science Foundation

Innovas Technologies has been awarded a National Science Foundation (NSF) Small Business Innovation Research (SBIR) grant for $225,000 to conduct research and development (R&D) work on developing mobile micro-sensors to identify degradation, fouling and enable remote failure detection and isolation in operating shell and tube heat exchangers. Innovas Technologies will develop a mobile, ...

Jan. 5, 2017

By Innovas Technologies LLC

Paul Ziehr Joins Energy Recovery Partners

Paul Ziehr joins Energy Recovery Partners (ERP) as a co-owner, bringing approximately 15 years of experience in VOC abatement, energy recovery and ventilation management and control. ERP serves a variety of manufacturing and processing industries, including food, automotive, print, paint, corrugated and plastics, metal coating and heavy manufacturing. “Our team will handle full-service ...

Jun. 27, 2011

By Energy Recovery Partners, LLC (ERP)

Natural gas experiences strong growth within the EU

Gasunie chooses Tranter and sets its sights on becoming the biggest gas distributor in Northern Europe Demand for gas within the EU is steadily increasing, whilst extraction levels in Europe are falling. In addition to holding around 50% of the EU's natural gas reserves, the Netherlands is also focusing heavily on becoming a gas distribution hub for Northern Europe. The company leading the way in ...

May 20, 2011

By Thomson Reuters

SialexRing solves scaling problems with plate heat exchanger and shell and tube configuration in dairy

In January of 2014, Phoenix Ring Manufaktur, at the request of PlateTek Engineering installed a 4” Sialex Optimum Ring configuration onto a Plate Heat Exchanger / Shell and tube heat exchanger hot water circuit. Typically, this combination required substantial cleaning during the annual plant “shut down” maintenance. During the operation period (approximately 10 months in each ...

Jan. 1, 2014

By Phoenix Ring Manufaktur UG

Energy Recovery Partners (ERP) Forms Alliance With Great Lakes Mechanical

Energy Recovery Partners (ERP) recently reached an agreement with Great Lakes Mechanical www.glmechanical.com to provide a more robust offering of products and environmental solutions. Teamwork between the two companies will create a streamlined approach to helping their customers implement operating cost reductions within their manufacturing plant. Together they serve a variety of manufacturing ...

Jul. 12, 2011

By Energy Recovery Partners, LLC (ERP)

Heat Exchangers Recover and Recycle Excess and Wasted Energy

In copper production, heat generated during extraction processes can be harnessed and transferred back into the system using heat exchangers, resulting in significant energy savings and unparalleled yield. “Compact heat exchangers, such as gasketed and welded plate heat exchangers, as well as spiral heat exchangers, are the most efficient technology for heat transfer,” says Roger ...

Jan. 28, 2015

By Industrial Water Cooling (IWC) Pty Ltd

VAU gets the steam up!

Delivery and installation of worldwide unique six-stage hybrid plate heat exchanger completed in record time After just 13 months production time, it’s done: Six hybrid plate heat exchangers with a total of more than 6,000 square meters of heating surface at a weight of 19 tons each were delivered with additional containers in full and on time to BENEO. Thanks to the precise and complete ...

Aug. 1, 2020

By VAU Thermotech GmbH & Co. KG

Munters Receives Double Data Center Cooling Order

Munters announced today that it received two significant orders to provide cooling solutions for two Facebook data centers in Europe. The total value of the combined orders is approximately MSEK 450 depending on the final selection of options and on-site services. Having previously supplied the first two phases of Facebook’s project in Clonee, Ireland and the first phase of their more ...

Nov. 6, 2017

By Munters

ASTM A213 / A213M - 11a standard specification for seamless ferritic and austenitic alloy-steel boiler, superheater, and heat-exchanger tubes

This specification covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes. Grades containing the letter H in their designation have requirements different from those of similar grades not containing the letter H. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different ...

Nov. 11, 2011

By ASTM International

Dates for CSP Today’s site visit to Gemasolar just announced

While some consider that there is no future for CSP in the long term, many others strongly believe that there are still plenty of opportunities for the industry, due to the uniqueness and convenience of this technology. Given the dispatchability of the CSP, clean and reliable power can be generated and distributed when needed, accommodating a larger share of variable energy sources while ...

Oct. 2, 2012

By New Energy Update

Dates for CSP Today’s site visit to Gemasolar just announced

While some consider that there is no future for CSP in the long term, many others strongly believe that there are still plenty of opportunities for the industry, due to the uniqueness and convenience of this technology. Given the dispatchability of the CSP, clean and reliable power can be generated and distributed when needed, accommodating a larger share of variable energy sources while ...

Oct. 2, 2012

By New Energy Update

There is the FAMET S.A. offer of new, innovative heat exchanger with baffles made on the basis of its own patented solution

The modern Monolith Baffle® makes possible to flow of the medium in the shell side heat exchanger along the tube bundle in longitudinal way therefore the pressure drop is minimized and heat exchange efficiency is increased in compare with heat exchangers equipped with traditional segmental baffles. Also, the tube bundle vibration are completely eliminated. Fabrication of Monolith Baffle® ...

Apr. 29, 2020

By FAMET S.A.

SWEP sweeps 2010 Frost & Sullivan Europe market share leadership award

The 2010 Frost & Sullivan Europe Market Share Leadership Award in the Brazed Plate Heat Exchanger Market is presented to SWEP. The company captured nearly 40 per cent of the European brazed plate heat exchanger market in 2009 and continues to hold the highest share by revenues. SWEP has continually focused on improving the heat transfer capability of its products. Enhanced material ...

Oct. 18, 2010

By Frost & Sullivan

NDE Technology - Heat Exchanger Inspections

During nuclear power plant heat exchanger inspections, some of the most vital tasks are the most mundane. “It’s tough for the inspection team when they’re assigned to test literally tens of thousands of tubes in a window of less than two weeks,” says Marc Brown, Principal Level III and a partner at NDE Technology in Jackson, Mich., which specializes in eddy current and ...

Nov. 23, 2020

By Zetec, Inc

ASTM B944 - 11 standard specification for copper-beryllium welded heat exchanger and condenser tube (UNS No. C17510)

1. Scope 1.1 This specification establishes the requirements for copper-beryllium alloy UNS No. C17510 welded tube in straight lengths. 1.2 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units, which are provided for information only and are not considered standard. ...

Nov. 18, 2011

By ASTM International

How Gemasolar changed the landscape for CSP

Torresol Energy’s Gemasolar tower plant represents one of the most important milestones in the history of CSP, the audience of a recent CSP Today webinar has heard. Santiago Arias remembers the reaction he got when people found out his company was looking into CSP storage at a SolarPACES conference six years ago. “Most of our competitors said we were mad to do something nobody was ...

Oct. 31, 2011

By New Energy Update

Subscribe to our eBulletins