tube heat exchanger News
-
Delivery of heat exchangers for the new gas and steam unit at the Żerań CHP Plant in Warsaw
A gas and steam unit with an electric power output of 450 MWe and thermal output of 255 MWt is currently being built at the Żerań CHP Plant in Warsaw.It is a most modern facility of this type in Poland that will use high-performance and modern gas technologies to meet the strictest European environmental criteria. Famet as a company with high engineering competence and equipped with a ...
By FAMET S.A.
-
Kenics™Heat Exchangers are Superior to Conventional Empty Tube Heat Exchangers
Kenicsheat exchangers offer a highly efficient design consisting of streamlined Kenicsstatic mixer elements for superior performance compared to conventional straight, empty tube heat exchangers. Conventional straight, empty tube designs allow laminar build up from the process fluid on the internal tube walls which inhibits flow and diminishes the heat transfer process.Kenics heat exchangers use ...
-
Innovas Technologies LLC Awarded Competitive Grant from the National Science Foundation
Innovas Technologies has been awarded a National Science Foundation (NSF) Small Business Innovation Research (SBIR) grant for $225,000 to conduct research and development (R&D) work on developing mobile micro-sensors to identify degradation, fouling and enable remote failure detection and isolation in operating shell and tube heat exchangers. Innovas Technologies will develop a mobile, ...
-
Heat exchanger blockages eliminated and acid cleaning no longer required
Kaish Foods is one of the oldest food Companies in Jordan, established in 1926. The water in Amman the capital of Jordan is hard with the impact that the shell and tube heat exchanger in the Tetra-Pak machine used become increasingly inefficient and then after 500 hours of operation would become blocked with scale and the production process would have to be stopped whilst the heat exchanger was ...
-
Paul Ziehr Joins Energy Recovery Partners
Paul Ziehr joins Energy Recovery Partners (ERP) as a co-owner, bringing approximately 15 years of experience in VOC abatement, energy recovery and ventilation management and control. ERP serves a variety of manufacturing and processing industries, including food, automotive, print, paint, corrugated and plastics, metal coating and heavy manufacturing. “Our team will handle full-service ...
-
Make your business and home better with these seamless pipes and tubes
Steel pipes and tubes seems to be a hot topic these days, in fact, buying can be proven as one of the wisest decisions taken as it can be used for several purposes and applications in industries like automobiles, boilers and pressure vessels, pharmaceutical industries, fertilizers, railways, instrumentation, diaries, condenser, defence. However, we at Anand seamless endeavor hard in offering ...
-
Natural gas experiences strong growth within the EU
Gasunie chooses Tranter and sets its sights on becoming the biggest gas distributor in Northern Europe Demand for gas within the EU is steadily increasing, whilst extraction levels in Europe are falling. In addition to holding around 50% of the EU's natural gas reserves, the Netherlands is also focusing heavily on becoming a gas distribution hub for Northern Europe. The company leading the way in ...
-
Energy Recovery Partners (ERP) Forms Alliance With Great Lakes Mechanical
Energy Recovery Partners (ERP) recently reached an agreement with Great Lakes Mechanical www.glmechanical.com to provide a more robust offering of products and environmental solutions. Teamwork between the two companies will create a streamlined approach to helping their customers implement operating cost reductions within their manufacturing plant. Together they serve a variety of manufacturing ...
-
Heat Exchangers Recover and Recycle Excess and Wasted Energy
In copper production, heat generated during extraction processes can be harnessed and transferred back into the system using heat exchangers, resulting in significant energy savings and unparalleled yield. “Compact heat exchangers, such as gasketed and welded plate heat exchangers, as well as spiral heat exchangers, are the most efficient technology for heat transfer,” says Roger ...
-
Munters Receives Double Data Center Cooling Order
Munters announced today that it received two significant orders to provide cooling solutions for two Facebook data centers in Europe. The total value of the combined orders is approximately MSEK 450 depending on the final selection of options and on-site services. Having previously supplied the first two phases of Facebook’s project in Clonee, Ireland and the first phase of their more ...
By Munters
-
VAU gets the steam up!
Delivery and installation of worldwide unique six-stage hybrid plate heat exchanger completed in record time After just 13 months production time, it’s done: Six hybrid plate heat exchangers with a total of more than 6,000 square meters of heating surface at a weight of 19 tons each were delivered with additional containers in full and on time to BENEO. Thanks to the precise and complete ...
-
Report Highlights European Biogas Potential
HRS Heat Exchangers welcomes a recent Statistical Report by the European Biogas Association (EBA) which shows that by 2050, as much as 40% of Europe’s total gas consumption could come from sustainable biomethane. We also welcome the focus that the report gives to the importance of creating sustainable uses and markets for digestate, without which such ambitions will not be realised. The ...
-
ASTM A213 / A213M - 11a standard specification for seamless ferritic and austenitic alloy-steel boiler, superheater, and heat-exchanger tubes
This specification covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes. Grades containing the letter H in their designation have requirements different from those of similar grades not containing the letter H. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different ...
-
Dates for CSP Today’s site visit to Gemasolar just announced
While some consider that there is no future for CSP in the long term, many others strongly believe that there are still plenty of opportunities for the industry, due to the uniqueness and convenience of this technology. Given the dispatchability of the CSP, clean and reliable power can be generated and distributed when needed, accommodating a larger share of variable energy sources while ...
-
Dates for CSP Today’s site visit to Gemasolar just announced
While some consider that there is no future for CSP in the long term, many others strongly believe that there are still plenty of opportunities for the industry, due to the uniqueness and convenience of this technology. Given the dispatchability of the CSP, clean and reliable power can be generated and distributed when needed, accommodating a larger share of variable energy sources while ...
-
SWEP sweeps 2010 Frost & Sullivan Europe market share leadership award
The 2010 Frost & Sullivan Europe Market Share Leadership Award in the Brazed Plate Heat Exchanger Market is presented to SWEP. The company captured nearly 40 per cent of the European brazed plate heat exchanger market in 2009 and continues to hold the highest share by revenues. SWEP has continually focused on improving the heat transfer capability of its products. Enhanced material ...
-
Want To Find an Excellent Steel Pipe Company?
Landee Steel Pipe Co. is a professional industrial pipe manufacturer and supplier in China. We are always providing our customers with best steel pipes. Because having been devoted to industrial steel pipe manufacturing with professional experience for two decades, we has stocked a wide range of steel pipes in various grades, sizes and specifications definitely meeting quality standards such as ...
-
ASTM B944 - 11 standard specification for copper-beryllium welded heat exchanger and condenser tube (UNS No. C17510)
1. Scope 1.1 This specification establishes the requirements for copper-beryllium alloy UNS No. C17510 welded tube in straight lengths. 1.2 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units, which are provided for information only and are not considered standard. ...
-
NDE Technology - Heat Exchanger Inspections
During nuclear power plant heat exchanger inspections, some of the most vital tasks are the most mundane. “It’s tough for the inspection team when they’re assigned to test literally tens of thousands of tubes in a window of less than two weeks,” says Marc Brown, Principal Level III and a partner at NDE Technology in Jackson, Mich., which specializes in eddy current and ...
By Zetec, Inc
-
Clean, thorough, efficient: 15 years of self-cleaning Activepowerclean heat exchangers
The year 2000 is not only a special year because of the new millennium: the best Olympic Games ever were held in Sydney, with the most athletes, the most types of sports, the most participating countries. The Harry Potter books won the hearts of readers around the world in the international book market and there was also good news in the industrial sector: the self-cleaning Activepowerclean heat ...
By H2O GmbH
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you