turbine design News
-
Air-Cooled Gas Turbine Design and Analysis Webinar
This webinar will describe and demonstrate the cooled gas-turbine design and analysis system, developed by SoftInWay, via the utilization of AxSTREAM, AxSTREAM NET and AxCYCLE. The software presentation walks attendees through the main steps of how to use these tools to develop a highly efficient cooled gas turbine unit in a relatively short time frame. Jan 19th, 2017 | Start Time 10:00 – ...
-
Lesignano HPP Nr. 1 Archimedean screw turbine
Lesignano HPP, N.1 Archimedean screw turbine. Hydraulic design and unit layout. ...
-
TURBINATOR - Water driven foam dispenser
The Turbinator is designed to accurately mix concentrated foam concentrate with fresh water or sea water and is suitable for use in stationary systems or in mobile units for portable use. It is available in a range of sizes and consists of two main parts; a water-powered motor and a foam pump. The motor and pump are coupled and integrated into a single compact body and both are "positive ...
By Copersa
-
Gamesa’s G97-2.0 MW turbine awarded first type certificate
The certified G97-2.0 MW turbine is the first to be equipped with Gamesa’s infused blade. This model is already being marketed in India. Gamesa, a global technology leader in wind energy, has achieved a new product strategy milestone by having its G97-2.0 MW turbine, equipped with an infused glass fibre blade, obtain the first class A type certificate issued by independent ...
-
Gamesa completes assembly of the first offshore turbine installed in Spain
This morning Gamesa completed assembly of the main parts (tower, nacelle and blades) of Spain's first prototype offshore wind turbine, which has been installed at the Arinaga Quay in Gran Canary Island. Installation of the tower, nacelle and the three blades, which were shipped from Bilbao port to the Canaries, began in the middle of April with the tower assembly work. The tower measures 90 ...
-
Gamesa continues to grow in China, having signed new agreements for the supply of 95 MW
These turbines are custom-designed to withstand the extreme winds typical of this coastal area which is often hit by typhoons. Gamesa has achieved a new product strategy milestone, namely the introduction of its new G114-2.5 MW turbine into China. Specifically, the company will supply 38 (95 MW) of these turbines to state-owned developer Zhognmin1 at two wind complexes. Nineteen of these ...
-
Gamesa to supply 304 MW at five wind farms in India
The company has been contracted install a total of 152 of its G97-2.0 MW class S and G114-2.0 MW class S turbines, custom-designed for the low wind speed sites typical of India Gamesa continues to make further inroads into the Indian market, where the company is the number-one OEM, having commanded the leadership spot for three years in a row. Specifically, Gamesa has secured five new ...
-
Gamesa reinforces its leadership in India with orders for the supply of 460 MW at seven developments
The company has been contracted to install a total of 230 of its G97-2.0 MW class S and G114-2.0 MW class S turbines, custom-designed for the low wind speed sites typical of India Gamesa continues to make solid inroads into the Indian market, reinforcing its leadership position with seven new orders1 for the supply of 460 MW in total to several customers. The company will handle the turnkey ...
-
Seminar highlights distrust in tech transfer pledges
Instead of waiting endlessly for transfer of climate change mitigation and adaptation technologies from developed countries, developing countries can resort to indigenous technologies, common technologies and stronger south-south cooperation, policy analysts have suggested. Participants at a seminar on trade and technology in energy use and climate change, held in New Delhi on 29 September, said ...
By SciDev.Net
-
Gamesa showcases its new 5 MW offshore wind turbine at the Offshore Wind 2013 trade fair
The company expects the turbine installed in Arinaga, Canary Islands, Spain, to begin operating in the third quarter of 2013 and the installation of the initial units in 2014 Gamesa, a global technology leader in wind energy, is exhibiting for the 3rd consecutive year at the Offshore Wind 2013 trade fair, one of the industry's premier events, in Manchester, UK, from 12-13 June. At this ...
-
Gamesa makes progress on its offshore strategy as it begins to erect its 5 MW turbine
The offshore turbine’s blades, nacelle and tower, set to be installed at the Arinaga Quay (Gran Canaria, Spain), are loaded onto a ship at the port of Bilbao The company expects the turbine to begin operating in the third quarter of 2013 Gamesa, a global technology leader in the wind power industry, has marked further progress on its offshore strategy by shipping components for its 5 ...
-
Gamesa to supply 65 G114-2.1 MW turbines in Brazil
Gamesa, a global technology leader in wind energy, has received a new order1 for the supply of 65 of its G114-2.1 MW turbines at the Babilonia wind complex being developed in the town of Morro do Chapéu, in Bahia state. Under the terms of the agreement, Gamesa will transport, install and commission the 65 turbines (136.5 MW). Delivery of the wind turbines is scheduled to begin at the end ...
-
Gamesa secures new order in China to install turbines at an altitude of over 3,200 metres
The company has been contracted to supply 32 MW for Concord New Energy, with whom it recently agreed another order for a project being developed at an altitude of 3,400 metres. In addition, Gamesa will deliver another 50 MW for phase three of the Senjitu II complex. Gamesa, a global technology leader in wind energy, has received two new orders1 in China for the supply of a total of 82 MW to ...
-
Gamesa awards prizes for two patents related to turbine load management and onsite validation of turbine electrical systems
Third edition of Gamesa’s Patents and Innovators competition, designed to reward employee patenting efforts Gamesa, a global technology leader in wind energy, has celebrated the third edition of its Patents and Innovators Competition, which acknowledges its employees' innovation and patenting efforts, viewed as crucial to development and protection of the company's technological ...
-
Gamesa showcases at Awea its new G114-2.5 MW wind turbine: more energy production with the lowest CoE
The new turbine, based on the 2.0 MW platform proven technology, reaches the highest efficiency and profitability in medium wind sites G114-2.5 MW produces 29% more energy than Gamesa’s G97-2.0 MW turbine while lowering the cost of energy by 10% Gamesa, a global technology leader in the wind industry, showcases its new wind turbine with 2.5 MW of unitary power: the G114-2.5 MW at the ...
-
Gamesa reinforces its manufacturing base in India with a new blade factory
This facility will make blades for the G114-2.0 MW class S turbine and marks Gamesa's second blade factory in India, where it also has a nacelle manufacturing facility The new blade factory is part of the company's plan for tapping the growth opportunity in India, where it is the number one OEM Gamesa, a global technology leader in wind energy, has achieved a fresh milestone in its growth ...
-
Integrated Process for Turbomachinery Rotor development, dynamics analysis and testing
March 2nd , 2017 | Start Time 10:00 – 11:00 AM EDT Rotor-bearing systems are the most critical components of any rotating machinery. Rotor lifetime and reliability depend, first and foremost, on the level of rotor vibrations. With this in mind, in order to meet the highest requirements of reliability, each step of the rotor development process should be based on accurate rotor dynamic ...
-
Gamesa reinforces its industrial presence in India with a new factory
The factory will produce blades for the G114-2.0 MW class S turbine, tailor-designed for the Indian market Shri N. Chandrababu Naidu, Chief Minister of Andhra Pradesh, Ramesh Kymal, Gamesa's CEO in India, and José Antonio Cortajarena, Gamesa's Chief Corporate and General Secretary, presided the inauguration ceremony Gamesa today inaugurated its new factory in the Nellore ...
-
Gamesa launches its latest turbine: the G126-2.5 MW, maximum output for less windy regions
The new G126-2.5 MW turbine allows users to maximise efficiency and profitability at low wind speed sites. The G126-2.5 MW turbine boosts energy production by up to 25% relative to the G114-2.0 MW. Today, Gamesa, a global technology leader in wind energy, unveiled its new 2.5-MW turbine, specially designed for less windy conditions, at the international trade fair China Wind Power 2015 ...
-
Gamesa to deliver its first G114-2.5 MW turbines in Sweden
Gamesa, a global technology leader in wind energy, has signed an agreement for the supply of its first G114-2.5 MW turbines. Under the terms of the agreement reached with leading international infrastructure investor and asset manager John Laing, the company will install six of this new turbine model (aggregate capacity of 15 MW) at a wind farm in Sweden. "This contract represents a milestone in ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you