SAN LUIS OBISPO, Calif., Nov. 29, 2012 /PR Newswire/ -- LightManufacturing's heliostats (sun tracking mirrors) keep reflected sunlight on a target, providing heat and light for buildings and industry without the use of fossil fuels.
The firm's H1 heliostat is marketed as the 'lowest cost per reflected watt' heliostat available, in part due to the use of a tensioned reflective membrane instead of glass.
The firm sells the H1 heliostat as a stand-alone product, and as part of solar plastic molding systems. These systems focus heat from ten or more heliostats onto a metal mold, melting plastic and making useful products like water tanks. No fossil fuels are used to heat the molds, saving money and reducing emissions.
While most of the energy used comes from the Heliostats, electricity is still needed to turn the mold and run the system's electronics. 'A typical Solar Rotational Molding system has about 500 watts of onboard PV installed,' says LightManufacturing CEO Karl von Kries, '…as compared with about 20,000 watts of energy we collect from the heliostat array.'
'We wanted to work with a strong local partner, and Power-Save has a great track record of supporting large scale PV customers, including state government and corporate projects,' continued von Kries. Additional considerations were Power-Save's strong supply chain and high quality photovoltaic modules - important considering the volatile nature of the PV market.
'We need a firm that's selling a quality product, that can meet our deliverable requirements, and wants to work with us in the long term,' says von Kries. 'When we ship a Solar Rotational Molding system, it's a complete 'factory-in-a-box', and it's likely to be installed at a remote location without a lot of local support. We need to know that the PV modules we supply along with our heliostats and solar thermal gear are going to be there for the long haul.'
LightManufacturing developed the patents-pending Solar Rotational Molding (SRM) technology in 2009, and has a full-scale molding facility in Californiamaking parts for commercial customers. The firm anticipates sale of turn-key SRM systems in Q1 2013. Von Kriesrecently presented the SRM technology to the national Association of Rotational Molders meeting in Minneapolis. The technology has been featured in Plastics News, Cleantechica, Buildings.com, and other media outlets.
Power-Save Energy is a broad-based solar and energy saving product manufacturing and distribution firm founded in 2006, with expertise in photovoltaics, solar attic fans, radiant barrier, power factor correction devices and HID lighting controllers. The firm sells to consumers, business, and government agencies, with no limit on project size or scope.
LightManufacturing's H1 heliostats are available at http://www.lightmanufacturingsystems.com/heliostats starting at $1349 USD.
Karl von Kries
855 4th St
Pismo Beach, CA 93449
This press release was issued through eReleases® Press Release Distribution. For more information, visit http://www.ereleases.com.