Syngas Cleaning Station for Gas Analysis
- Remove TAR , Dust & Water vapour
- Transportable with 3 refillable bubbler
- Inlet from process Hi-Temperature probe
- Peltier cooler with 1 heat exchanger
- Internal Sample pump
- Gas sample out dry @ 5 ⁰C
- Max Flow sample out 300 Nl/h
- Low cost of ownership
- Cooler maintenance free
- Universal uses in sampling gas
Regarding the presence of tars in biosyngas, it may be stated that “tars” are equivalent to a major economic penalty in biomass gasification. Tar aerosols and deposits lead to more frequent maintenance and repair of especially gas cleaning equipment and resultantly lower plant capacity factors.
This leads to a decrease of revenues or to higher investments, as some equipment will be installed in duplicate to overcome standstills.
Furthermore, removal of tar components from the process wastewater requires considerable investments that can even be dramatic as some tar components show poisoning behaviour in biologic wastewater treatment systems.
In gas analysis it’s mandatory to have a a clean gas to feed the analyzer so the system flow firstly remove the majority of tar and dust through washing device , then by two degree precision filter, the gas chiller provide to remove the moisture and dust, as to obtain a kind of clean dry air. Finally, the sample gas through the protection filter goes into the analytical instruments.
-
Most popular related searches
Customer comments
No comments were found for Syngas Cleaning Station for Gas Analysis. Be the first to comment!