Power Distribution Applications

Compressor stations are located at intervals of every 40-70 miles along a gas pipeline to compress the gas to a specified pressure, thereby allowing it to continue traveling along the pipeline to its destination. Compressor stations require filter separators that remove liquids, dirt, particles, and other impurities from the natural gas, and CECO offers considerable expertise at separation for gas pipeline compressor stations.

By CECO Environmental based in Dallas, TEXAS (USA).

WesTech engineers water and wastewater process solutions for the power industry including water pretreatment, cooling tower makeup water treatment, and ultrafiltration pretreatment to reverse osmosis, guaranteeing SDIs less than 3. ISO 9001:2008 certified and turnkey experienced, WesTech stands ready to meet deadlines and assure minimal downtime with focused service.

By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

Heating Elements | Coils / Cartridge Heaters / Sheath; Thermally conductive cement. Enables transmission or dissipation of heat. Secures element and maintains assembly. High temperature resistance and electrical insulation.

By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).

As the owner-operator of power generation facilities, your plants and supporting infrastructure are critical to your success. Our solutions span the entire asset lifecycle from design through construction and into operations. Coordinate capital projects and revamps, whether managed directly or through contractors, with solutions for multi-discipline design and analysis and project collaboration. You will bring new plants into production more quickly and manage revamps with confidence.

By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA).

For many years, sugar mills have burned bagasse, the fibrous byproduct of the processing of sugarcane, using special boilers that produce the steam needed to help break down the sugar cane. As the cost of powering this equipment by burning fossil fuels has steadily risen, the use of biofuel cogeneration as a source of power production has become more prevalent. Many sugar mills have updated their bagasse-fired boilers and linked them to generators that produce electricity used to power the mill’s operations...

By E Instruments International, LLC based in Langhorne, PENNSYLVANIA (USA).

Resistors | Wire Wound / “Boat” or “Bathtub” / Rheostat; Coating, potting, and/or encapsulation. Seals resistance wire placed in or upon ceramic base. Specified for electrical insulation.

By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).

The generation and distribution of electricity consists of processes such as power stations, power transmission, electricity distribution and electricity retailing. PROCO Products has an inventory of check valves and expansion joints that are suitable for power generation industries, and can handle the stresses and pressures that are a normal part of the process. PROCO operates worldwide, and maintains one of the largest product inventories in North America.

By Proco Products, Inc. based in Stockton, CALIFORNIA (USA).

Thermal power generation involves the combustion of a fuel to raise steam and drive a turbine to produce electricity. AMETEK Land provides the high-performance temperature measurements, emissions monitoring and safety systems demanded by this industry. High-accuracy measurements of temperature and flue gas composition are essential in optimising the combustion process, regardless of fuel used. Our instruments also help control pollution, and provide essential safety monitoring. With more than 60 years’...

By AMETEK Land based in Dronfield, UNITED KINGDOM.

As the owner-operator of an electric and gas transmission and distribution network, you need to plan, design, manage, and operate your utility infrastructure. Whether your focus is electric and gas distribution networks, transmission networks, or electric substations, you can benefit from Bentley’s comprehensive solutions for utilities infrastructure. We can help you meet the challenges of expanding customer expectations, increasing demand, and growing compliance requirements.

By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA).

Maintain efficiency and protection with our wide range of filters which are designed to reduce manual cleaning and maintenance of your equipment. As a leading manufacturer and knowledge of the Power generation industry, we are able to offer solutions for all your filtration needs. We supply to both SME businesses and also to the world’s largest power generation corporations with our wide range of filters. Our products have been carefully engineered to ensure complete efficiency and functional integrity.

By The Filter Company based in Nottingham, UNITED KINGDOM.

Passenger cars can now run with zero emission while not compromising convenience. Phinergy powered cars offer a similar range to gas powered cars, and they only take five minutes to reload.

By Phinergy based in Lod,, ISRAEL.

Usually, the performance of a PV module is measured at the factory under the so-called Standard Test Conditions (STC), described in IEC 60904. This is a convenient test method that can be integrated in routine production procedures. However, the indoor measurement of the STC PV performance reveals the power production of the module at only one particular measurement condition.

By EKO Instruments based in San Jose, CALIFORNIA (USA).

Our Power Pallet biomass gasifier genset, when used with the grid-tie module, can be integrated with an existing 3-phase AC microgrid that includes intermittent electrical sources such as solar panels or small wind turbines.

By All Power Labs based in Berkeley, CALIFORNIA (USA).

By Ecofix Pty Ltd. based in Sydney, AUSTRALIA.

AKASYSTEM is highly regarded for its performance and enhanced charging times. The liquid-cooled system is freely scaleable, meets stringent safety standards and has been the most economical and reliable alternative in the field of e-mobility since its conception. The speed with which these compact, thoroughly durable solutions can be charged makes them ideal for use the mobility requirements of utility vehicles.

By Akasol AG based in Darmstadt, GERMANY.

AKASYSTEM is highly regarded for its performance and enhanced charging times. The liquid-cooled system is freely scaleable, meets stringent safety standards and has been the most economical and reliable alternative in the field of e-mobility since its conception. The speed with which these compact, thoroughly durable solutions can be charged makes them ideal for use the mobility requirements of the world of rail transport.

By Akasol AG based in Darmstadt, GERMANY.

In markets with high electricity rates, such as e.g. Germany, Hawaii or Australia, it can be economical to deploy energy storage systems to store the generated photovoltaic (PV) production for usage in the evening hours. As a grid tied PCS, Eguana`s products can seamlessly charge and discharge the battery, deliver power to the grid and supply critical loads. Unlike other battery inverters, Eguana`s PCS can supply the base loads continuously from the battery system, even during peak consumption times, while...

By Eguana Technologies based in Calgary, ALBERTA (CANADA).

The Triogen ORC can be used with biomass combustion, for example sawdust, chips, bark and treated wood; and other biomasses, such as straw, rice, husks and bio-sludge, as well as other high organic-content waste. The Triogen ORC will be connected to the combustor. The Triogen ORC converts the flue gasses from the combustor into electricity.

By Tri-O-Gen B.V. based in Goor, DE, NETHERLANDS.

Each machine is equipped with its own energy source, letting production lines become more flexible and easy to configure.

By Phinergy based in Lod,, ISRAEL.

Off-Grid Systems wind & solar-powered rural electrification hubs for easy deployment in the most remote sites.

By XANT NV based in Brussels, BELGIUM.