Energy measurement applications include solar energy collection and heating systems, biogas conversion, utility usage, alternative fuel development, and many more. CAS DataLoggers provides advanced data loggers with the precision you need to accurately measure temperature, AC and DC voltage and current, gauge pressure, and more.
By CAS DataLoggers based in Chesterland, OHIO (USA).
Crude oil is a highly complex mixture of hydrocarbons. Through desalting, distillation, and conversion, it is transformed into fractions of higher-quality hydrocarbons such as paraffins, aromatics, naphthenes, and olefins. Different ratios of these so-called PIANO compounds are blended to yield different fuel and lubricant types. Increasingly, fossil fuels are blended with biofuels. Both blending and refining processes are demanding and require precise and reliable analysis. Regardless whether you deal with...
By Metrohm AG based in Herisau, SWITZERLAND.
One of the most widespread liquid electrical insulating materials is transformer oil. It is used to fill the pores in the fiber insulation and the space between the windings, thereby increasing the dielectric strength of the insulation and improving the heat removal from the windings and the core of a transformer.
By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).
Sauereisen is the most widely known international company to supply corrosion-resistant coatings, mortars and gunitable refractory linings for flue gas applications in the power industry. For more than half a century, our cost-effective corrosion-resistant materials have provided solutions for power plants and their various components where the infrastructure would otherwise be threatened by corrosion. Our diverse product line includes potassium silicate, novolac epoxy, vinyl ester and urethane formulations...
By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).
Off-Grid Systems wind & solar-powered rural electrification hubs for easy deployment in the most remote sites.
By XANT NV based in Brussels, BELGIUM.
Usually, the performance of a PV module is measured at the factory under the so-called Standard Test Conditions (STC), described in IEC 60904. This is a convenient test method that can be integrated in routine production procedures. However, the indoor measurement of the STC PV performance reveals the power production of the module at only one particular measurement condition.
By EKO Instruments based in San Jose, CALIFORNIA (USA).
The generation and distribution of electricity consists of processes such as power stations, power transmission, electricity distribution and electricity retailing. PROCO Products has an inventory of check valves and expansion joints that are suitable for power generation industries, and can handle the stresses and pressures that are a normal part of the process. PROCO operates worldwide, and maintains one of the largest product inventories in North America.
By Proco Products, Inc. based in Stockton, CALIFORNIA (USA).
PremiumIn this era of economic crises, oil crises and discussions regarding nuclear power stations, there is an increasing focus on "renewable energy sources" and the "energy industry". Not only high efficiency but also precision, durability and stability are essential factors here. Pressure transmitters and level transmitters from BD|SENSORS guarantee exactly that. Whether you are involved in conventional energy production or in the field of renewable energy sources, with BD|SENSORS you have a reliable partner to...
By BD|SENSORS GmbH based in Thierstein, GERMANY.
Despite advances in technology, large oil-filled transformers are still the major component of the electric transmission substation. Many have been in service for years. One issue with these aging transformers is oil leaks. Even slight leaks, creating stains down the sides of transformers and oil circuit breakers, need to be addressed without outage. A bio-cleaner like iSorb is an ideal solution in that it doesn’t require water, sticks to vertical surfaces, and gets into corners and other tight spaces.
By Beyond Environmental based in Geneva, ILLINOIS (USA).
The Triogen ORC can be used with biomass combustion, for example sawdust, chips, bark and treated wood; and other biomasses, such as straw, rice, husks and bio-sludge, as well as other high organic-content waste. The Triogen ORC will be connected to the combustor. The Triogen ORC converts the flue gasses from the combustor into electricity.
By Tri-O-Gen B.V. based in Goor, DE, NETHERLANDS.
Körting condensers, steam jet and water jet vacuum ejectors are established components in steam power plants. There have been innovative developments over the past decades and continously upgraded aggregates to lower energy consumption by optimising heat revovery in power stations.
By Körting Hannover AG based in Hannover, GERMANY.
Global demand for energy and infrastructures is increasing rapidly due to economic and population growth. New challenges are created by the need to fulfil the societal demand for energy and mobility, the necessity to reduce emissions and pollutants, and obligations to comply with environmental regulations. Satellite Earth observation is a highly cost-effective means for the assessment of energy demand and renewable energy potential, monitoring of infrastructure development, environmental impact assessment...
By GeoVille Information Systems GmbH based in Innsbruck, AUSTRIA.
Passenger cars can now run with zero emission while not compromising convenience. Phinergy powered cars offer a similar range to gas powered cars, and they only take five minutes to reload.
By Phinergy based in Lod, , ISRAEL.
Combining highly-experienced industry experts and a state-of-the-art research center, EVAPCO is constantly developing next generation technology for wet cooling tower systems, dry air-cooled steam condensing, and hybrid systems.
By Evapco Inc. based in Westminster, MARYLAND (USA).
Power companies face access challenges as they move heavy vehicles across wet, soft ground for maintenance of power lines and utilities. Access is often through environmentally-sensitive areas such as marshes and low-water crossings and undeveloped land with low soil strength. With the GEOWEB system, roads are built with 50% less cross section of aggregate, even allowing use of locally-available fill, to support heavy vehicles with minimal environmental impact. Whether for maintenance vehicle access at substatio...
By Presto Geosystems based in Appleton, WISCONSIN (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you