Cable Deployment Equipment For Power Distribution Available In Michigan
-
Manufactured by Contegra Inc.based in USA
The CH-SLX1 is the foremost product for securely mounting a submersible level transducer. By redesigning the CH-SLX1, we have been able to reduce the price - helping it be even more enticing for field applications. When a submersible sensor is installed, you don't want to have to inspect it to ensure it hasn't moved. The CH-SLX1c uses the 'Chinese finger trick' method to wedge the signal cable ...
-
Manufactured by Enduro Compositesbased in USA
Enduro fiberglass cable ladder is designed to withstand tough conditions. Lightweight, robust, and resistant to corrosion, benefits of fiberglass ladder tray over galvanized or stainless steel are many. These, combined with stringent quality standards and composites expertise, produce the leading cable tray for corrosive and demanding conditions. Enduro ladder tray has long history of delivering ...
-
Manufactured by EVSE LLCbased in USA
Economical but Smart Electric Car Charging Units for Workplaces and Other Parking Applications. EVSE LLC is an established innovator in the electric vehicle battery charging industry with installations including Southern California Edison’s workplace charging locations, the largest smart grid/automated demand response deployment in the world. For this application, SCE chose the 3703 ...
-
Manufactured by OMAC s.n.c.based in ITALY
Hydraulic winch fit to pull one rope in service operations such as setting-ups and adjustment of transmission lines and underground cables laying. Direct pull on the ...
-
Manufactured by Harbor Energy Solutions LLCbased in USA
Cable Bus is a power distribution system using multiple parallel conductors braced in a rigid enclosure. Each conductor is insulated and fully continuous from source to load. A standard range of cable bus systems are available from 600V to 218kV and up to 10,400 amps. However, cable bus systems are adaptable and can be constructed to suit a customer’s particular ...
-
Manufactured by Tectran Manufacturing Incbased in USA
Used to connect a second tractor/trailer where auxiliary style connectors are required. This is the same ABS cable construction as the standard "ATG" series but is fitted with plugs which have inverted (male) ground pins to prevent incorrect connections. (2) 3/8” ID SAE J1402 rubber air lines available with black or red/blue, ABS performance power line meets the performance requirements of ...
-
Manufactured by SeaQuest Systemsbased in IRELAND
We manufacture a wide range of cable winches from 500kg pull upwards. All SeaQuest Cable Winches are fitted with direct-drive motors and brushless high-specification sliprings, so when the winch is turning the signal is not ...
-
Manufactured by AP-Alternatives (APA)based in USA
Designed by installers for installers, TITAN™ is the most advanced hardware in the industry. TITAN'S innovative features allow for flexibility in the field while streamlining the install process. With the lowest part count per MW and integrated grounding and cable trays, TITAN is installers preferred choice. The 4-rail design is an excellent solution for areas with high snow loads and large ...
-
Manufactured by JASO Industrial Cranesbased in SPAIN
Our cable hoists with a two-speed lifting motor are supplied with the proven experience of thousands of pieces of equipment installed in recent ...
-
Manufactured by TRIC Tools, Inc.based in USA
The 4” Pre-Burster Assembly is used to burst the old or damaged 3” pipe while upsizing to a new 4” replacement pipe. The Pre-Burster slips over the cable, and is pulled along in front of the 4” Head Assembly. The Pre-Burster Shell (TT-HEAD-4PRE) has two of the 4” Blades (TT-HEAD-4BLD) that are retained with Flat Screws ...
-
Manufactured by MCM Engineering II, Incbased in USA
Metal-Clad Switchgear complies with ANSI C37.20.2: Metal Clad Switchgear is constructed with metal barriers between all bus assemblies. For example, the main cross bus is barriered off from the runbacks and risers. The upper and lower breakers are also isolated from each other, as are the cable pull sections. The most common application is for draw-out Vacuum Circuit Breakers used on ...
-
Manufactured by Craig Ocean Systems, Inc (COS)based in USA
EXPANDER CHASSIS, 16X24 Virtually all installations use an expander chassis to house the interface connection blocks to the control system. The standard version provides a +12VDC 5 Amp power supply, fan, power inlet and filter, and panel. Add the Ethernet modem, IO blocks, and any additional relay, switch, digital or analog expander units and your set to go. This, plus the basic MCU 500, ...
-
Manufactured by Cleereman Ind.based in USA
The Model 75 HP Hydrostatic carriage drive provides excellent carriage control and great adjustability. The drive is controlled by an electronic joystick which eliminates any hydraulic valves or hoses in the sawyer’s cab. A programmable pump control package allows the sawyer to easily set the feed rates in both directions to tune the drive for his individual preference. The hydrostatic ...
-
Manufactured by Galaxy Wire & Cablebased in USA
Galaxy is a leading supplier of commercial wire and cable and can provide various types of commercial wire or cable in a range of gauge sizes and configurations. Galaxy has low minimum order requirements and also offers engineering design ...
-
based in ITALY
The outside bend 90° with plane inversion is prepared for snap-on mounting to Female ends of straight elements. In the center of each end of the widths there is a circular salient perforated area securing the electrical ...
-
Manufactured by Galbreath LLCbased in USA
Galbreath's heavy-duty tandem axle trailers are best for use in the scrap and refuse ...
-
Manufactured by Glamox ASbased in NORWAY
TX61’s low building profile along with its slim and elegant design makes it the best solution for Zone 2/22 areas. The robust TX61 watertight LED luminaire is part of a complete range of lighting equipment designed for use in hazardous areas. TX61 is designed for Zone 2 and 22 according EN 60079. The luminaire is ideally suited for onshore and offshore oil and gas, marine environment and ...
-
Manufactured by Greenlee Textron Incbased in USA
Equipped with Bluetooth™ Communication enabled via the Greenlee Gator Eye app. Features LED display screen communicating pressure and battery levels as well as tool diagnostics with real-time tool ...
-
Manufactured by ZTT Groupbased in CHINA
ZTT is an experienced and reliable manufacturer and supplier of power cable. It forms about 4,000 kilometers of medium voltage (hereafter called MV) power cables annual output and becomes a professional company and satisfies different customers’ requirements with quickest delivery time. ...
-
Manufactured by Henan Yuantai Crane Machinery Import & Export Co., Ltdbased in CHINA
Electric cable hoists are compact lifting equipment that can be designed as a single or double speed electric wire rope hoist with lifting speeds of 0.8m/m and 8m/m, respectively. For material handling, they can be fixed on a beam or supporting structure for hoisting loads up and down or they can be fixed on double rail trolley as the lifting system of overhead cranes and gantry cranes. The fixed ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you