Cable Testing Equipment For Power Distribution
-
Manufactured by Prime Laboratoriesbased in INDIA
ECO KLEEN is versatile solvent and cleaning agent. It has high solvency power and is Non ODS (Non Ozone Depleting Substance), non carcinogenic, has low toxicity, and easy to use. It is good replacement for CTC which is banned to protect Ozone layer. We are offering green chemical which replaces carbon tetra chloride in almost all applications. This is a very bio friendly cleaner and is a carbon ...
-
Manufactured by Shenzhen Xinqiyuan Technology Co., Ltd.based in CHINA
XINQY RF cable assembly offers superior field-proven performance characteristics with low insertion loss and excellent VSWR in the market, less affected by noise or cross-talk or electromagnetic inference. Flexible RF cables are widely used in applications that require high-quality, low-loss signal transmission. Custom RF cables are provided to meet specific application requirements, including ...
-
Manufactured by NetAlly, LLCbased in USA
Network cable and link testing has never been easier with NetAlly’s LinkRunner AT. This network tester validates copper and fiber Ethernet connections in less than 10 ...
-
Manufactured by EuroSMC S.A.based in SPAIN
Massive use of digital technology and innovative design turn the Raptor system into the most portable primary test set available, at a very attractive price. The simplest Raptor configuration gathers a comprehensive set of resources and test functions in an ultra compact, remarkably portable 77-lb (35 kg) body: master unit, detachable touch-screen console, voltage and current measurement inputs, ...
-
Manufactured by CAMI Research Incbased in USA
This entry level tester provides basic continuity measurement in cables and small wire harnesses. It is suitable for cables carrying digital signals or any electronic signaling where small amounts of resistance in the cable or connections will not affect the function of equipment to which the cables are connected. The tester includes a 128-point fixture, a probe port, and electronics permitting ...
-
Manufactured by Chongqing Assen Power Equipment Co..Ltd.based in CHINA
AT-D Automatic Surface Tension Meter is designed and made as per the National Standard of People's Republic of China GB/T6541-86 (1991) 'Test Methods for Interfacial Tension of Oil against Water by the Ring ...
-
Manufactured by NTi Audio AGbased in LIECHTENSTEIN
The Minirator MR-PRO provides a full set of analog audio signals including sine wave, pink noise, white noise, delay test signal, polarity test signal, stepped sweep and continuous sine sweep. Further, a set of wav-files, useful for system optimization, is stored in the internal flash memory. Add your own personal favorites to this ...
-
based in ISRAEL
With truesinus digital technology, BAUR offers the most modern technology for generating high voltage with VLF (Very Low Frequency, 0.1 Hz). This absolutely sinus-shaped VLF-voltage enables the most conservative testing and diagnostics, which conforms to standards, of modern medium-voltage cable. Even for old cable designs, e.g., paper pulp cable , BAUR offers perfected devices for traditional DC ...
-
Manufactured by Viper Innovations Ltd,based in UNITED KINGDOM
The first platform to offer proactive monitoring, detection and location of both insulator and conductor faults on live low voltage unearthed power distribution systems. CableGuardian encompasses proven technology with extensive industrial heritage in challenging environments to provide a distributed and intelligent cable infrastructure health monitoring system for various electrical ...
-
Manufactured by Copper Mountain Technologiesbased in USA
R60 Vector Network Analyzer (cable and antenna analyzer) delivers lab grade performance in a handheld device. This patented (US Patent 9,291,657) analyzer can be connected directly to the antenna or other DUT without the need for a test cable, eliminating measurement uncertainties inherent to cables. Resulting in highly dependable performance and calibration stability. The 1-Port VNA comes with ...
-
Manufactured by Powerhvbased in CHINA
High current test systems are used to test the thermal stability of equipment and components. The test system induces a current in the test object causing it to heat up. The system can perform the heat cycle testing for power cables type test and pre-qualification test according to IEC 60840, and IEC 62067 etc. Based on pre-qualification test needs, test system is divided into two parts: test ...
-
Manufactured by Asian Contec Ltd.based in INDIA
ETL40 Van Mounted Cable Fault Locating System is the most advanced system in power cable fault detection combining the best-in-market technologies into a single fully automatic centralized setup with high reliability and multi-level safety standards. The system is capable of locating faults on low & high voltage cables and pinpointing cable faults of cables with DC voltage up to 40kV. ETL40 ...
-
Manufactured by KoCoS Messtechnik AGbased in GERMANY
High-precision test system for function tests on various types of switchgear device, including circuit breakers, disconnectors or earthing switches, regardless of the type of drive unit. The inputs and outputs are connected flexibly via a terminal strip, making the test system particularly suitable for use in development and laboratory environments as well as in production ...
-
Manufactured by AEM Precision Cable Testbased in USA
The MMVNA performs mixed-mode S-parameter measurements in single-ended or dual-ended configuration. MMVNA can be used with AEM’s VNA Manager Pro software providing wide range of configurations of testing environment and measurement result display. MMVNA can also be easily integrated with customers software via TCP/IP socket interface, or by using our commands interface. This makes MMVNA ...
-
Manufactured by KharkovEnergoPribor Ltd.based in UKRAINE
Van-based cable test and fault location system ETL-8 is used for testing cable insulation and locating cable faults using a variety of methods. Due to its compact size, ETL-8 may be installed in a minivan, yet it is a fully-featured cable test and fault location system which incorporates burn module and surge wave generator, and is capable of faults pre-location and cable insulation testing with ...
-
by EGYPTROLbased in EGYPT
The high voltage insulation hitester 3455 is made for measuring insulation resistance in high-voltage ...
-
Manufactured by Vitrek Corporationbased in USA
With color touch LCD & high speed DSP technology, the compact & rugged V7X sets the standard for price/performance ratio. Made in the USA to meet tough UL, CSA, TUV and IEC Hipot requirements – the V7X provides unbeatable speed, accuracy, user safety and reliability. Choose from six low cost models offering AC & DC Hipot to 5KV, leakage current measurement to 100 nano-amps, ...
-
Manufactured by HV Diagnostics Inc.based in USA
The TD60-MC system uses wireless Bluetooth technology and has an extremely simple test set up making field testing a breeze. Compared to other large and bulky TD systems on the market that require several connections, the TD60-MC requires very few connections and interfaces easily with the HVA60 using a multi-connector ...
-
Manufactured by Shine Industriesbased in INDIA
Pre-molded elbow boots applied for RMU connections with the function of protecting, insulating, and sealing. They are also used to reduce the clearances between phase to phase and phase to ground. Such boots have outstanding behaviors from the weathering resistance and electrical properties. They can withstand normal and surge voltages induced during the operational life of termination systems. ...
-
Manufactured by KharkovEnergoPribor Ltd.based in UKRAINE
Reflectometer RIF-9 can be used to detect, determine the type of and distance to various inhomogeneities (couplings, branching, etc.), determine the total length (including on drums and in bundles) as well as the velocity factor of balanced and unbalanced power cables and communication lines up to 120 km long. When locating cable faults, the reflectometer RIF-9 can be used standalone for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you