Circuit Breakers Equipment For Power Distribution
-
Manufactured by Shree Engineeringbased in INDIA
A distribution board (or panel board) is a component of an electricity supply system which divides an electrical power feed into other circuits, It has a key role in supplying power and protecting permanently installed equipment for building such as power and lighting facilities while providing a protective fuse or circuit breaker for each circuit, in a common ...
-
Manufactured by Claude Lyonsbased in UNITED KINGDOM
Backed by more than 100 years of experience in the field of voltage and power control, the Claude Lyons Series TS is universally recognised as the finest range of AC servo mechanical voltage stabilisers available on the market. Designed and manufactured in the U.K. for a World market, the TS range of single and three phase AC Voltage Stabilisers control the supply voltage to virtually any ...
-
Manufactured by Eneida.iobased in PORTUGAL
EWS DTVI can provide all relevant electrical parameters from the distribution network. All the inputs are sampled synchronously without gaps at 8kHz sampling rate. The refresh rate for voltage and current is half-cycle (10ms @ 50 Hz) and one second for all other parameters. Data is then aggregated and published at the configured periods. The Table below synthesises all the data that can be ...
-
Manufactured by Apollo Solar Incbased in USA
The Apollo Solar Pre-Wired Cabinets are the latest in the line of products designed to meet the exacting needs of installers. In our factory, we assemble a complete solar energy system with Charge Controllers, Inverter/Chargers along with all the proper size Circuit Breakers and external ...
-
Manufactured by Sinalda UK Limitedbased in UNITED KINGDOM
The Mini SVR Series of Single-Phase AC Automatic Voltage Stabiliser / Conditioners are designed to provide a clean and regulated power supply, thereby ensuring reliable protection against the vagaries of the utility mains ...
-
Manufactured by Littelfuse, Inc.based in USA
The SE-330 is an advanced ground-fault and neutral-grounding resistor monitoring relay that is compliant with Rule10-302 of the 2018 Canadian Electrical Code Part I (CE Code). It measures neutral current, neutral-to-ground voltage, and neutral-to-ground resistance. It provides continuous monitoring of the neutral-to-ground path to verify that the neutral-grounding resistor (NGR) is intact and ...
-
Manufactured by Alex Solarbased in SOUTH AFRICA
Installing your Generation one Solar Geyser is easy: Mount panels; Mount solar controller; Connect your Geyser Element; Connect the AC supply to the Earth Leakage; Plug solar panels into each other; Switch circuit breaker and earth leakage unit ...
-
Manufactured by CBS ArcSafe, Inc.based in USA
RRS-1 is a universal remote racking system capable of removing or inserting low- and medium-voltage draw out rotary circuit breakers while the operator remains outside the arc flash boundary. Model RRS-1 is used with circuit breakers that require a jack screw type mechanism for insertion and ...
-
Manufactured by H3 Pump Controlsbased in USA
H3Pc’s SOFT START Motor Controller is n new and innovative means to stop and start a reduced voltage motor. The SOFT START is standard with a NEMA 3R Rated Enclosure, Main Circuit Breaker, HOA, Start/By-Pass Push Button, Aux Terminals, Integral Run By-Pass, and External Mounted Class 1- Overload. Optional Feature to also include the following: Isolation Contactor for Motor Protection, ...
-
Manufactured by Schneider Electricbased in FRANCE
Easergy TH110 is a wireless sensor that enables the continuous thermal condition monitoring of all the critical connections made on the field, such as: cables, withdrawable Circuit Breakers (CB) and busbar ...
-
based in CANADA
The Conext™ MPPT 80 600 solar charge controller offers an industry-first set of integration features and top performance that allows for large PV array systems to be easily installed and connected to the battery bank at the lowest overall cost. Installing one MPPT 80 600 is faster than installing multiple smaller charge controllers and lowers overall costs further by utilizing fewer PV ...
-
Manufactured by AMPHYDRObased in USA
The most common method of voltage control for a hydro or wind based generating system is with a voltage sensing diversion controller. When the battery and loads are satisfied, any surplus energy must be diverted to a diversion load. Heating elements make the most reliable loads but other types of loads such as lighting can also be used. Some inverters and other charge controllers have auxiliary ...
-
Manufactured by BSLBATT BATTERY CO., LTDbased in CHINA
HI/B-LFP48-Home is a Hybrid Solar Inverter 5kW system. The modified series is a new type of hybrid solar energy storage inverter control integrated machine that integrates solar energy storage & mains charging energy storage and AC sine wave output. DSP control, through advanced control algorithm, has the characteristics of high response speed, high reliability and high industrialization ...
-
Manufactured by Champion Power Equipmentbased in USA
The Champion Power Equipment 200915 1200-Watt Multi-Purpose Portable Generator is designed with your safety and convenience in mind, and is the perfect “what if” generator. At 1500 starting watts and 1200 running watts, this rugged generator with its durable steel frame is easy to transport and provides just what you need for RV use, camping, tailgating, boating, hunting, weekend ...
-
Manufactured by ACUPWRbased in USA
When you are ready to travel, you shouldn’t have to worry about unreliable international power converters. With ACUPWR’s high-quality step-up transformer, you can get the 220–240 volts of power your devices need in the U.S., Canada, and more. There are plenty of other voltage transformers on the market, but there are none like ACUPWR — all our devices are not only built ...
-
Manufactured by Supera Anesthesiabased in USA
Keep your facility waste gas-free, and keep yourself, your staff, and your animal subjects safe with this completely OSHA-compliant unit. Even better, the EVC3100 removes waste gas and handles liquid aspiration in a single convenient, compact machine. Manufactured with the highest quality American-made pump, the EVC3100 is built to work with industry-standard WAGD wall or ceiling outlets and ...
-
Manufactured by GELEC Energybased in FRANCE
PRP: Prime Rated Power: 23 kVA / 18 kW. ESP: Emergency Standby Power: 25 kVA / 20 kW. Voltage: 230-400V. Power factor: 0.8 (cosΦ). Rotation speed: 1500 rpm. Number of phases: 1 or 3. Frequency: 50 Hz. Fuel tank autonomy at 75%: 15 ...
-
Manufactured by Blue Sea Systemsbased in USA
Four stage, three output, dry mount design, for use in harsh environments: Rugged, finned aluminum case, PreFloat™ stage prevents over charging, Power factor corrected for efficient use of AC, Intuitive diagnostic screens, User defined charge profiles and customizable settings, Provides charging for up to three battery banks, Large, bright display, Multi-language: English, French, German, ...
-
Manufactured by MCM Engineering II, Incbased in USA
Metal-Clad Switchgear complies with ANSI C37.20.2: Metal Clad Switchgear is constructed with metal barriers between all bus assemblies. For example, the main cross bus is barriered off from the runbacks and risers. The upper and lower breakers are also isolated from each other, as are the cable pull sections. The most common application is for draw-out Vacuum Circuit Breakers used on ...
-
based in INDIA
The patented CPC 100 primary injection test system replaces several individual testing devices. This reduces the costs for training and transport, and cuts down testing time. Therefore, the CPC 100 is the ideal test set for substation asset commissioning and maintenance. You can operate the CPC 100 via the integrated front panel, or by using the Primary Test ManagerTM (PTM) software on your ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you