Distributed Energy Equipment For Power Distribution In Texas
-
Manufactured by M&I Electric, LLC, part of the Myers Power Products Groupbased in USA
Metal clad switchgear can be manufactured through 4,000A utilizing EATON, ABB, GE, Siemens, and Toshiba circuit breakers. State of the art microprocessor based protective devices can be incorporated into the design to provide maximum system protection and ...
-
Manufactured by AZZ Inc.based in USA
AZZ's RuggedSpec Power Distribution Centers are factory fabricated, controlled environment, electrical buildings designed to house power distribution, metering and control equipment, ...
-
Manufactured by Advanced Electrical and Motor Controls, Inc. A Group CBS Companybased in USA
CBS MaxiVac’s new Tough Duty line of roll-in replacement circuit breakers replaces aging Power/Vac breakers without any modifications to existing cells or switchgear. The Tough Duty breakers are tested per ANSI/IEEE certification standards, are available in all standard ratings, and include the newest replacement encapsulated pole assemblies from Vacuum Interrupters, Inc. Encapsulated poles ...
-
Manufactured by M&I Electric, LLC, part of the Myers Power Products Groupbased in USA
M&I Electric’s IntelliSafe™ arc- resistant medium voltage switchgear is designed with the vision that “safety is not optional”. Our improved arc-resistant design provides industry-leading, patent-pending safety features including a simple but rugged door design, door to breaker position interlocks, automated electrical racking, and intelligence built in to help prevent ...
-
Manufactured by Benning Power Electronics, Inc.based in USA
TEBECHOP SE rectifier systems and DC converters with modular technology, scalable, robust and cost-effective, well-suited to deal with industrial requirement. ...
-
Manufactured by Sentient Energy, Inc.based in USA
The Sentient Energy ZM1 is an intelligent overhead line sensor with substation-class measurement, computing and processing capabilities. The ZM1 is battery-powered and can be deployed on power lines with lower current such as overhead low-load feeders, lateral lines, feeder tie points and rural distribution circuits. The ZM1 is an element of Sentient Energy’s Grid Analytics System™??? ...
-
Manufactured by Larson Electronics LLCbased in USA
The Larson Electronics MGS-3X480.60A-150K-3X208.60A-12X120 heavy duty 3-phase power distribution substation gives operators the ability to plug in three 60-amp 480V devices into the primary panel. On the secondary side, operators can plug in twelve 20-amp 120V devices and three 60-amp 208V ...
-
Manufactured by Dover Fueling Solutions (DFS)based in USA
Robust Output for High-Powered Charging: Our high-powered EV charging system uses dual power distribution to deliver up to 180kW of energy to one EV post or share it simultaneously to two posts in power stacks of 90kW. The Wayne Power UX EV charger provides your customers with reliable DC fast charging that can deliver up to 100km of driving from less than 10 minutes of charging - allowing them ...
-
Manufactured by Dover Fueling Solutions (DFS)based in USA
Robust Output for High-Powered Charging: Our high-powered EV charging system uses dual power distribution to deliver up to 180kW ot energy to one EV post or share It simultaneously to two posts m power stacks ot 90kW. The Tokheim Power UX EV charger provides your customers with reliable DC fast charging that can deliver up to 100km ot driving from less than 10 minutes of charging - allowing them ...
-
Manufactured by Maddox Industrial Transformer, Llc.based in USA
Unit substation dry-type transformers are designed for medium voltage power distribution where liquid-cooling is not an option, such as indoor power distribution line-ups, or outdoor areas with environmental ...
-
Manufactured by Advanced Electrical and Motor Controls, Inc. A Group CBS Companybased in USA
Our advanced heat trace panel boards can be fabricated to meet standard or custom design solutions for specific engineering requirements. We offer a single source solution for made-to-order heat trace control panel boards, from design, assembly, full quality acceptance testing, and UL-508A ...
-
Manufactured by Carter Wind Energybased in USA
The Model 500 is an efficient and powerful turbine specifically designed and optimized for low to medium wind sites, without comprising the robust design features required for installation in the most harsh tropical and artic conditions. It is based on the proven and reliable Model 300 turbine, and retains the easy shipping, self-erecting, portable attributes required for low-cost distributed ...
-
by Gridironbased in USA
The PowerPlant H24 is a micro-Combined Heat and Power (mCHP) unit that runs on natural gas, renewable natural gas, or propane. It produces energy locally and puts you in control of your power generation. The PowerPlant H24 is more efficient than the grid because it simultaneously runs heating systems (space and water), eliminates the waste that occurs through transmission and ...
-
Manufactured by Minuteman Power Technologies, by Para Systems, Incbased in USA
Minuteman Power Distribution Units offer 6-24 outlets, lengthy power cords, versatile configuration options, and premium features at a lower ...
-
Manufactured by Rittal Corporationbased in USA
Board with integral busbars. Shock-hazard-protected busbar board for the safe accommodation and contacting of components, thanks to plug-in mounting. For snap-on mounting onto 35 x 7.5/15 mm busbars or for direct attachment to the mounting ...
-
based in USA
Team Permanent Warming Systems are engineered systems designed to match component temperatures to internal process temperatures. An application may require control of stand-by temperatures, heat-up rates or cool-down rates. Team’s experienced electrical, mechanical, metallurgical and structural engineers work with you to develop custom designed Permanent Warming Systems to meet all your ...
-
Manufactured by Maddox Industrial Transformer, Llc.based in USA
These heavy duty transformers are ideal for substation yards and power distribution line-ups. ...
-
based in USA
Automatic transfer between two power sources. Output: Camlock or Lug. Input: ...
-
Manufactured by Sentient Energy, Inc.based in USA
Sentient Energy’s MM3 is an intelligent overhead power line sensor and faulted circuit indicator with substation-class measurement, computing and processing capabilities. The MM3 is a powerful wireless line sensor designed to be a platform for a set of applications. The MM3 is a foundational element of Sentient Energy’s Grid Analytics System™ which consists of the MM3 and ...
-
Manufactured by Elgin Separation Solutionsbased in USA
Elgin Water Solutions builds modular distribution and power factor correction equipment to accelerate a project and improve its bottom ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you