Distributed Energy Equipment For Power Distribution
-
Manufactured by FILCAR S.p.A.based in ITALY
Multi-service portal for the distribution of energy and to house up to 9 fluid reels, equipped with a drip tray and a panel for the service passage. it can be fully integrated with technical cabinets and with hose reels to extract the darwin model exhaust gas. specific configurations are available on ...
-
Manufactured by Power Partners, Inc.based in USA
Power Partners’ single-phase, oil-filled, pole-mounted distribution transformers are designed for servicing residential overhead distribution loads. They are also suitable for light commercial loads, industrial lighting and diversified power applications. These transformers are designed for the application conditions normally encountered on electric utility power distribution systems. Types ...
-
Manufactured by LOVATO S.p.Abased in ITALY
CP 60 is a compensation chamber which renders connected independent hydraulic circuits. It is usually installed when the primary circuit circulator interacts with one or more of the secondary circuit circulators in the same ...
-
Manufactured by Shandong BOS Energy Technology Co., Ltdbased in CHINA
Wind off-grid power system consists of the wind turbine, controller, battery, wind off grid inverter and distribution system.Wind generate AC power through the wind turbine generator driven by the wind, and then converted to be DC power. The wind turbine off grid inverter will inverte the DC power to be the right voltage , frequency and pure sine wave AC power to the local load. When the wind ...
-
Manufactured by VFP, Incbased in USA
VFP concrete shelters are constructed of reinforced panels, welded together for maximum structural strength. Joints are double-sealed with proprietary interlocking double keyway and step joint designs for superior weather protection. This construction is inherently bullet resistant to UL-752 level 4 (30-06 at 15 feet), has a 2-hour fire rating, and provides a high level of vandal protection. The ...
-
by IRISS, Inc.based in USA
The CAP-ENV-DC features a reinforced, environmentally-sealed, slide-down door design, while also protecting the largest visuallyclear infrared (IR) transmissive viewing area available on the market today. The exclusive reinforced-polymer system allows any thermography camera to monitor completely undisturbed assets inside energized electrical equipment on the visual, UV and shortwave, midwave and ...
-
Manufactured by Endcape Ltdbased in UNITED KINGDOM
When purchasing a backup generator, reliability is the key factor. Endcape’s range of prime and standby open sets have been designed for backup generator applications. Built to the highest specifications, an Endcape generator gives you the peace of mind that they will perform when you need ...
-
Manufactured by Nenghui Energy Technology Co., Ltdbased in CHINA
Solar power plant is core of development of Nenghui Technology, dedicated to provide one-stop service of solar power consulting, designing, research, production, installation, operation and maintenance. During its growth, as a qualified EPC contractor, Nenghui has built over 200 solar power plants for businesses and agriculture. Now it has become one of national solar power plant EPC in China for ...
-
Manufactured by M&I Electric, LLC, part of the Myers Power Products Groupbased in USA
Growing emphasis on the reliability of electrical power systems for energy and other industrial operations has resulted in increased demand for both low and medium voltage metal enclosed bus duct. M&I Electric type LX (low voltage) and type MX (medium voltage) bus duct provides a solution to this demand. M&I type LX and MX bus duct can be supplied in a wide range of ratings, arrangements, ...
-
Manufactured by Martin Energy Group Services LLCbased in USA
Our complete line-up of switchgear and controls ranges from single-generator through multiple-generator applications. The switch gear can be configured to work with any type of power plant, including stand-by power, prime power, distributed generation, peak shaving, island mode, and utility paralleling. These systems are fully automatic and can also be implemented with PLC and SCADA control ...
-
Manufactured by Cyber Power Systems (USA), Inc.based in USA
The CyberPower PDU15M2F8R, a 10-outlet (2 front, 8 rear), rackmount metered power distribution unit (PDU), provides 100 – 125 V 15A output. It distributes power to 10 NEMA 5-15R receptacles from a single NEMA 5-15P input with unfiltered electrical pass-through. The current draw for connected equipment is displayed in amps on the front LCD for real-time load monitoring. Designed for ...
-
Manufactured by Shaanxi Changling Photovoltaic Electric Co., Ltdbased in CHINA
Solar Street Lighting System is a set of separate and decentralized power supply system composing a solar lighting system. It is not subject to geographical restrictions and the location of electrical installation. It does not require excavation of streets for burying pipes and power transmission and transformation systems, and the site construction and installation is very easy. It does not ...
-
Manufactured by Shine Industriesbased in INDIA
Bus-bar Connectors are widely applicable for the combined connection of Ring Main Units (RMU) & Gas Insulated Switchgear (GIS) mainly by the T-joint & CrossConnector, to supply more branches for expansion, which electrically insulate and mechanically seal the connecting bus-bar and ...
-
by IEEMAbased in INDIA
Insulators are used in power transmission overhead lines to provide mechanical support and electrical isolation. They are classified on the basis of material as well as voltage levels. There are broadly three types of insulators on the basis of dielectric material – Ceramic/Porcelain insulators, Composite/ Polymer insulators and Glass insulators. As the voltage level increases the size ...
-
Distributed by Spark Energy srlbased in ITALY
Since ever Spark Energy has been researching and developing innovative products for energy production; in particular, the microSpark line comes from years of testing at the testing room, and it is designed to meet the increasing demand of distributed ...
-
based in GERMANY
The power distribution system SVS14-10 optimises DC 24 V distribution on the field level in automated process control, industrial production and chemical plants. The system holds an integral ammeter (display 25 A) for the total current and offers ten ways for electronic and thermal-magnetic circuit breakers including group signalling. It allows protection of transformers, actuators, solenoids, ...
-
Manufactured by Thomson Power Systems member of Regal Beloit Corporationbased in CANADA
UL 1008/ CSA 178 Certified, 100-800 AMP Single & 3 Phase 240V Max. Rugged, economical solution for the harsh environments of the agricultural industry. Available from 100 amp - 800 amp single and 3 phase 240 volt. Options include Service Entrance rated and Load Distribution. Easy to use TSC 80 ATS controller requires no software programming. UL 1008 ...
-
Manufactured by Resen Wavesbased in DENMARK
The Smart Power Buoy is built as a floating mechanical device utilizing the wave movement to activate a generator and produce electric power via the sophisticated carbon spring technology which turns the center drum back and forth with the wave action. When our buoy is operating in 0 to 1.5m waves the power grows rapidly then is constant after that, even in 6m waves. This prevents overloading ...
-
Manufactured by M&I Electric, LLC, part of the Myers Power Products Groupbased in USA
Low voltage metal enclosed switchgear is available through 690VAC, incorporating ABB, Cutler Hammer, GE, Siemens, or Merlin Gerin circuit ...
-
Manufactured by APS Industrialbased in AUSTRALIA
APS Industrial are proud to release the first range in what will become a complete family of ‘DB’ distribution boards that are custom designed for the demands of Australian industry and feature world-class technology and innovation. As part of this initial release, the ‘DB Ultimate’ range of competitively priced distribution boards are exclusive to APS Industrial, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you