Distributed Power Equipment For Power Distribution In Africa
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Clarke Energy is a KOHLER company and distributes KOHLER generators in the South Pacific which are suitable for a wide range of applications. Our generators are designed and manufactured in the KOHLER facility in France with more than 50 years of product optimisation experience, available with a “plug-and-play” design philosophy for ease of installation. Dedicated KOHLER service and ...
-
Manufactured by Elecnorbased in SPAIN
Elecnor is a leader, both domestically and abroad, in the distribution network, power transport line and transformation substation industry. As a benchmark company for the leading domestic electricity operators, it has managed to steadily and progressively increase its market share. ...
-
Manufactured by S:FLEX GmbHbased in GERMANY
The advantages of the S:FLEX Delta Concrete: The Delta Concrete is designed to be used on concrete foundations with effective screw fastening. Lightweight, material-efficient design makes the. Delta Concrete a modular and flexible system with few components. Almost all framed and frameless module types with common dimensions – especially bifacial modules – can be installed either in ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas is further distributed at the flare tip through AEREON's proprietary Starfire burner, optimizing gas and air mixing. ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Demand for distributed power is growing at a fast pace. Distributed Power solutions furnish power right where you are, with fewer channelling and distribution losses. The 616 Genset goes where you need it – on or off the grid, in remote locations, and even under the most demanding operating conditions, providing you with reliable power at lower fuel cost, extended equipment life and smaller ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Battery energy storage systems (BESS) play an essential role in integrating and accelerating renewable energy deployment. By helping to balance energy supply with demand, Energy storage greatly improves the efficiency of renewable sources and allow maximal renewable energy penetration into the energy network. Energy storage can provide support services to the electricity grid, or to an individual ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The MeteoPV is a purpose-built photovoltaic (PV) resource data platform, ideal for distributed PV monitoring and functioning as a plane-of-array (POA), albedo, and soiling secondary weather station. As an easy-to-use sunstation solution, the MeteoPV has the flexibility to communicate with smart pyranometers, reference cells, back-of-module temperature sensors, and compact weather ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Cogeneration (cogen) through combined heat and power (CHP) is the simultaneous production of electricity with the recovery and utilisation heat. Cogeneration is a highly efficient form of energy conversion and it can achieve primary energy savings of approximately 40% by compared to the separate purchase of electricity from the national electricity grid and a gas boiler for onsite heating. ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
In those areas not serviced by a main electricity grid, locally generated electricity is ideally suited as a cost-effective way of meeting the local electricity demand while reducing significant network installation or upgrade costs. Through supply of energy directly at the load with a captive power plant, it is also possible to reduce or avoid altogether the transport and distribution losses. ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Syngas, also known as synthesis gas, synthetic gas or producer gas, can be produced from a variety of different materials that contain carbon. These can include biomass (wood gas), plastics, coal, municipal waste or similar materials. Historically town gas was used to provide a gas supply to many residences in Europe and other industrialised countries in the 20th Century. Gas engines utilising ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Cyclone Series Air-assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to eventually combine with the process gas, which passes through its own secondary riser and is distributed at the flare tip through a proprietary AEREON Starfire burner tip. Upon mixing at the flare ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Gas engines are well suited to acting in island mode operation as a captive power plant. Island mode operation relates to those power plants that operate in isolation from the national or local electricity distribution ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a fuel for a generator is an excellent way of reducing carbon dioxide ...
-
Manufactured by Metalogalva - Irmaos Silvas, SAbased in PORTUGAL
The power sector is generally divided into the activities of generation, transmission and distribution. The Metalogalva produces the metal structures for power lines. In Portugal, has been the principal supplier of EDP (Electricidade de Portugal) operators (ordinary regime and the national grid) and REN (national electrical ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium (I.e. For burning of lighter gases). Utility flares therefore, do not require auxiliary gas streams or assist air; two mediums normally used to ...
-
by EGYPTROLbased in EGYPT
The HIOKI DC SIGNAL SOURCE SS7012 can be used not only for instrumentation system (4-20 mA) maintenance, but also for maintaining and servicing thermostatic devices, distributors, and industrial meters, as well as for evaluating electronic circuits and devices, and for production facility ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
A captive power plant is a facility that is dedicated to providing a localised source of power to an energy user. These are typically industrial facilities or large offices. The plants may operate in grid parallel mode with the ability to export surplus power to the local electricity distribution network. Alternatively they may have the ability to operate in island mode; i.e. independently of the ...
-
by juwi AGbased in GERMANY
Approved microgrid controller from Siemens as a technical base for the juwi Hybrid IQ microgrid solution. A new technological partnership between Siemens and juwi supports the mining industry regarding their energy supply: The objective is the collaborative introduction and further development of a modern control system for microgrids that enables a smooth integration of electricity from ...
-
Manufactured by IMEON Energybased in FRANCE
X-Trem ESS is an all-in-one system for outdoor installation. It is perfectly adapted to extreme climatic conditions and integrates, in one single cabinet, all the components required for the optimal operation of a solar energy system. With output powers from 3 kW to 60 kW and parallel operation feature, IMEON X-Trem ESS can be used for electrifying small and large isolated sites as well as ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you