electrical insulation Articles

  • Definition and Properties of Microcrystalline Wax

    Microcrystalline wax is amorphous solid wax, also known as purified ground wax. It is prepared from vacuum residue by solvent deasphalting, solvent dewaxing, deoiling, refining, shaping, and packaging. Its chemical composition is less than normal alkanes. The main components are cyclic hydrocarbons with normal or isomeric alkyl side chains, especially naphthenic hydrocarbons. The larger the ...

  • High Voltage Electrical Product Mould

    High Voltage Electrical Product Mould Features Mainly for pressure molding, the cavity pressure should be considered as small as possible when designing the parting surface. The exhaust should be smooth, the position of the discharge, the shape, and the flow of the material should be fully considered, especially for some small ribs. For the movable exhaust, there must be a overflow trough. ...

  • Slot Button Type Silicone Rubber Busbar Joint Box

    The electrical junction box with busbar is a new type bus bar insulation cover, it is fabricated with high-quality raw materials in our state-of-the-art manufacturing unit. Silicone rubber ...

  • RTV High Voltage Insulator Coating

    Anti-pollution Flashover Coating (rtv insulator coating) High Voltage Insulator Coatings (HVIC)   To prevent the electrical equipment from pollution flashover in humid climate; Free of surface maintenance and cleaning after coated. Features of RTV High Voltage Insulator Coating: 1. ...

  • Multifunctional Insulator Cleaning Agent RS-10

    Multifunctional Insulator Cleaning Agent (RS-10) is mainly used for eradicating dirt, dust and contaminations on surface of the power equipment, especially clean that which surface was heavily polluted. After cleaning, RS-10 can significantly enhance the adhesion between the RTV coatings and the surface of insulator. The Advantages of Multifunctional Insulator Cleaning Agent RS-10:Remove ...

  • Line Post Insulator

    We can offer different Voltage of Line Post Insulator for Transmission Line. Such as Long Rod Insulator, Rod Insulator and Pin Type Insulator.   Contact us get more details about Line Post Insulator, such as TDS, Application Method, OEM etc.   We can supply different type of Line Post Insulator, also customer required.   Line post insulator is an industrial ...

  • Insulator & Electric Series

    We offer different kinds of Station Post Insulator for Substation, Line Post Insulator, Disc Suspension Insulator, Hollow & Bushing Insulator, Composite Insulators etc.such as Circuit Breaker (CB), Post Insulator, Disconnector, Potential Transformer (PT), Surge Arrester, etc. Contact us get more details about Station Post Insulator, such as TDS, Application Method, OEM ...

  • Hollow & Bushing Insulator

    We offer different kinds of Hollow & Bushing Insulator for Substation, such as Circuit Breaker (CB), GIS, Post Insulator, Disconnector, Potential Transformer (PT), Surge Arrester, etc. Contact us get more details about Hollow & Bushing Insulator, such as TDS, Application Method, OEM etc.We can supply different type of Hollow & Bushing Insulator, also customer ...

  • High Voltage Insulator Coating Series

    High Voltage Insulator Coating (HVIC) is used on excessive voltage insulators to forestall flashover and arcing, particular in severely contaminated environments. Following the following 2 tips, you will get good results: Clean all surfaces of dust, grease and wax & Check temperature and humidity when applying. ...

  • Enhanced Anti-pollution Flashover Coating RTV-II

    A functional insulator coating to protect insulators in pollution area, such as industrial area, coastal area and other extreme environmental conditions, also can be used in normal environmental conditions. RTV-II/ PRTV is a one part and new type Room Temperature Vulcanizing  ...

  • Composite Insulator

    We offer different kinds of composite insulator for substation. Contact us get more details about composite insulator, such as TDS, Application Method, OEM etc.We can supply different type of composite silicone insulator, also customer required. Composite insulator  ...

  • Busbar Insulation Coating

    The silicone rubber insulation coating is made from special silicone rubber, high-performance material and other polymers by polymer blending technology. Its basic structural unit is silicon - oxygen chain while its side chain is connected by silicone with another organic radical group. Therefore, this structure makes the coating well combine the properties of both organic and inorganic compound. ...

  • Anti-Algae & Anti-Fouling Coating

    Leveraging upon our experience, we have become a prominent Anti-Algae & Anti-Fouling Coatings (RTV-ZB) Manufacturer, Exporter and Supplier in China and rest of the world. Applicable for flash-over & algae prevention, our well-formulated anti algae coating and anti fouling coating are acknowledged for offering lasting sterilization and inhibition for mold, bacteria, yeast and other ...

  • What Does Silicone Mean

    What Does Silicone Mean Silicon is a very rich element on the earth, and silicone is the product after the organic silicon is organized. Silicone, also known as silicone or siloxane, is a siloxane organic polymer that is cross-linked by silicon oxide. It has excellent properties not found in general organic polymers such as cold, heat, ...

  • Case Study: Kingspan Insulated Panels

    Kingspan Insulated Panels have ambitious goals when it comes to sustainability and the environment.  By 2020 Kingspan aims have their global portfolio of buildings, including over 100 sales & manufacturing offices in over 40 different countries, operating at net zero – where a building produces as much power as it consumes.  In order to achieve this goal, Kingspan has been ...


    By Legend Power Systems Inc.

  • Transformer Oil Hydrotreating case study

    Hydrogenation of waste transformer oil (electrical insulating oils) can produce an oil product that is far better in quality and yield in comparison with fixed bed clay adsorption or reaction with sodium metal. This is proven at Sequoia- client’s facility in Midwestern USA. The 5 million gallon/year throughput naphthenic oil hydrotreater produces oil free of PCBs (polychlorobiphenyls ...


    By Sequoia Global, Inc.

  • Correlation of dielectric model parameters with experimental results based on PDC, RV and loss factor measurements for high voltage capacitors

    To improve the reliability and quality of electric power systems, preventive diagnosis and regular maintenance of high voltage capacitors are required. Dielectric response measurements in both time domain and frequency domain are potential tools for assessing the condition of dielectric of high voltage capacitors. Modern measurements in time domain include polarisation and depolarisation current ...


    By Inderscience Publishers

  • Thermodynamic analysis of a pyroprocessing unit of a cement plant: a case study

    The cement industry is one of the most intensive energy and cost industries in the world that consumes about 3800 MJ per tonne of cement produced. To achieve an effective energy management scheme, energy and exergy analyses were employed on the pyroprocessing unit of Gaziantep Cement Plant in Turkey. Energy and exergy efficiencies are determined to be 52.2% and 35.9%, respectively. Application of ...


    By Inderscience Publishers

  • Fault characteristics in electrical equipment

    Proper design and installation of electrical equipment minimizes the chance of electrical faults. Faults occur when the insulation system is compromised and current is allowed to flow through an unintentional path. IEEE Std 493 Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems1 publishes data that reports that the vast majority of faults are classified as ...


    By Eaton Corporation

  • Water vapour permeation measurement for PV Solar Cell packaging

    With fears of carbon dioxide causing global warming and diminishing supplies of fossil fuels, a looming energy crisis is affecting all countries.  As a consequence, a great deal of world-wide effort is going into the development of alternative energy technologies.  At present, wind, hydro and geothermal are becoming well established with more niche roles for tidal and solar. The latter ...


    By Systech Instruments Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you