Electrical Insulation Equipment For Power Distribution
-
PremiumDistributed by Fluorostorebased in USA
These FEP straight lengths come in 6-foot sizes and possess the same properties as standard FEP. They are a great choice as an electrical insulator in high voltage equipment, sight glass tubes, or machined to short lengths for mechanical ...
-
Manufactured by Shine Industriesbased in INDIA
Heat Shrinkable Sleeves provide insulation enhancement to bus-bar systems up to 36kv and protect them against flash-over and accidental induced discharge. The use of bus-bar tubing allows equipment designers the freedom to reduce air spacing between busbar, such as in manufacture of switchgear cabinets where space is at a ...
-
Manufactured by Sanergridbased in FRANCE
Allows control of a large number of high voltage insulators in the substation: power transformers, bushings, circuit breakers, disconnectors, current transformers, voltage transformers ... in porcelain, glass or ...
-
Manufactured by Shenzhen Union Tenda Technology Co., Ltd.based in CHINA
The material is heat reinforced polymer, designed to meet the Thermal conductivity and reliability demand for the thermal conductivity of high application terminal. ...
-
by neoxid GmbHbased in GERMANY
To test the electrical insulation effect, the breakdown voltage can be measured similar to DIN EN ISO 2376. Flat and almost flat surfaces can be measured. Near edges or sharp-edged angle transitions the measurement is not permitted. The test is - if measured to the point of sparking - destructive. In modified form with "wet" contacting, the finest cracks can be detected in insulating layers. ...
-
Manufactured by Allis Electric Co., Ltd.based in TAIWAN
For the demand of safety for the power distribution equipments, dry type transformer with fire resistant, non-polluting and humidity resistant features are often the right choice. AEC's cast resin transformer provides the best and safest service to all kinds of power distribution system ...
-
Manufactured by ZTT Groupbased in CHINA
ZTT is an experienced and reliable manufacturer and supplier of insulators for overhead transmission line, substation, distribution line (rural), railway. ZTT has about 350,000km successful operation performance now. It forms about 1,000,000 sets (appr 5,000 tons) of composite insulators annual output and becomes a professional company and satisfies different customers’ requirements with ...
-
Manufactured by Advanced Ceramic Materials (ACM)based in USA
Alumina, or aluminum oxide, with a molecular weight of 102, is the major source of aluminum in nature. Alumina has very high melting point, which is 2,072 °C and it is extremely hard. Alumina ceramic is the most common technical ceramic material and a relatively traditional material. High purity alumina ceramics as a fine ceramic material is widely used in a lot of ...
-
Manufactured by Romind T & Gbased in ROMANIA
Insulating sleeves are protective equipment used during works on LV electrical panels (Un ≤ 1 kV). Insulating sleeves are recommended for the electrical insulation of live sockets and High Rupturing Capacity (HRC) fuses in electrical panels, in order to avoid the accidental contact with the installation in the proximity of the work area. Insulating sleeves are made of red-tinted transparent ...
-
Manufactured by Rise Technology srlbased in ITALY
Automatic Laminator that allows to store in its memory various production cycles, through a PLC. Lamination 4500x1300mm modules, using Standard or Fast type EVA. The laminated modules are comply to 503JRC specifications (exposition cycles: Thermal, humidity, freeze, thaw, mechanical load, torsion, pressure or single point impact and electrical insulation). Touch-Screen panel, which allows to ...
-
Manufactured by Allied Environmental Technologies, Inc.based in USA
The need for the ultimate Waste Destruction offered by plasma discharge technology is evident from population growth in all nations, deterioration of water supplies, increased production of toxic wastes and infectious hospital wastes, and the diminishing amount of land that can be used for municipal solid waste dumps. Because of these increasing volumes of all types of wastes and the increased ...
-
Manufactured by Mira Enterprisesbased in INDIA
Pipe Insulator is kind of a Transmission line, that is manufactured by Mira Enterprises, and is used commercially in the Electrical industry (Esp Spares). It can handle voltage ranging up Upto 90 to 150Kv and has a cylindrical shape. Contact Mira Enterprises to order these great products for your unit at a bulk rate. Our products are made using high-quality alumina ceramic. We are a manufacturer ...
-
Manufactured by Romind T & Gbased in ROMANIA
Modular insulating sticks (PMU or PMP) consist of one or more elements (modules) that can be connected to obtain a complete ...
-
Manufactured by Cobey Incbased in USA
Due to the effects of compression to the dew point of gas, a CNG station operator must adequately dehydrate their gas supply. Dry gas is critical to the compressor, ASME storage tanks, and the end user’s vehicles. Dry gas assures proper system operation and reduces the formation of harmful corrosive products such as carbon dioxide, and hydrogen sulfide. Single and dual tower models ...
-
Manufactured by Jagdamba Industriesbased in INDIA
The field of technical ceramics began with the development of porcelain in 1849. Today, porcelain is primarily used in electro-technical ...
-
Manufactured by Willfar Information Technology Company Ltd.based in CHINA
JYW-60 overhead power line fault indicator, adopts uitralow power consumption wireless MCU, and integrated high performance microprocessor and RF transceiver as well as high resolution ADC(analog-to-digital converter) inside, conforms to Q/GDW 436-2010 standard. Combining micro-power wireless networking technology of our company and advanced algorithm for fault section detection in distribution ...
-
Manufactured by Chongqing Acore Filtration Co. Ltdbased in CHINA
VTP-5(300 liters per hour) Single Stage Vacuum Transformer Oil Purifier is mainly used to separate impurities, dehydration, degasification and improve the quality of used transformer oils. It mainly adopts vacuum purification principle, Italian three-dimensional flash technology, thin film evaporation technology and multi-stage precision filtration, so that the Vacuum Transformer Oil Filtration ...
-
Manufactured by CMC Klebetechnik GmbHbased in GERMANY
The material known as Hostaflon, Fluon or Tefzel is today used as a transparent building envelope worldwide in the form of films (Watercube Beijing, Allianzarena Munich). Special advantages of ETFE films are their low weight, extremely high weather resistance (> 30 years) and transparency. Applications in solar technology require in many cases a very good weather resistance. In this ...
-
Manufactured by Southwest Gooseneckbased in USA
Sizes range from 102' wide x 20' long to 24' long, 2 - 7k Dexter axles, 12' I-beam neck & frame, 3' I-beam cross members, new 7.50-16' 10 ply tires on mod wheels, 2' treated decking, LED ...
-
Manufactured by AIRE Environmentalbased in USA
Diversion Tube are a green alternative to sandbagging. The AIRE Industrial Diversion Tube Connection Sleeve connects tubes together end to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you