Electrical Insulation Equipment For Power Distribution In USA
-
Distributed by Fluorostorebased in USA
These FEP straight lengths come in 6-foot sizes and possess the same properties as standard FEP. They are a great choice as an electrical insulator in high voltage equipment, sight glass tubes, or machined to short lengths for mechanical ...
-
Manufactured by CoorsTek Inc.based in USA
The automotive & transportation landscape is changing rapidly. From autonomous technologies to electric and advanced fueling systems to car sharing and connected mobility, transportation systems of the future will require new and innovative technologies, materials, and designs. Systems will run hotter, longer, and have more electrical and wireless connections. In the meantime, traditional ...
-
Manufactured by Eugen Arnold GmbHbased in GERMANY
Electric trace heaters are used to achieve and maintain prescribed operating temperatures and to protect components against frost. This not only increases efficiency but also reduces (repair) costs. Especially with temperature-sensitive materials, cables with a high risk of freezing and applications with high process temperatures, electric heat tracing is a sensible and effective solution. That ...
-
based in USA
In addition to manual leak location surveys, an Electrical Leak Imaging and Monitoring (ELIM) system can be permanently installed to monitor for leaks in the landfill liner. The ELIM system uses a series of electrodes placed on top of or underneath the geomembrane liner during liner installation. The electrodes are connected to an instrument panel used to make the electrical measurements. A ...
-
based in USA
DLC Coating stands for diamond-like carbon coating, and is a nanocomposite coating that has unique properties of natural diamond low friction, high hardness, and high corrosion resistance. DLC coatings can have different structures and properties that rely on the ratio of SP3 (diamond) and SP2 (carbon) or other fillers like hydrogen, silicon, and metal in the ...
-
Manufactured by MacLean Power Systemsbased in USA
The MPS 8" Transmission Pipe Pile is a helical pile designed to resist large axial, lateral and moments loading. Transmission Pipe Piles are used in foundations of substations and lattice towers. ...
-
Manufactured by Omega Piezo Technologiesbased in USA
Omega is a supplier of high quality alumina components. These materials offer excellent wear resistance, electrical and thermal insulation characteristics as well as high temperature strength. They are also exceptional in abrasive and corrosive ...
-
Manufactured by SAS Safety Corpbased in USA
Rubber electric insulating glove. Class 0 Type 1. Meets ASTM D120 standards. 12” length rolled cuff. Lightweight. Protects up to 1000 volts AC / 1500 volts DC. Class 00-4 testing on electric service gloves inspected and tested in the USA. To schedule re-testing of your electric glove, call 1-800-262-0200. Part #’s: 6417, 6418, 6419, 6420. ...
-
Manufactured by Advanced Ceramic Materials (ACM)based in USA
Alumina, or aluminum oxide, with a molecular weight of 102, is the major source of aluminum in nature. Alumina has very high melting point, which is 2,072 °C and it is extremely hard. Alumina ceramic is the most common technical ceramic material and a relatively traditional material. High purity alumina ceramics as a fine ceramic material is widely used in a lot of ...
-
Manufactured by Rise Technology srlbased in ITALY
Automatic Laminator that allows to store in its memory various production cycles, through a PLC. Lamination 4500x1300mm modules, using Standard or Fast type EVA. The laminated modules are comply to 503JRC specifications (exposition cycles: Thermal, humidity, freeze, thaw, mechanical load, torsion, pressure or single point impact and electrical insulation). Touch-Screen panel, which allows to ...
-
Manufactured by Allied Environmental Technologies, Inc.based in USA
The need for the ultimate Waste Destruction offered by plasma discharge technology is evident from population growth in all nations, deterioration of water supplies, increased production of toxic wastes and infectious hospital wastes, and the diminishing amount of land that can be used for municipal solid waste dumps. Because of these increasing volumes of all types of wastes and the increased ...
-
Manufactured by Cobey Incbased in USA
Due to the effects of compression to the dew point of gas, a CNG station operator must adequately dehydrate their gas supply. Dry gas is critical to the compressor, ASME storage tanks, and the end user’s vehicles. Dry gas assures proper system operation and reduces the formation of harmful corrosive products such as carbon dioxide, and hydrogen sulfide. Single and dual tower models ...
-
Manufactured by Southwest Gooseneckbased in USA
Sizes range from 102' wide x 20' long to 24' long, 2 - 7k Dexter axles, 12' I-beam neck & frame, 3' I-beam cross members, new 7.50-16' 10 ply tires on mod wheels, 2' treated decking, LED ...
-
Manufactured by AIRE Environmentalbased in USA
Diversion Tube are a green alternative to sandbagging. The AIRE Industrial Diversion Tube Connection Sleeve connects tubes together end to ...
-
Manufactured by Mid-Mountain Materials Inc.based in USA
HYTEX 500 Nomex Flame Resistant Textiles are excellent for use in applications that require abrasion resistance, and high ...
-
Manufactured by Insulation Machinesbased in USA
Contractors often find vacuuming needs within a building. Large commercial, industrial and residences need the unit inside their building. The CoolVac electric vacuums allow the flexibility of working inside because they do not use gas ...
-
Manufactured by Huntsman International LLCbased in USA
Our Araldite line of very low viscosity, di-functional cycloaliphatic epoxy resins are designed for epoxy formulators needing high-temperature resistance, good electrical insulation performance and UV ...
-
Manufactured by Saint-Gobain Performance Plasticsbased in USA
Polyimide Films provide excellent electrical, thermal, physical and chemical properties over a wide temperature range in a lightweight package (136 sq ft/lb [28 m2/kg] for 1 mil) making them superior for electrical insulation applications. CHEMFILM® polyimide films are produced in a world-class process that makes them dimensionally stable and inherently isotropic, meeting exacting tolerances, ...
-
Manufactured by Kett Tool Companybased in USA
Panel saw kit includes: KS-23 saw head, 567-2A connecting sleeve, 170-25 coupler, 154-54 spacer, wrenches and 4 assorted saw ...
-
Manufactured by Valtech Corporationbased in USA
The VALTRON Photovoltaic Slicing Beam is made of a unique composite polymer proven to be very effective with wire saw slicing equipment for photovoltaic wafer processing. The substrate materials are electrically insulating and can be mounted directly to wire saw mounting fixtures, eliminating the need for glass and other substrates. The unique surface characteristics promote improved adhesive ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you