Electrical Networks Equipment For Power Distribution
-
Distributed by Alaska Energiesbased in FRANCE
Solution designed for installers, saving up to 50% on electricity bills. All-in-one: energy consumption meter, photovoltaic generation meter, water heating controller, factory-pre-cabled electrical cabinet, electrical protection. Easy, quick installation (plug and play): same installation time as a conventional electrical cabinet. PLC (power line communications), Single-phase or three-phases, ...
-
Manufactured by Ganpati Engineering Industriesbased in INDIA
Tin is a chemical element with symbol Sn (for Latin: stannum) and atomic number 50. It is a main group metal in group 14 of the periodic table. Tin shows chemical similarity to both neighboring group-14 elements, germanium and lead and has two possible oxidation states, +2 and the slightly more stable +4. Tin is the 49th most abundant element and has, with 10 stable isotopes, the largest number ...
-
Manufactured by Spar Power Technologies Inc.based in CANADA
We provide rectifiers upto 600 VDC, 1000 Amp. with digital controllers six and twelve pulse design for reduced harmonic operations for various industrial ...
-
Manufactured by Ganpati Engineering Industriesbased in INDIA
Tin is a chemical element with symbol Sn (for Latin: stannum) and atomic number 50. It is a main group metal in group 14 of the periodic table. Tin shows chemical similarity to both neighboring group-14 elements, germanium and lead and has two possible oxidation states, +2 and the slightly more stable +4. Tin is the 49th most abundant element and has, with 10 stable isotopes, the largest number ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Gas engines are well suited to acting in island mode operation as a captive power plant. Island mode operation relates to those power plants that operate in isolation from the national or local electricity distribution ...
-
Manufactured by Hale Products Incbased in USA
The Power Distribution Module (PDM) is an ES-Key node designed to allow a designer the ability to utilize the product within the ES-Key electrical system network. The module responds to commands to activate its physical outputs and reports the state of its inputs back to the network. The module has up to 12 outputs of which 4 of the outputs can be configured as polarity selectable inputs. It also ...
-
Manufactured by Energy Acebased in UNITED KINGDOM
All mains powered electrical equipment and plant require a voltage input to be maintained within certain limits although equipment receiving voltages outside of the allowable limits may malfunction or fail prematurely. In real terms, a low supply voltage will cause malfunction and a high supply voltage, serious damage. In countries with a developing electrical network and economy, a demand for ...
-
Manufactured by Protonix Fortuner India Private Limitedbased in INDIA
A Solar Inverter converts the variable direct current (DC) output of a photovoltaic (PV) solar panel into a utility frequency alternating current (AC) that can be fed into a commercial electrical grid or used by a local, off-grid electrical network. It is a critical balance of system (BOS) component in a photovoltaic system, allowing the use of ordinary AC powered equipment. Solar power inverters ...
-
Manufactured by Aria srlbased in ITALY
The Libellula wind turbines are equipped with a remote control system, using a Short Message Service (SMS) designed to send and receive messages to/from a control terminal (mobile phone or other GSM connected equipment). The system allows a very simple use even with a mobile phone that can be used in order to receive messages and reports and/or in order to send requests of data or ...
-
Manufactured by CHEEMA BOILERS LIMITEDbased in INDIA
Independent power producers (IPPs) develop, own, and operate power plants to generate electricity. IPPs seek the most cost-effective and reliable power plant offerings to serve the demands. ...
-
Manufactured by Shine Industriesbased in INDIA
The Insulating Termination Bushing Boot is a right-angled adapter designed to fit over standard bushings to Type C according to EN 50181. The insulated adapter termination system provides perfect sealing, electrical insulation and an electrical connection between terminations and SF6-insulated switch-gear up to 24 ...
-
Manufactured by Metalogalva - Irmaos Silvas, SAbased in PORTUGAL
The power sector is generally divided into the activities of generation, transmission and distribution. The Metalogalva produces the metal structures for power lines. In Portugal, has been the principal supplier of EDP (Electricidade de Portugal) operators (ordinary regime and the national grid) and REN (national electrical ...
-
Manufactured by Metal Deploye Resistorbased in FRANCE
High power electrical installations, for use by industrial direct currents , often generate disturbances on the networks. These disturbances will then modify the behavior of the sensors and trigger the electrical safety devices. To improve the quality of the signal and therefore the efficiency of the installations, the objective is to remove unwanted harmonics. A role played by filter ...
-
Manufactured by Röhrenwerk Kupferdreh Carl Hamm GmbHbased in GERMANY
This tight sleeve connection (ZSM connection) is included in the range of axial non-positive and detachable pipe connections and is used for interconnected wells in brown coal open cast mining and as pit pipeline in hard coal mining. The sleeve system which is protected by copyright is an appealing alternative to conventional connecting systems for dimensions thanks to its quick and easy ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
A captive power plant is a facility that is dedicated to providing a localised source of power to an energy user. These are typically industrial facilities or large offices. The plants may operate in grid parallel mode with the ability to export surplus power to the local electricity distribution network. Alternatively they may have the ability to operate in island mode; i.e. independently of the ...
-
Manufactured by Pure Energy Centre (PEC)based in UNITED KINGDOM
The Pure Energy Centre is a Solar Photovoltaic Panel Installer in Shetland. We provide complete Solar PV Installation services for the public, private and business sectors. The Team at the Pure Energy Centre held the UK MCS accreditation for installing solar panels on top of your Shetland’s roofs. Our team is also accredited to install solar systems on the ground if you prefer this option. ...
-
Manufactured by Chongqing Blue Jay Technology Co.,Ltdbased in CHINA
OPT Series Solar inverter (PV inverter) converts the variable DC output of a photovoltaic (PV) solar panel into a utility frequency alternating current (AC) that can be off-grid electrical network. It is a critical balance of system–component in a solar power system, allowing the use of ordinary AC-powered equipment. Suit for home applicance, office equipment, solar power system, and other ...
-
Manufactured by TEXA UK Ltd.based in UNITED KINGDOM
The UNIProbe is an device for analogue and digital type measurements; the best and most complete solution for all traditional diagnosis tests. The UNIProbe allows for the complete multi-make diagnosis and can intervene on cars, motorcycles, scooters, quad bikes and boats, as well as on light and heavy commercial vehicles, coaches and agricultural vehicles. The UNIProbe communicates with all TEXA ...
-
Manufactured by Hemstedt GmbHbased in GERMANY
The Hemstedt EX connecting sleeve can be used to connect the heating cable to both the power grid as well as other cables, thus being suited perfectly for the installation of heating systems. Additionally, the sleeve is aivalable for cable diameters ranging from 2,5mm² to 16mm². The explosion-proof EX connetive sleeve is also the right choice for potentail repairs on EX heating ...
-
Manufactured by Made S.A.based in FRANCE
JUPITER+ consists of a transmitter and a Receiver, both can be used on the electric network, off line and grounded. The transmitter must be connected in a substation, on a MV cell or a LV feeder, using the 3 current clamps connected to each phase, excluding the outer sheath. The receiver allows cable pre-identifying, continuity checking and phase identifying in open circuit or short circuit ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you