Energy Transmission Equipment For Power Distribution
-
based in ITALY
We build embedded solutions for energy production, delivery, storage and processing.The electricity grid is the complex of energy transmission and distribution systems, to which production plants (active connections) and passive users (passive connections) are connected (in HV, MV and LV). Meridionale Impianti strong in the construction, in Italy and abroad, of multiple electrical systems, ...
-
Manufactured by Egnatia Groupbased in GREECE
The most of our company production activities are dedicated to the manufacturing and construction of electricity transmission lattice towers, for different voltage systems, for the development of various energy transmission ...
-
Manufactured by Beijing Sunda Solar Energy Technology Co., Ltd.based in CHINA
SEIDO1 is a heat pipe vacuum tube with a flat absorber profile. SEIDO1 tubes have large dimensions with an outer diameter of 100 mm and a length of 2000 mm. The heat transfer from the absorber to the heat circulation is performed by the heat pipe which is mounted in the absorber. This heat pipe had originally been developed for the thermal control in satellites. Inside the pipe, the heat is ...
-
Manufactured by Helios Quartz Group SAbased in SWITZERLAND
Radiation, compared to convection and conduction, is the most powerful and efficient way of heating a material. In fact radiation does not need to come into direct contact with the surface of the products to be heated up and does not require the presence of any intermediary agent such as ...
-
Manufactured by Elm Solar Energy Co.,Ltdbased in CHINA
High conversion efficiency, high-transmission rate Energy saving, environmental-friendly Advanced technology, strict quality control system Easy installation, safe operation, free maintenance Low MOQ, fast delivery time, long service ...
-
Manufactured by Ganz Engineering and Energetics-machinery Manufacturer Ltdbased in HUNGARY
Adjustable guide vane ring for changing the water amount. The stainless steel guide vanes are powered by carbon steel levers with safety sliding clutches. The guide vanes rotate in maintenance-free pins, which are in the turbine covers with stainless steel protection. If necessary, they are equipped with a guide vane adjusting system, this ensures good efficiency in a wide operating ...
-
Manufactured by EKIN METAL A.Sbased in TURKEY
Flat hot plates are flat steel products obtained by milling the substance or rectangular slab produced from scrap at approximately 800 degrees. Steel Roll : Products with thicknesses ranging between 1.20-25.00 mm in general. Sheet Metal : Products with thicknesses ranging between 6.00 - 200.00 mm and widths between 1000-3600 ...
-
Manufactured by Balluff GmbHbased in GERMANY
If modules need to be disconnected and coupled up in an automated fashion, you can rely on Balluff's inductive couplers. With the quick-disconnect units, you can realise new requirements extremely flexibly and quickly. In addition to fast signal transmission, inductive couplers ensure the safe transmission of ...
-
Manufactured by Seco/Warwick S.A.based in POLAND
Automotive industry: crankshafts, camshafts, pistons, pins, pumps, engine accessories, shafts, racks. Aircraft industry: tooth wheels, conical and spiral wheels, under-carriage parts. Machine building industry: shafts, sleeves, pins, tooth wheels, chains. Mining industry: drilling rods, mono-blocks, bits. Bearing industry: bulky bearing elements. Wind energy industry: large power transmission ...
-
Manufactured by Leifeld Metal Spinning AGbased in GERMANY
The SC series comprises high-performance metal spinning machines that are notable for their stability, flexibility and user-friendliness. The proven machine concept is characterised by its sturdy construction with optimum access to the workspace and is ideal for the efficient manufacture of a wide variety of products, whether in small, medium-sized or large batch ...
-
Manufactured by geoKOAX GmbHbased in GERMANY
geoKOAX is a large volume coaxial probe with high annual performance figures The geothermal heat storage of geoKOAX, higher flow temperature to the heat pump and decoupling of the operation of the heat pump lead to high annual performance ...
-
Manufactured by AGC Solarbased in JAPAN
Our AR coating technology is unique worldwide. We have one of the best performing and world’s largest continuous vacuum coating systems for producing high-end functional films on glass. Thin films (in the nanometer range) are produced under the purest of vacuum conditions. f | solar’s ultra-durable, anti-reflective coating increases energy transmission and ensures a consistently high ...
-
Manufactured by Mingyang Smart Energy Group Co., Ltdbased in CHINA
CdTe thin film solar modules manufactured by Mingyang Smart Energy is the first PV product in China that was granted double certifications from CGC and VDE. Compared with c-Si solar modules, they generate more power in low irradiance, perform better in various weather conditions. They are safer, more friendly to environment, and have better appearance. They are widely used in solar farms, ...
-
Manufactured by Elm Solar Energy Co.,Ltdbased in CHINA
High conversion efficiency, high-transmission rate Energy saving, environmental-friendly Advanced technology, strict quality control system Easy installation, safe operation, free maintenance Low MOQ, fast delivery time, long service ...
-
Manufactured by EKIN METAL A.Sbased in TURKEY
Checkered plate utilization areas; In energy transmission line gates, In stairs, In bridge and overpass paths, In vehicle and entry ramps, In walking paths of ships and factories, In truck haulages, In heavy industry machinery, In manholes, In door ...
-
Manufactured by Elm Solar Energy Co.,Ltdbased in CHINA
Whether you’re a homeowner, business, or nonprofit, electricity costs can make up a large portion of your monthly expenses. With a solar energy system, you’ll generate free power for your system’s entire 25+ year lifecycle. More importantly, the solar power system is not a cost, it’s one of the best ways to invest. Due to a large amount of electricity bills saved, you pay ...
-
Manufactured by Sumitomo Electric Industries, Ltd.based in JAPAN
The Sumitomo Electric Group operates its wiring harness business globally to offer various products that meet the needs of the times with superb technologies and quality. The product lineup includes wiring harnesses for transmitting electric power and information in vehicles and products for environmentally friendly HEVs and ...
-
Manufactured by Beacon Powerbased in USA
Beacon’s Power Control Module (PCM) is the “brains” of the flywheel storage system and provides the power and signal interfaces for each flywheel storage unit. The PCM allows stored energy to be coupled seamlessly to the grid, enabling instant response and maximum operational flexibility. Beacon can optimize flywheel installations to suit the unique characteristics of each ...
-
based in GERMANY
The change from a supply-oriented to a demand-oriented energy policy and the transition to decentralised energy generation presents major challenges for both energy consumers and providers. A long-term network integration of volatile available renewable energies means that energy providers in particular need improved control options and precise prognoses of anticipated outputs to avoid network ...
-
Manufactured by Layer Electronics S.r.l.based in ITALY
The bidirectional electronic stabilizers SE Solar prevent the interface protection units from detaching, stabilizing the grid voltage. They can be installed in the following positions: a) Downstream of the exchange / sale energy meter (recommended) to stabilize both the user and the PV system; b) Inverter energy meter’s output to stabilize the PV system only; c) On the section that supplies ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you