High Voltage Insulation Equipment For Power Distribution Available In Latin America
-
Manufactured by Spellman High Voltage Electronics Corporationbased in USA
Spellman’s FIB Series is an integrated multiple output high voltage power supply specifically designed for focused ion beam applications. It incorporates a high stability accelerator voltage with the floating outputs to drive traditional Ga Ion and Plasma Sources. An additional Lens Chassis is available, providing the high performance fixed or reversible polarity high voltage lenses ...
-
Manufactured by Sanergridbased in FRANCE
Allows control of a large number of high voltage insulators in the substation: power transformers, bushings, circuit breakers, disconnectors, current transformers, voltage transformers ... in porcelain, glass or ...
-
Manufactured by Nanjing Xingtailong Special Ceramics Co., Ltdbased in CHINA
High voltage output insulation for power transformers Rated DC voltage 45 ~ ...
-
by XALT Energybased in USA
Battery Disconnect Unit/String Control Unit (BDU/SCU). The BDU manages individual strings of series-connected XMP subpacks through its on-board String Controller Unit (SCU), pre-charge circuit, current sensor, and contactors. For large XPAND systems of multiple parallel-connected strings, BDUs are connected in parallel. Compatible with 12V or 24V systems, Isolated high voltage measurements up to ...
-
Manufactured by ELECTRONICON Kondensatoren GmbHbased in GERMANY
We have come up with a simple but effective – and very reliable – solution for high-voltage applications: even in the 50kV range, we can do without expensive ceramic ...
-
Manufactured by Knick Elektronische Messgeräte GmbH & Co. KGbased in GERMANY
Compact high-voltage isolation amplifiers with safe galvanic isolation, VariPower broad-range power supply and genuine calibrated range selection. Working voltages up to 1000 V AC/DC and test voltages up to 5.4 kV AC, maximum performance in a compact modular ...
-
Manufactured by ILSCObased in USA
Manufactured from electrolytic copper tubing and strip stock. Compact design. Range Taking for reduced inventories and flexibility. Re-Usable. UL 486A/B Listed and CSA Certified. Suitable for use in circuits rated at 35 KV or less; proper high voltage spacing and insulation techniques must be used. V-bottom collar. Contact Factory for listed wire combinations. For Copper Conductor only.. A - UL ...
-
Manufactured by ILSCObased in USA
Compact design. Range Taking for reduced inventories and flexibility. Re-Usable. UL 486A/B Listed and CSA Certified. Suitable for use in circuits rated 35KV or less; proper high voltage spacing and insulation techniques must be used. V-bottom collar. Contact Factory for listed wire combinations. For Copper Conductor only.. A - UL listed combinations (2) 10 STR. or (2) 12 STR. or (2) 14 STR. or ...
-
Manufactured by IPEC Ltdbased in UNITED KINGDOM
The HFCT is a high frequency current transformer designed specifically for picking up partial discharge signals, predominantly in cables. It has a split core ferrite to allow retrospective fitting to earth straps without the need for disconnection. The durable body has a hinge and a quick release latch, making use quick and easy. The HFCT is constructed with an aluminium body to provide RF ...
-
Manufactured by Mersenbased in FRANCE
CALCARB® CBCF is made up of carbon fibres measuring just a few millimeters in length, emanating from rayon fibres. These fibres are interconnected in a matrix produced by the carbonisation of phenolic resin. The material is then vacuum-treated at temperatures above 2,000°C to ensure its temperature stability and the absence of outgassing. As a benchmark, the material contains no more than ...
-
Manufactured by Liaoning Unify High Frequency Equipment Co., Ltdbased in CHINA
It is an advanced process method to dry and mold the insulated board with high-frequency electric field. This production method has many obvious advantages compared with the traditional steam, electric drying, and hot air processing methods. The high-frequency drying equipment developed by our company for high voltage transformer's insulation board is advanced in technology and perfect in ...
-
Manufactured by Fujian RuiSen New Materials Co., Ltd.based in CHINA
A functional insulator coating to protect insulators in pollution area, such as industrial area, coastal area and other extreme environmental conditions, also can be used in normal environmental ...
-
Manufactured by Huntsman International LLCbased in USA
Our Araldite line of very low viscosity, di-functional cycloaliphatic epoxy resins are designed for epoxy formulators needing high-temperature resistance, good electrical insulation performance and UV ...
-
Manufactured by Von Roll Holding AGbased in SWITZERLAND
Von Roll has the right solution to improve the quality and cost-effectiveness of the high-voltage insulation you need for your ...
-
Manufactured by Nanjing Xingtailong Special Ceramics Co., Ltdbased in CHINA
Grounding insulation for high voltage electricity through building walls or high voltage cabinet housings. Rated voltage 12~40.5kV; rated current 400~3150A; bending load≥8 ...
-
Manufactured by P. Energybased in ITALY
LAB-LAMINATOR L036LAB is an automated photovoltaic module laminator. LAB-LAMINATOR L036LAB is the right solution for Schools, Universities, Laboratories, R&D Centres. It is the best laminator to encapsulate little laminates as standard modules made with plastic, glass or other material. It permits to laminate in standard mode using a standard cure EVA or using a fast cure ...
-
Manufactured by HVPDbased in UNITED KINGDOM
The HVPD Kronos® Spot Tester is a brand new portable diagnostic test unit for detecting On-line Partial Discharge (PD) in all types of in-service plant, including cables, switchgear, transformers and rotating machines operating at 3.3 kV and above. ...
-
Manufactured by Emco Wheaton - Gardner Denverbased in UNITED KINGDOM
To avoid dangerous sparks between a component and the tank during the loading operation, the tank must be earthed. The basic function of the DCMT 3 is to automatically earth the tank to the ground, preventing dangerous sparks between the rig and the tank and minimizing operator error. DCMT3 is programmable and changes to the set up values for electrical recognition can be made. The value of ...
-
Manufactured by Verivolt LLCbased in USA
The IsoBlock V module has been designed to provide high-quality isolated differential voltage measurements for applications requiring scaling of high voltages, as well as superior isolation. Each IsoBlock V unit hosts four separate isolated channels, each of which can be connected to separate measurement sources while providing a range of functional coverage up to 1500V. The input of each ...
-
Manufactured by Liaoning Unify High Frequency Equipment Co., Ltdbased in CHINA
It is an advanced process method to dry and mold the insulated board with the high-frequency electric field. This production method has many obvious advantages compared with the traditional steam, electric drying, and hot air processing methods. The high-frequency drying equipment developed by our company for high voltage transformer's insulation board is advanced in technology and perfect in ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you