Load Banks Equipment For Power Distribution In Asia & Middle East
-
Manufactured by Kongter Test & Measurement Co., Limitedbased in CHINA
K-3980J AC load bank contains many different customized models containing following ...
-
Manufactured by Schneider Electricbased in FRANCE
The SW Power Distribution Panels are pre-wired out of the box and labeled to support the integration of SW inverter/chargers with a MPPT Soolar Charger Controller, battery bank and load ...
-
Manufactured by Crestchic Ltd.based in UNITED KINGDOM
To test at conditions replicating a lagging power factor and to ensure complete engine and alternator test; a resistive-reactive load bank is essential. Crestchic design and manufacture a wide range of fixed or variable power factor resistive-reactive load banks in standard frames sizes & containers, from 50kVA to 6250kVA, built to your specific voltage, frequency and phase requirements. All ...
-
Manufactured by Crestchic Ltd.based in UNITED KINGDOM
With footprint size an ever vital consideration in many markets, our MV load banks provide higher voltages with integrated transformers & load banks packaged in one ISO container. Available in wide range of voltages from 600v to 33kV in both resistive and resistive-reactive configuration. Crestchic will design and build MV load banks to your exact voltage, frequency and capacity ...
-
Manufactured by Crestchic Ltd.based in UNITED KINGDOM
To complement our range of load banks and also serve the international temporary power generation sector, Crestchic manufacturers a range of containerised step-up/step-down transformers. The multi-tap transformers range from 2000kVA to 8000kVA, with voltage up from 600v to 34.6kV. ...
-
Manufactured by Foresight Electronics Co, Ltd.based in CHINA
Load Element: Stainless steel resistors. Load Voltage: DC900V. Load Power: Total: 930KW, (Channel 1:465KW, Channel 2: ...
-
Manufactured by Deyang Rata Technology Co., Ltdbased in CHINA
DC load banks (electric discharge load) are suitable for testing the output power and carrying capacity of communication and AC equipment such as power supply, UPS equipment, AC voltage regulator, inverter and switching power supply. It is used for daily maintenance test, engineering acceptance and factory inspection test of various DC power supply. The DC load banks of our company adopts high ...
-
Manufactured by Foresight Electronics Co, Ltd.based in CHINA
FST series AC/DC load banks are for many power supplies load bank testing, to ensure that the standby power supply system say UPS(uninterrupted power supply), battery bank, generator, transformers, inverter etc which especially located in harsh, dusty or corrosive environment working in good condition, when you need them most, if switched to be loaded when the main power supply in maintenance ...
-
Manufactured by Foresight Electronics Co, Ltd.based in CHINA
Regular AC load bank testing of generators provides an essential health check service to prevent diesel engine failure due to wet stacking. Wet stacking occurs due to under loading of the genset which results in wet un-burned fuel building up in the engine. Junxy Energy offers the AC load bank which could meet your ...
-
Manufactured by Schneider Electricbased in FRANCE
20ft ISO Construction - MV - Resistive Reactive - 1500kVA – 2750kVA @ 0.8pf - 690V – 24kV - 50/60Hz. The 8800 is a containerized resistive inductive load bank with an integrated transformer for medium and high voltage testing. Available with capacities from 1500kVA - 2750kVA and a choice of voltages and frequencies. Designed in a 20ft containerized construction, the 8800 is perfectly ...
-
Manufactured by Crestchic Ltd.based in UNITED KINGDOM
The LC60 controller is a personal field controller suitable for both AC resistive and resistive-reactive load banks and DC load banks also. It works in-conjunction with an industrial high performance microprocessor housed within the load bank enclosure which provides supervisory operation & monitoring of the load ...
-
Manufactured by Keypower Solutions(Fujian) Co.,Ltdbased in CHINA
Model: KPLB-2400 Testing capacity: 0 – 2400 kw Type of load: Resistive, PF = 1.0 Duty:Continuous Cooling system: Industrial grade axial fan Phase: Available at both single and three phase Rated testing voltage: 110-480 VAC Rated Frequency: 50/60 Hz Load bank is a simulating load test equipment used for generators, UPS, battery banks etc power systems load test. pecifications 100-2400KW Load ...
-
Manufactured by Deyang Rata Technology Co., Ltdbased in CHINA
Low voltage resistive load banks are special equipment for generator type test and factory inspection. The optional intelligent test system can automatically complete the measurement of all electrical parameters of the generator, and automatically generate various charts, curves and ...
-
Manufactured by Foresight Electronics Co, Ltd.based in CHINA
1 System Overview 1.1 Foreword (1) According to the special requirements of users on site, in the agreement the technical standards of AC400V-500kW Resistive Load Bank (hereinafter referred to as ...
-
Manufactured by Deyang Rata Technology Co., Ltdbased in CHINA
Medium voltage resistive load banks are special equipment for detecting medium-voltage power supply,which can directly measure medium voltage power supply without transformer.The medium voltage resistive load banks generally adopts the remote operation mode,which is connected with the load body through the network cable of notebook or experimental platform to control the load and ensure the ...
-
Manufactured by ITECH ELECTRONIC CO., LTD.based in TAIWAN
IT8700P+ series high-speed multi-channel DC electronic load is an upgraded version of the original IT8700P series with higher speed and higher precision. Its modules support master-slave paralleling connection for power extension. It's compatible with IT8700P mainframe, the new modules and old modules can work together. The IT8700P+ modules have faster dynamic response and can make the minimum ...
-
Manufactured by Aggrekobased in UNITED KINGDOM
Our loadbank testing will make sure your power won’t let you down when you need it most. Loadbanks are used to test electrical power supplies. They simulate variable electrical load conditions in a way that can be accurately controlled, measured and recorded. It’s vital to test your systems so you know they’re up to the job – whether you’re commissioning new ...
-
Manufactured by SineTamer Power Private Limitedbased in INDIA
Zero-change-over-time. Characteristics of an Online UPS, without double conversion losses. Saves 35-40% of electricity bills and initial investment, in comparison with Online UPS. Ensures 100% uptime. Mains voltage conditioning. Extends the life of connected gadget (LED lights, home theatre, PCs/servers) by 35% in comparison to Off-line UPS/Inverters. DSP controlled Pure Sinewave UPS. ...
-
Manufactured by Avatec Power Pte Ltdbased in SINGAPORE
This load bank is either stationary or mobile type, for DC load testing applications, at rated current up to 1000A, and voltage up to 500V. Customised, designed and manufactured strictly based on the customer’s specifications. With manual incremental load steps, this load bank provides accurate load control. Safety features include load protection system, fan failure shutdown, airflow ...
-
Manufactured by Trom Industries Limitedbased in INDIA
Trom’s Hybrid solar power pack system is designed to operate high loads and charge battery banks through solar power and grid power as the case may be. When the utility power is unavailable or too expensive to bring in to your home or cabin, solar panels allow you to be your own utility company! You can live in peace, with no noisy gas generator to disturb the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you