Load Banks Equipment For Power Distribution
-
Manufactured by Foresight Electronics Co, Ltd.based in CHINA
FST series AC/DC load banks are for many power supplies load bank testing, to ensure that the standby power supply system say UPS(uninterrupted power supply), battery bank, generator, transformers, inverter etc which especially located in harsh, dusty or corrosive environment working in good condition, when you need them most, if switched to be loaded when the main power supply in maintenance ...
-
Manufactured by Foresight Electronics Co, Ltd.based in CHINA
Regular AC load bank testing of generators provides an essential health check service to prevent diesel engine failure due to wet stacking. Wet stacking occurs due to under loading of the genset which results in wet un-burned fuel building up in the engine. Junxy Energy offers the AC load bank which could meet your ...
-
Manufactured by Schneider Electricbased in FRANCE
20ft ISO Construction - MV - Resistive Reactive - 1500kVA – 2750kVA @ 0.8pf - 690V – 24kV - 50/60Hz. The 8800 is a containerized resistive inductive load bank with an integrated transformer for medium and high voltage testing. Available with capacities from 1500kVA - 2750kVA and a choice of voltages and frequencies. Designed in a 20ft containerized construction, the 8800 is perfectly ...
-
Manufactured by Tehnolink d.o.o.based in SERBIA
TEHNOLINK offers a Load Bank models that are robust, broad-spectrum power (50kW¸1000kW) and specially designed for working in outdoor conditions. STLB (Stationary TEHNOLINK Load Bank) sets high standards with intelligent control management, high protective measures, adjustable step loads and effortless ...
-
Manufactured by Crestchic Ltd.based in UNITED KINGDOM
The LC60 controller is a personal field controller suitable for both AC resistive and resistive-reactive load banks and DC load banks also. It works in-conjunction with an industrial high performance microprocessor housed within the load bank enclosure which provides supervisory operation & monitoring of the load ...
-
Manufactured by Vertiv Cobased in UNITED KINGDOM
Managing critical power equipment can be challenging. Multiple annunciators utilize different interfaces. Generators and transfer switches require local operation for testing. Compliance requires manual data collection and labor-intensive ...
-
Manufactured by Keypower Solutions(Fujian) Co.,Ltdbased in CHINA
Model: KPLB-2400 Testing capacity: 0 – 2400 kw Type of load: Resistive, PF = 1.0 Duty:Continuous Cooling system: Industrial grade axial fan Phase: Available at both single and three phase Rated testing voltage: 110-480 VAC Rated Frequency: 50/60 Hz Load bank is a simulating load test equipment used for generators, UPS, battery banks etc power systems load test. pecifications 100-2400KW Load ...
-
Manufactured by Power Temp Systems, Inc.based in USA
Wall Mounted Generator Quick Connect Tap Boxes go by many names, including quick connect generator docking station, generator connection box, generator docking panel, or quick connect docking panels. Regardless of what you call them, they are a safe and convenient solution for connecting your facility to a portable generator in the event of a power ...
-
Manufactured by Deyang Rata Technology Co., Ltdbased in CHINA
Low voltage resistive load banks are special equipment for generator type test and factory inspection. The optional intelligent test system can automatically complete the measurement of all electrical parameters of the generator, and automatically generate various charts, curves and ...
-
Manufactured by ASCO Power Technologiesbased in USA
The ASCO 2705 Load Bank is a portable, self-contained AC resistive model designed for indoor use at 100 kW. The 2705 features the SIGMA LT control platform, which allows networking of multiple load ...
-
Manufactured by Foresight Electronics Co, Ltd.based in CHINA
1 System Overview 1.1 Foreword (1) According to the special requirements of users on site, in the agreement the technical standards of AC400V-500kW Resistive Load Bank (hereinafter referred to as ...
-
Manufactured by Automatic Timing & Controls (ATC)based in USA
The VCFP96M is a complete single phase and three phase digital metering system suitable for low, medium and high voltage control panels, gensets, load banks, building management systems and power management systems. The VCFP96M can be used on single phase, three phase three wire as well as three phase four wire balanced or unbalanced systems. The six easy to access front control keys are used for ...
-
Manufactured by Deyang Rata Technology Co., Ltdbased in CHINA
Medium voltage resistive load banks are special equipment for detecting medium-voltage power supply,which can directly measure medium voltage power supply without transformer.The medium voltage resistive load banks generally adopts the remote operation mode,which is connected with the load body through the network cable of notebook or experimental platform to control the load and ensure the ...
-
Manufactured by Metal Deploye Resistorbased in FRANCE
Capacitive and inductive (or inductive) load banks: for full load test or phase shift correction. ...
-
Manufactured by Intepro Systems America, LPbased in USA
The Intepro ML 1800 Series is a modular configured electronic DC load. The ML 1800’s 1800W chassis can hold up to 6 Load modules making it ideal for testing multiple-output power supplies and batteries as well as other DC power products. Modules are available in 300 watts (single slot) or 600 watts (two slots) and are rated up to 80 or 500 ...
-
Manufactured by ITECH ELECTRONIC CO., LTD.based in TAIWAN
IT8700P+ series high-speed multi-channel DC electronic load is an upgraded version of the original IT8700P series with higher speed and higher precision. Its modules support master-slave paralleling connection for power extension. It's compatible with IT8700P mainframe, the new modules and old modules can work together. The IT8700P+ modules have faster dynamic response and can make the minimum ...
-
Manufactured by Metal Deploye Resistorbased in FRANCE
3.3 MVA load bank and beyond by interconnecting them: control of the highest electrical power levels ...
-
Manufactured by Aggrekobased in UNITED KINGDOM
Our loadbank testing will make sure your power won’t let you down when you need it most. Loadbanks are used to test electrical power supplies. They simulate variable electrical load conditions in a way that can be accurately controlled, measured and recorded. It’s vital to test your systems so you know they’re up to the job – whether you’re commissioning new ...
-
Manufactured by SineTamer Power Private Limitedbased in INDIA
Zero-change-over-time. Characteristics of an Online UPS, without double conversion losses. Saves 35-40% of electricity bills and initial investment, in comparison with Online UPS. Ensures 100% uptime. Mains voltage conditioning. Extends the life of connected gadget (LED lights, home theatre, PCs/servers) by 35% in comparison to Off-line UPS/Inverters. DSP controlled Pure Sinewave UPS. ...
-
Manufactured by Avatec Power Pte Ltdbased in SINGAPORE
This load bank is either stationary or mobile type, for DC load testing applications, at rated current up to 1000A, and voltage up to 500V. Customised, designed and manufactured strictly based on the customer’s specifications. With manual incremental load steps, this load bank provides accurate load control. Safety features include load protection system, fan failure shutdown, airflow ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you