Overvoltage Equipment For Power Distribution In USA
-
PremiumManufactured by Mobiltex Data Ltdbased in CANADA
Designed to fit entirely under a standard CP test station, the RMU1+INT1 is truly a “hidden talent” delivering a small, powerful tool for remote monitoring of CP single or double coupons and structure bond applications that also provides permanent interruption ...
-
by Plexim GmbHbased in SWITZERLAND
HIL simulations of multi-level converters usually require a high number of digital gate signals and analog sensor measurements. The RT Box 3 is ideal for such multi-level applications because it provides twice as many analog and digital I/Os as the RT Box 2. Otherwise, the specifications are identical to those of the RT Box 2. ...
-
Manufactured by Kar-Tech, Inc.based in USA
Our VC-144 receiver is the flagship wireless control platform in our lineup. It’s loaded down with I/O count and options, and can run any of our radios at any frequency. It’s a processing powerhouse for demanding applications with its high-powered DSP processor, and up to 37 pins available for I/O and data. It’s able to accept and provide almost any signal type common in the ...
-
Manufactured by Raycapbased in GREECE
The deployment of Remote Radio Head (RRH) architecture poses unique challenges to the mobile telecom industry. Raycap’s innovative RRH protection solutions mitigate the risk of damage due to lightning and provide high levels of availability and reliability to radio ...
-
Manufactured by Ammonit Measurement GmbHbased in GERMANY
Nearly leakage current free overvoltage protection device for 2-data or signal lines, 2-wire bus networks. Coarse protection by 20kA (8/20μs) heavy duty-GDT. Fine protection by high speed suppressor-diodes. Low-pass filter characteristic against danger high frequent harmonics. Transversal and longitudinal voltage protection. Rigid and small size polycarbonate housing for DIN-rail or direct ...
-
Manufactured by Raycapbased in GREECE
Strikesorb 30SPDs protect mission-critical applications from successive overvoltage events. Strikesorb 30 modules are capable of absorbing and dissipating the energy of multiple electrical surges without degradation to the ...
-
Manufactured by LithiumHubbased in USA
Comparable to 900 cranking amps. This battery can be used as a starter battery for 250 hp Yamaha or Mercury motors. Battery Management Systems (BMS) with power terminal cut-off and recovery. Our heater battery warms up the battery to enable a charger once battery is warmed up. Ionic batteries have proprietary software embedded in the BMS to make our batteries 100% compatible with Yamaha or ...
-
Manufactured by Vapor Power Internationalbased in USA
Vapor Power electric steam boilers are designed to provide fast, efficient, and economical steam for heating and process through the use of electric resistance elements. The boiler controls automatically energize/de-energize steps of elements to maintain the desired steam pressure. All boilers utilize ASME pressure vessels and all electrical components are UL listed and are wired in accordance ...
-
Manufactured by Raycapbased in GREECE
In case of overvoltage, the TVL limits the dangerous voltage to very low safe values. In addition, in case of faults (e.g. accidental short-circuits with the contact lines), the TVL generates a durable conductive path between the overloaded area and the substation. This results in increased current loads being sensed at the substation, allowing an efficient tripping of the safety circuit ...
-
Manufactured by Raycapbased in GREECE
Strikesorb 40 surge protection devices protect mission-critical applications from lightning surges and overvoltage events. Even in the most lightning prone environments, Strikesorb 40 surge suppressor modules are capable of absorbing and dissipating the extreme energy of lightning strikes without degradation to the module. Suitable for wind turbine surge protection as well as other ...
-
Manufactured by Raycapbased in GREECE
Strikesorb 80 industrial surge suppression offers unparalleled lightning protection, protecting mission-critical applications from damage caused by lightning surges and other overvoltage events. Even in the most lightning prone environments, Strikesorb 80 lightning surge protectors are capable of absorbing and dissipating the extreme energy of lightning strikes without degradation to the ...
-
Manufactured by ON Semiconductorbased in USA
The NCP12400 is a new fixed−frequency current−mode controller featuring the Dynamic Self−Supply. This function greatly simplifies the design of the auxiliary supply and the VCC capacitor by activating the internal startup current source to supply the controller during start−up, transients, latch, stand−by etc. This device contains a special HV detector which detects ...
-
Manufactured by Filnor Incbased in USA
When a drive unit is attempting to rapidly brake a motor “Deceleration Braking Cycle” or when an “overhauling load” condition exists, the spinning motor acts as a ...
-
Manufactured by Raycapbased in GREECE
SafeTec is a reliable DIN rail SPD utilizing 2 States Mode (2SM). SafeTec incorporates a unique technology which is based on a patented thermal control function. Thus, it is an excellent SPD solution in power distribution network where temporary overvoltages (TOVs) or switching transients may be present. This all-in-one technology comes in a pluggable form factor, combines metal oxide varistor ...
-
Manufactured by Raycapbased in GREECE
Rayvoss A industrial surge protection systems are designed with Strikesorb 80 Surge Protective Devices (SPDs) inside. Offered in a variety of configurations, Rayvoss A systems can be customized to meet any electrical overvoltage protection ...
-
Manufactured by Raycapbased in GREECE
Rayvoss S industrial surge protection systems are designed with Strikesorb 40 Surge Protective Devices (SPDs) inside. Offered in a variety of configurations, Rayvoss S systems can be customized to meet any customer’s overvoltage protection ...
-
Manufactured by Raycapbased in GREECE
The remote locations, exposed surface areas and extensive layouts of solar power plants put them at high risk of damage from the elements, particularly electrical storms. A significant concern for photovoltaic (PV) power plant operators is equipment damage caused by direct or indirect lightning strikes. Damage from these events can bring a PV installation offline for days or perhaps weeks, ...
-
Manufactured by Raycapbased in GREECE
This product group has a modular design that complies with IEC/EN 61643-21, is available in voltages from 5 to 110 VDC, and comes with a variety of surge discharge ratings. Primarily available in a DIN Rail format, this group also includes products designed in stainless steel for use in explosive environments. Common applications include protection of DC power and data lines, Local Area Networks, ...
-
by Plexim GmbHbased in SWITZERLAND
The RT Box 2 speeds up the simulation of complex models of power electronics circuits. Models that can be split into separate physical sub-systems will benefit from the parallel processing capability. The RT Box 2 also offers additional analog and digital interfaces plus a solid-state drive for data storage.If you are looking for a real-time simulator with more analog and digital I/Os, you might ...
-
Manufactured by Raycapbased in GREECE
When impermissible touch voltage is developed, the RHP-SCD limits it to very low safe values by efficiently short-circuiting the negative rail and the earth. The programmable automatic opening of the RHP-SCD limits the effects of stray currents. In case of insulation faults (e.g. accidental short-circuits with the contact lines), the RHP-SCD generates a durable conductive path between the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you