Only show results in Virginia? Ok

Power Distribution Applications

  • Premium

    Industrial solutions for power and cogeneration industry

    WesTech engineers water and wastewater process solutions for the power industry including water pretreatment, cooling tower makeup water treatment, and ultrafiltration pretreatment to reverse osmosis, guaranteeing SDIs less than 3. ISO 9001:2008 certified and turnkey experienced, WesTech stands ready to meet deadlines and assure minimal downtime with focused service.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Gas monitoring for power generation applications

    Thermal power generation involves the combustion of a fuel to raise steam and drive a turbine to produce electricity. AMETEK Land provides the high-performance temperature measurements, emissions monitoring and safety systems demanded by this industry. High-accuracy measurements of temperature and flue gas composition are essential in optimising the combustion process, regardless of fuel used. Our instruments also help control pollution, and provide essential safety monitoring. With more than 60 years’...

    By AMETEK Land based in Dronfield, UNITED KINGDOM.

  • Premium

    Hand Held Analyzer for Measuring Combustion Efficiency & Emissions from a Sugar Mill as a Cogeneration Process

    For many years, sugar mills have burned bagasse, the fibrous byproduct of the processing of sugarcane, using special boilers that produce the steam needed to help break down the sugar cane. As the cost of powering this equipment by burning fossil fuels has steadily risen, the use of biofuel cogeneration as a source of power production has become more prevalent. Many sugar mills have updated their bagasse-fired boilers and linked them to generators that produce electricity used to power the mill’s operations...

    By E Instruments International, LLC based in Langhorne, PENNSYLVANIA (USA).

  • Premium

    Piping & ducting solutions for the power generation industry

    The generation and distribution of electricity consists of processes such as power stations, power transmission, electricity distribution and electricity retailing. PROCO Products has an inventory of check valves and expansion joints that are suitable for power generation industries, and can handle the stresses and pressures that are a normal part of the process. PROCO operates worldwide, and maintains one of the largest product inventories in North America.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA).

  • On-demand renewable energy to assist solar/ wind microgrids

    Our Power Pallet biomass gasifier genset, when used with the grid-tie module, can be integrated with an existing 3-phase AC microgrid that includes intermittent electrical sources such as solar panels or small wind turbines.

    By All Power Labs based in Berkeley, CALIFORNIA (USA).

  • DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN DIESEL FUEL OR DOMESTIC HEATING FUEL BY MID-IR SPECTROSCOPY

    Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN 14078:2014. Lumex Instruments provides user-friendly analytical...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • We Manufacture and Distribute Filters to the Energy Industry

    Maintain efficiency and protection with our wide range of filters which are designed to reduce manual cleaning and maintenance of your equipment. As a leading manufacturer and knowledge of the Power generation industry, we are able to offer solutions for

    By The Filter Company based in Nottingham, UNITED KINGDOM.

  • Solutions for power generation infrastructure sector

    As the owner-operator of power generation facilities, your plants and supporting infrastructure are critical to your success. Our solutions span the entire asset lifecycle from design through construction and into operations. Coordinate capital projects and revamps, whether managed directly or through contractors, with solutions for multi-discipline design and analysis and project collaboration. You will bring new plants into production more quickly and manage revamps with confidence.

    By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA).

  • Bioremediation solutions for power distribution industry

    Despite advances in technology, large oil-filled transformers are still the major component of the electric transmission substation. Many have been in service for years. One issue with these aging transformers is oil leaks. Even slight leaks, creating stains down the sides of transformers and oil circuit breakers, need to be addressed without outage. A bio-cleaner like iSorb is an ideal solution in that it doesn’t require water, sticks to vertical surfaces, and gets into corners and other tight spaces.

    By Beyond Environmental based in Geneva, ILLINOIS (USA).

  • Energy storage solution for solar self consumption sector

    In markets with high electricity rates, such as e.g. Germany, Hawaii or Australia, it can be economical to deploy energy storage systems to store the generated photovoltaic (PV) production for usage in the evening hours. As a grid tied PCS, Eguana`s products can seamlessly charge and discharge the battery, deliver power to the grid and supply critical loads. Unlike other battery inverters, Eguana`s PCS can supply the base loads continuously from the battery system, even during peak consumption times, while...

    By Eguana Technologies based in Calgary, ALBERTA (CANADA).

  • Aluminium-Air Technology for Electric Transportation

    Passenger cars can now run with zero emission while not compromising convenience. Phinergy powered cars offer a similar range to gas powered cars, and they only take five minutes to reload.

    By Phinergy based in Lod, , ISRAEL.

  • Solar Powered Home UPS

    The battery charging is done through the solar panel connected to reduce the energy used from grid power and to save the electricity bills. It increases battery life because of ripple free charging from solar panel.Complete logging and monitoring of Solar (optional) The system monitors the solar energy generated from the panels and stores the cumulative KWH generated. Monitoring through communication

    By Su-Kam Power Systems Ltd. based in Gurgaon, INDIA.

  • Environmental technology for power plants industry

    Körting condensers, steam jet and water jet vacuum ejectors are established components in steam power plants. There have been innovative developments over the past decades and continously upgraded aggregates to lower energy consumption by optimising heat revovery in power stations.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Heat transfer products solutions for the power generation industry

    Combining highly-experienced industry experts and a state-of-the-art research center, EVAPCO is constantly developing next generation technology for wet cooling tower systems, dry air-cooled steam condensing, and hybrid systems.

    By Evapco Inc. based in Westminster, MARYLAND (USA).

  • Fabrication solutions for the wind energy industry

    Modern wind turbines include a variety of components from BRÜCK. Our products are found in the power transmission in the form of bearings, flanges, gear and generator parts as well as in the pitch and gondola housing. Due to our vast depth in manufacturing and the enormous production capacity, we can cover the usual in the wind power industry requirements and high demands in the situation. Many global players in the wind energy sector benefit from BRÜCK proposed solutions for structural design of...

    By BRÜCK GmbH based in Saarbrücken-Ensheim, GERMANY.

  • Solutions to electric and gas utilities industry

    As the owner-operator of an electric and gas transmission and distribution network, you need to plan, design, manage, and operate your utility infrastructure. Whether your focus is electric and gas distribution networks, transmission networks, or electric substations, you can benefit from Bentley’s comprehensive solutions for utilities infrastructure. We can help you meet the challenges of expanding customer expectations, increasing demand, and growing compliance requirements.

    By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA).

  • Offering localized atmospheric and solar radiation output in order to model & manage energy use for energy sector

    Energy providers, engineers, universities and labs use Weather Analytics’ localized atmospheric and solar radiation output in order to model and manage energy use and consumption within buildings and profile new renewable-energy sites. Weather Analytics provides solution-ready, statistically stable climate data, including hard-to-find variables. We provide global geographic coverage and easy access to comprehensive climate intelligence, including on demand Typical Meteorological Year (TMY) and Actual Meteorological...

    By Weather Analytics based in Bethesda, MARYLAND (USA).

  • Process design & engineering services for power sector

    Each Power Plant is unique in its own way based on feed material, capacity and power output. Proxion Process provides services that are carefully tailored to meet a plant specification and requirement. From expert consultant services to technology to comprehensive project management, field service and technical support, Proxion Process offer comprehensive safe, reliable and cost-effective solution. Our aim is to improve plant availability, productivity and competitiveness.

    By Proxion Process based in Manchester, UNITED KINGDOM.

  • Optimized solutions for the power industry

    Preventive maintenance: extend the life of critical machine parts by as much as 500%. Castolin Eutectic is your resource for protection, wear and joining solutions. We believe in working with our customers to find the best answers to their problems. As the wear problem expert, we can provide solutions for: manufacture of new finished and semi-finished wear parts, repair of broken parts, rebuilding of worn parts, protection against wear and corrosion, choice of fusion technologies and much more. Our expertise is...

    By Castolin Eutectic based in St-Sulpice, SWITZERLAND.

  • Hydrogen solutions for power-to-gas sector

    In 2012, GP JOULE developed the power gap filler system to compensate for load fluctuations in the grid resulting from variations in the supply of wind and solar energy. PEM electrolysers convert excess green energy into hydrogen, which can be stored and fed back into the grid as required via a biogas-fired block-type thermal power station. This makes it possible to optimally integrate renewable energies into the electrical grid and offset and compensate for a lack of energy on days when there is little wind or...

    By H-Tec Systems GmbH based in Lübeck, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you