Power Distribution equipment for Power Distribution

Delta-T - Model ES2-05 - Solar Energy Flux Sensor (5m cable).

By Delta-T Devices Ltd. based in Cambridge, UNITED KINGDOM. from Solar Energy Flux Sensor Product line

The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor space.The ...

By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from High Voltage Electrode Steam Boiler Product line

Incorporates the proven overrunning design in a totally enclosed package. Designed for power transmission operations, this clutch is totally contained in a stationary housing for constant protection from hostile environments or wash-downs.

By The Hilliard Corporation - Star Systems Filtration Division based in Elmira, NEW YORK (USA). from Enclosed Overrunning Clutch Product line

Friction Torque Limiters and Couplings are designed to slip during a torque overload, while still transmitting the adjusted torque. They provide dependable solutions to the problems of torque control and overload protection in power transmission equipment.

By The Hilliard Corporation - Star Systems Filtration Division based in Elmira, NEW YORK (USA). from Slip Clutch Friction Torque Limiter Clutches Product line

The KW3 is the smallest turbine in the Kingspan Wind range. It is ideally suited for remote access sites, small domestic properties, telecoms and off-grid applications. KW3’s intelligent design ensures consistently high performance in all wind speeds.

By Kingspan Water & Energy based in Co. Armagh, NORTHERN IRELAND. from Offgrid Power Solutions Product line

The Hilliard Linkless Centrifugal is unique within its design. The combination of a dowel pin system and the symmetrical spring design allow for long life and provide an economical solution to meet your power transmission needs.

By The Hilliard Corporation - Star Systems Filtration Division based in Elmira, NEW YORK (USA). from Linkless Centrifugal Clutches Product line

SINEAX DM5S and SINEAX DM5F are free-programmable universal measurement devices for heavy-current systems: Classical high-accuracy transducer, suited for monitoring tasks and retrofit applications in energy distribution and industry.

By Camille Bauer Metrawatt AG based in Wohlen, SWITZERLAND. from Free-Programmable Universal Measurement Devices Product line

Gas engines are well suited to acting in island mode operation as a captive power plant. Island mode operation relates to those power plants that operate in isolation from the national or local electricity distribution network.

By Clarke Energy based in Liverpool, UNITED KINGDOM. from Island Mode Operation Captive Power Plant Product line

The MODBUS 485 RTU converter called 'MC-20' is a digital signal conditioner to convert the Voltage output of a solar radiation sensor, PT-100 or 10kΩ NTC temperature sensor into a MODBUS 485 RTU output. The converter can be used with all passive EKO radiometers or any other mV sensor to be connected to data loggers or inverters with a MODBUS ...

By EKO Instruments based in San Jose, CALIFORNIA (USA). from Signal Converter Product line

One or two-channel barrier for the safe separation of 4...20 mA standard signal circuits. The RB223 passive barrier can be used to galvanically isolate active signal circuits (0 to 20 mA) in three applications: Transmission from non-Ex to Ex areas e.g for active adjusters, controllers or indicators, Transmission from Ex to non-Ex areas for ...

By Endress Hauser AG based in Reinach, SWITZERLAND. from Loop Powered Passive Barrier Product line

The MC-11 is a 4-20mA digital signal conditioner to convert the Voltage output of a solar radiation sensor into a 4-20mA current output. The converter can be used with all passive EKO radiometers or any other mV sensor to be connected to dataloggers or inverters with a 4-20mA input channel. By using the signal conditioner, the sensor cable can be ...

By EKO Instruments based in San Jose, CALIFORNIA (USA). from Digital Signal Converter Product line

Demand for distributed power is growing at a fast pace. Distributed Power solutions furnish power right where you are, with fewer channelling and distribution losses. The 616 Genset goes where you need it – on or off the grid, in remote locations, and even under the most demanding operating conditions, providing you with reliable power at ...

By Clarke Energy based in Liverpool, UNITED KINGDOM. from High Efficiency Diesel Gensets Product line

Electricity peaking stations,  also called peak-lopping plants, are power plants designed to help balance the fluctuating power requirements of the electricity grid. Clarke Energy is able to offer a range of rapid response gas-fuelled power stations. These plants are ideally suited to peaking reserve, power and grid support applications.

By Clarke Energy based in Liverpool, UNITED KINGDOM. from Electricity Peaking Stations Product line

Cogeneration (cogen) through combined heat and power (CHP) is the simultaneous production of electricity with the recovery and utilisation heat. Cogeneration is a highly efficient form of energy conversion and it can achieve primary energy savings of approximately 40% by compared to the separate purchase of electricity from the national ...

By Clarke Energy based in Liverpool, UNITED KINGDOM. from Cogeneration / Combined Heat & Power Systems (CHP) Product line

In those areas not serviced by a main electricity grid, locally generated electricity is ideally suited as a cost-effective way of meeting the local electricity demand while reducing significant network installation or upgrade costs.  Through supply of energy directly at the load with a captive power plant, it is also possible to reduce or ...

By Clarke Energy based in Liverpool, UNITED KINGDOM. from Remote Combined Heat and Power Generation Product line

The Rotork Advanced Valve Remote Control System starts with the self-contained micro power pack E-ACT-C type electro-hydraulic actuator with integral electronic control unit), and goes up to the “I/O Control Cabinet” which contains main and backup communication cards, power distribution, serial interface and a touchscreen panel for ...

By Rotork plc based in Bath, UNITED KINGDOM. from Advanced Valve Remote Control System (VRCS) Product line

Wanji designs and manufactures El Lamination Power Transformer to meet the demands of different power, insulation and mounting under using various international standards of bobbins. This series of transformers are relatively economic and easy mounting with wide application.

By Ningbo Wanjl Electronics Science & Technology Co., Ltd. based in Cixl City, CHINA. from Power Supply Xfmr Product line

To complement our range of load banks and also serve the international temporary power generation sector, Crestchic manufacturers a range of containerised step-up/step-down transformers. The multi-tap transformers range from 2000kVA to 8000kVA, with voltage up from 600v to 34.6kV.

By Crestchic Ltd. based in Burton-on-Trent, UNITED KINGDOM.

L-type Control Center is the product which enables the provision of saving space and low price by making the best use of customer’s voice and pursuing the thorough rationalization for the purpose of control and protection of motor and the other load in the low-voltage distribution system.

By Togami Electric Mfg Co. Ltd based in Saga, JAPAN. from Low- Voltage Motor Control Center Product line

One of the basic principles of our highly developed civilization is reliable and inexpensive distribution of energy and, at the same time, the responsible and wise use of resources. For decades, self-operated regulators, which do not require auxiliary power to operate, have been used on air, steam and various other heating media in local and ...

By SAMSON AG based in Frankfurt am Main, GERMANY.