Power Substations Articles

  • Station Post Insulator

    We offer different kinds of Station Post Insulator for Substation, such as Circuit Breaker (CB), Post Insulator, Disconnector, Potential Transformer (PT), Surge Arrester, etc. Contact us get more details about Station Post Insulator, such as TDS, Application Method, OEM etc. We can supply different type of ...

  • Slot Button Type Silicone Rubber Busbar Joint Box

    The electrical junction box with busbar is a new type bus bar insulation cover, it is fabricated with high-quality raw materials in our state-of-the-art manufacturing unit. Silicone rubber ...

  • RTV High Voltage Insulator Coating

    Anti-pollution Flashover Coating (rtv insulator coating) High Voltage Insulator Coatings (HVIC)   To prevent the electrical equipment from pollution flashover in humid climate; Free of surface maintenance and cleaning after coated. Features of RTV High Voltage Insulator Coating: 1. ...

  • Multifunctional Insulator Cleaning Agent RS-10

    Multifunctional Insulator Cleaning Agent (RS-10) is mainly used for eradicating dirt, dust and contaminations on surface of the power equipment, especially clean that which surface was heavily polluted. After cleaning, RS-10 can significantly enhance the adhesion between the RTV coatings and the surface of insulator. The Advantages of Multifunctional Insulator Cleaning Agent RS-10:Remove ...

  • BEST Grounding Module

    Performance and characteristics of BEST grounding module: The low-resistance grounding module is a non-metallic material-based grounding body composed of non-metallic minerals with good conductivity and chemical stability, metal ground rods, electrolytes and humectants.   Ground Module performance and ...

  • Hollow & Bushing Insulator

    We offer different kinds of Hollow & Bushing Insulator for Substation, such as Circuit Breaker (CB), GIS, Post Insulator, Disconnector, Potential Transformer (PT), Surge Arrester, etc. Contact us get more details about Hollow & Bushing Insulator, such as TDS, Application Method, OEM etc.We can supply different type of Hollow & Bushing Insulator, also customer ...

  • High Voltage Insulator Coating Series

    High Voltage Insulator Coating (HVIC) is used on excessive voltage insulators to forestall flashover and arcing, particular in severely contaminated environments. Following the following 2 tips, you will get good results: Clean all surfaces of dust, grease and wax & Check temperature and humidity when applying. ...

  • Enhanced Anti-pollution Flashover Coating RTV-II

    A functional insulator coating to protect insulators in pollution area, such as industrial area, coastal area and other extreme environmental conditions, also can be used in normal environmental conditions. RTV-II/ PRTV is a one part and new type Room Temperature Vulcanizing  ...

  • Busbar Insulation Coating

    The silicone rubber insulation coating is made from special silicone rubber, high-performance material and other polymers by polymer blending technology. Its basic structural unit is silicon - oxygen chain while its side chain is connected by silicone with another organic radical group. Therefore, this structure makes the coating well combine the properties of both organic and inorganic compound. ...

  • Shanghai Wanggang Substation Case Study

    Shanghai Wanggang substation is a 220kV substation located at Pudong district, Shanghai. The substation is managed by Zhangqiao dispatching center. The substation has two (2) 180,000 kVA transformers, four (4) incoming supply lines of 220kV and nineteen (19) outgoing feeders of 35 ...

  • Guangdong Chaoyang Substation Case Study

    Guangdong Chaoyang substation is located at Shantou, Guangdong which covers voltage level of 220kV, 110 kV and 10 kV. The substation has two (2) 240,000 kVA transformers, four (4) incoming supply lines of 220kV, eleven (11) outgoing feeders of 110 kV and twenty (20) outgoing feeders of 10 ...

  • Aloha Solar Case Study

    Altus Power America acquired a Tier 3 Feed-In Tariff (FIT) project and needed to have it rapidly built to meet the deadline for the power purchase agreement’s guaranteed completion date. The project included upgrading a substation. REC Solar built the entire 5 MW (AC) system plus substation in 5 months. The energy from the project is being purchased by Hawaiian Electric Company (HECO) on a ...


    By REC Solar

  • VanTran Builds for Midstream User in Port Arthur, TX!

    Two weeks ago these two substation transformers left our factory for Port Arthur, TX. The 1500 kVA was built with a Neutral Grounding Resistor and the 500 kVA with a High Resistance Ground Pulsing Resistor with Ammeter, as well as numerous other accessories on each including NEMA 4X control cabinets, Nitrogen Preservation Systems, and Galvanized Rigid Conduit. Built for midstream provider Howard ...


    By VanTran Industries, Inc

  • VanTran Replaces Old Transformers to Exact Specifications

    Check out these 2500 kVA Substation Transformers that left our factory earlier this week! Manufactured for a Polyurethane chemical producer in Louisiana, these transformers were built as direct replacements for two units the customer had on site. Given a strict delivery date of November 1, and strict dimensions to maintain, VanTran accepted the challenge and built both units to precise retrofit ...


    By VanTran Industries, Inc

  • 5000 kVA Multi-Tap Substation: A VanTran Signature Product!

    A VanTran signature product, the last week in September, we had a 5000 kVA multi-tap substation transformer leaving our facility. Earlier this summer, when power lines were accidentally cut on the coast of North Carolina, one of our loyal rental power customers supplied a VanTran Multi-Tap Substation they had in their rental fleet to help assist in getting power back up and running. Because the ...


    By VanTran Industries, Inc

  • White Paper: Energy Superhighway Will Be Crucial to Successful Delivery and Management of Energy Services

    Rrecent white paper from Navigant Research provides a far-reaching view of the connectivity needs of electric utilities, exploring approaches and technologies, with case studies of projects designed to develop an Energy Superhighway. Over the last decade, with the advent of smart grid technology, ...


    By Smart Grid Observer

  • Noor II and Noor III eye cost savings from site integration

    With similar timeframes and a shared site, the Noor II and Noor III CSP projects in Morocco’s Noor Ouarzazate Solar Complex are expected to gain from multiple synergies during both construction and operations, Badis Derradji, ACWA Power’s managing director for Morocco, told CSP Today. Parallel construction on the two projects is bringing considerable cost benefits, even though ...


    By New Energy Update

  • Japan - Floating to a Clean Energy Future

    A country struck by disaster harnesses the power of ocean winds to set sail for a brighter, greener future Nearly 16,000 people were killed when a 9.0 earthquake triggered a tsunami that crashed into the east coast of Japan five years ago. The 30 foot wall of cold, black water wiped out entire towns and villages and triggered one of the world's worst nuclear disasters. ...

  • Debbie Dooley: Making the Tea Party — and America — a little greener

    When you think of the Tea Party, the first thing that comes to mind probably isn’t renewable energy. Debbie Dooley, national coordinator of the Tea Party Patriots and founder of the Green Tea Coalition, is out ...


    By Ensia

  • Cooperation with micca - Case Study

    The Customer Seated in Vienna, Austria, the micca informationstechnologie gmbh is an expert for industrial metrology. micca is focusing on the fields of energy supply with a strong emphasis on metrology for electrical substations and high-voltage power lines. micca cooperates with a network of partners and in the technology field also has a close cooperation with the Austrian ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you