Only show results available in Virginia? Ok

Power Transformers equipment for Power Distribution

  • Solar Power Xfmr

    Since 2006, Wanji designs and produces high quality of Toroidal Transformers for Solar Power Industry with High efficiency, low inrush current and low noise characteristics which are popular in the market. We also make Reactor Inductor for Inverter of Solar Power with low loss and low noise.

  • POWER ONE - Model SPCU-IE - Solar Power Packs

    MPPT Charge Controller Inbuilt Isolation Transformer Cold Start Directly on solarPriority: Solar – Grid – Battery, Solar – Battery – Grid. Remote Monitoring.

    By Powerone Micro Systems Pvt. Ltd. based in Bangalore, INDIA.

  • Solar Controller

    The Solar charge Controller is control device which can control solar panel and transform solar energy into electricity then store to the battery bank. It can not only supply normal power for the areas with poor or even without electricity, like in the mountains, pastoral, border, costal island. But also can used as DC power of the Mobile ...

    By Boundless Glory Energy Co. Ltd based in Hong Kong, CHINA.

  • Redragon - Model TORS - Transformer Oil Regeneration System

    Regeneration systems typically remove the by-product of aging from used transformer oil. By-products that are known as secondary contamination are created as a result of natural aging of a transformer in service coupled with inadequate maintenance regimens. There are traditionally two approaches to the removal of these contaminants, either ...

    By Redragon Oil & Gas Systems International Inc. based in Ontario, ONTARIO (CANADA).

  • Flat Transformer Pads

    MacLean Highline manufactures pads for padmounted transformers made of fiberglass/polymer concrete for a durable, light-weight utility option that is superior to standard concrete transformer pads. Our flat transformer pads meet or exceed industry requirements for chemical, U.V., flammability, impact, and load bearing resistances (Western ...

    By MacLean Highline based in Fort Mill, SOUTH CAROLINA (USA). from Fiberglass Polymer Concrete Product line

  • Transformer Oil Pumps In-Line

    The transformer oil in-line pumps are integrated pump/motor elements within the same frame, of weatherproof construction, specifically for outdoor use and arranged for direct pipeline installation. The compact design saves space and allows for horizontal or vertical mounting. To allow for minimum thermo-syphonic resistance the pumps are designed ...

    By SPP Pumps Limited based in Theale Reading, UNITED KINGDOM. from Transformer Oil Pumps Product line

  • Transformer Oil Pumps Traction

    Traction pumps are used on Traction Transformers and Converters fitted to most types of electric train operating around the globe. The purpose of the pump is to increase the efficiency of the transformers and converter by force circulation of transformer oil around the transformer or converter.

    By SPP Pumps Limited based in Theale Reading, UNITED KINGDOM. from Transformer Oil Pumps Product line

  • ELiTE - Model HYD-SB-14 - Hydraulic Spreader Bars

    Many traditional hydraulic spreader bars are manufactured to suit one or two particular pipe lengths only. The ELiTE HYD-SB-14 is engineered for flexibility when confronted with handling numerous pipe lengths.Integrated telescope arms (four) “2 x active and 2 x stationary” allow the ELiTE HYD-SB-14 to lift pipes from 9000mm up to ...

    By Schoenbeck GmbH & Co. KG based in Nienstaedt, GERMANY. from Hydraulic Handling Technology Product line

  • Transformer oil purifying machine

    This model is for filtrating and purifying transformer oil series, dehydration and degassing, to filtrate out particles, residuals, etc.also serve as transformer oil filling on line as well as drying.

    By Oil Purifier Co based in Chongqing, CHINA.

  • Cast Resin Transformers

    The product is suitable for use with medium voltages, power ratings up to 25/30 MVA and insulation voltage up to 52 kV. The windings are made with various shapes of aluminum or copper conductor. Each manufacturing stage of the cast coils passes through automated process controls that enable a product with a uniform quality that tolerates the most ...

    By Trasfor S.A. based in Molinazzo di Monteggio, SWITZERLAND.

  • Model 0.5kVA to 7.0kVA - Single Phase off-grid PV inverter

    The InfluxGreen IGSCI-0.5kVA to 7.0kVA is an integrated system comprising of the solar charger, AC charger, inverter, AC bypass switch, transformer and battery options. The unit can be implemented in complement with the grid or as stand-alone implementation, suitable for applications whereby grid is not readily available. The IGSCI solution ...

    By InfluxGreen based in SINGAPORE.

  • JINRUN - Model DZJ Series - Nitrogen Hydrostatic (Transformer Oil) Vacuum Filling Machine

    Description:Mainly used for electric power, metallurgy, coal mine, etc., and electrification vacuum oil-replenishment for on-working oil-filling device, and vacuum oil-filling or replenishment for after-examination and repair oil-filling device, and especially for filling or replenishing oil for under 220kv oil-immersed transformer and metal ...

    By Chongqing Jinrun Machinery Electron Co.,Ltd based in Chongqing, CHINA.

  • Air-Insulated Dry-Type Transformers

    Air-insulated dry-type transformers up to a 10 MVA power level and a voltage level of 36 kV.

    By J. Schneider Elektrotechnik GmbH based in Offenburg, GERMANY. from Transformers Product line

  • Transformers Station Concepts

    As no two transformer stations are alike, we will support you with advice concerning the ideal individual configuration for you. As opposed to most of our competitors or grid operators, we don't use off-the-shelf transformers but exclusively employ custom transformers specifically designed and built for individual power generation systems. In ...

    By M. Münch Elektrotechnik GmbH & Co. KG based in Weißenbrunn, GERMANY.

  • Series ZY Single-Stage Vacuum Insulating Oil Purifier

    Application: This machine is special for purifying various of insulating oils including unqualified transformer oil, mutual inductor oil and circuit breaker oil etc. It is widely applied to areas of power station, transformer substation, railway, petroleum, chemical and metallurgy. Also it is the best choice for filling oil into power equipment ...

    By Chongqing Acc Oil Purifier Manufacture Co.,Ltd based in Chongqing, CHINA.

  • Modulobloc - Transformers

    A complete range of equipement to carry out absence of voltage tests avalaible on request, conforming to recommended NFC 17200 standards.  Connection accessories routinely delivered with each transformer. Voltage adjustment tap changers of +5 et +7.5 % provided to transformers from 16 kVA and to the three-phase transformers of all power ...

    By Augier SAS based in Carros, FRANCE. from Transformers Product line

  • HVDC Converter Transformers

    XD|GE has developed the HVDC converter transformer designs up to the maximum ±800kV voltage level and has produced a large number of HVDC converter transformers. These have been developed to support projects from ±50kV HVDC back-to-back converter stations up to ±800kV HVDC transmission projects. XD|GE has the largest ...

    By GE Digital Energy based in Atlanta, GEORGIA (US) (USA). from Transformers Product line

  • Fire and Explosion Retardant Walls

    For electrical transformers according to standard NF C 13-200, oil rigs, nuclear facilities, etc.

    By GMT International based in Avignon, FRANCE. from Fire Extinguishing Systems Product line

  • Model S11 series - Oil Filled Transformers

    The S11 transformer is a hermetically sealed oil-filled distribution transformer, based on a silicon steel sheet step-lap core transformer and has low voltage winding and high voltage winding based of copper wire. The S11 is ideal as a distribution transformer feeding in power grid mains supply up to 36kV for production, mining, oil exploration ...

    By Sunrise Power Transformers GmbH based in Hamburg, GERMANY. from Transformers - Oil Filled Transformers Product line

  • High-performance Blade Design

    The rotor is the first phase of the energy transformation process from kinetic wind energy into mechanical torque, and as such is where investment in technology should be maximised. Aerodynamics is overlooked by many wind turbine designers because they do not understand what is possible; as such they continue to use out-dated technology and design ...

    By Anakata Wind Power Resources Ltd based in Carencero, LOUISIANA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you