Power Transformers Equipment For Power Distribution In Texas
-
Manufactured by Soltex, Inc.based in USA
Soltex capacitor insulating fluids offer excellent physical and chemical dielectric capacity for use in capacitors. They provide high resistance to oxidation and corrosion and offer an extensive temperature range for great protection in ...
-
Manufactured by VanTran Industries, Incbased in USA
VanTran is the world leader in the manufacture of rental duty transformers. Our specially designed units are manufactured specifically to handle the rugged conditions inherent to the rental industry. The core and coils have extra bracing, the windings are made heavier, we have optional forklift pockets and protective cages, heavy duty tap changers and switches, everything about this unit was ...
-
Manufactured by Larson Electronics LLCbased in USA
The Larson Electronics MGL25-8C-480-120V-GFI Temporary Power Distribution System converts 480 VAC three phase electrical current to single phase 120V AC and 240V AC 60hz. This power distribution system provides operators the ability to safely tap into and distribute 480VAC power from a variety of sources including generators and direct grid power. This portable substation is suitable for outdoor ...
-
Manufactured by AZZ Inc.based in USA
Around the world, AZZ’s isolated phase bus systems are found in a wide range of critical applications that demand the highest degree of reliability. For decades, plants and facilities have counted on AZZ’s knowledge and expertise in custom-designed solutions to deliver unmatched performance in isolated phase bus ...
-
Manufactured by AmeriMex Motor & Controls LLC.based in USA
AmeriMex has transformers for almost every type of application. We ensure power transformers deliver energy to you safely and efficiently. Our experts will help you select a transformer to meet your individual factors, such as voltage, power, climate, system topography, and sound level. AmeriMex provides the best solution to meet your needs at the maximum quality and best ...
-
Manufactured by VanTran Industries, Incbased in USA
VanTran pole mount transformers feature sealed tank construction and are designed and built one at a time for your specific application. As a result, VanTran can manufacture custom units with an endless array of voltages, frequencies, and configuration variations. Our pole mounts are available in single phase and three phase, as well as auto-transformer configurations. VanTran pole mount ...
-
Manufactured by Cordyne Inc.based in USA
ES4 & CS4 Series Are heavy-duty enclosure which is painted steel with ANSI 61 gray powder coating. All components are mounted to the enclosure’s back pan. The enclosure is rated for NEMA 4, 3R, 13, 12, 1 applications. NEMA Rated Non-Reversing motor starter with three leg protection overload heaters (included standard-sized to-rated chart amps). Reset pushbutton is standard on all units. ...
-
Manufactured by HVPDbased in UNITED KINGDOM
HVPD's range of wideband, High Frequency Current Transformer (HFCT) sensors are used to measure partial discharge in power cables and in remotely connected HV plant such as rotating HV machines and transformers. The sensors are attached around the cable's earth connections in the switchgear, rotating machine or transformer's HV cable terminal ...
-
Manufactured by Microflex, LLCbased in USA
MicroLink-HM+ is a HART® protocol modem to USB/RS-485/RS-232 serial interface. In addition to functioning as a HART protocol modem, it can also be configured to continuously poll HART devices, filling Modbus registers with device values without any additional HART software. Modbus registers can be read using standard Modbus-RTU command 3 from the USB and/or RS-485/RS-232 serial ports. ...
-
Manufactured by HVPDbased in UNITED KINGDOM
The World's First On-line Partial Discharge Handheld Test Unit with an Asset Management Application – the OLPD Manager ...
-
Manufactured by HVPDbased in UNITED KINGDOM
The HVPD Kronos® Spot Tester is a brand new portable diagnostic test unit for detecting On-line Partial Discharge (PD) in all types of in-service plant, including cables, switchgear, transformers and rotating machines operating at 3.3 kV and above. ...
-
Manufactured by VanTran Industries, Incbased in USA
VanTran Substation transformers can be designed with an array of configuration options in either top or side entry variations, such as box throats, partial and full length air terminal chambers, and close coupling flanges. All VanTran units can be manufactured from mild steel or 304 and 316 Stainless Steel (including radiators). We manufacture units up to 10,000 kVA (10 mVA) and 34,500 ...
-
Manufactured by Oil Filtration Systemsbased in USA
The proper treatment and upgrading of the insulating fluid will result in the improvement of the properties of the entire insulating media of power ...
-
Manufactured by HVPDbased in UNITED KINGDOM
The Transient Earth Voltage (TEV) sensor is a capacitive probe designed to detect local, high‑frequency PD pulses in switchgear, cable sealing ends, machine cable boxes, transformers and other plant. The sensor is very flexible, and can be installed either inside or outside the plant under test. HVPD supply both indoor and outdoor versions of the TEV ...
-
Manufactured by Amgis, LLCbased in USA
In most electrical applications, you need a transformer to provide safety isolation and/or step up or step down a voltage. A toroidal industrial power transformer is the ideal solution for most applications because it’s easier to mount, smaller, lighter and more efficient than a traditional laminated ...
-
Manufactured by VanTran Industries, Incbased in USA
Most of the transformers VanTran makes could be considered “special” or “custom.” Every unit we make is designed one at a time and built one at a time. We do not have “standard” designs that we “repackage” or “make work” in special applications. We have a full team of engineers and designers that work with our customers to make ...
-
Manufactured by Sentient Energy, Inc.based in USA
Sentient Energy’s UM3+ is an intelligent underground faulted circuit indicator and line sensor with substation-class measurement, computing and processing capabilities. The UM3+ is a powerful line sensor designed to be a platform for a set of applications. The UM3+ is an important element of Sentient Energy’s Grid Analytics System™, which consists of the MM3™ and ...
-
Manufactured by Energy Control Systems (ECS)based in USA
Xtreme J60 advanced design combines the benefits of lithium ion powered UPS and advanced surge suppression technology. Slim form factor (just 1.25”), wall mounting, and easy access receptacles make J60 ideal for mounting behind thin display screens in used in hotels, restaurants, hospitals, campuses, airports and other commercial areas. While J60’s compact design is appealing to the ...
-
Manufactured by VanTran Industries, Incbased in USA
VanTran Padmount transformers are available in single and three phase configurations and feature sealed tank construction with welded on covers. Our padmounts are available in sizes up to 10,000 kVA (10 mVA) and voltages up to 34,500 Delta (or 200 kV BIL) and feature high security, three point latching, pad-lockable double door compartments with full length steel center partitions and penta-head ...
-
Manufactured by Cordyne Inc.based in USA
ESX-K & CSX-K Series features include an IEC contactor with adjustable thermal Overload (Class 10). The oversized control power transformer is optional. External machined flange joint design. Units are assembled, pre-wired, and ready to go. Integral Cast Mounting Feet. Units come standard with Hinged Covers. S.S. (316) Captive Quick Thread Cover Bolts (optional). Ground Lug Package. Steel ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you