Power Distribution Equipment

Based on the succesfull certified platform of the XANT M (100kW), we develloped a 330kW direct drive wind turbine. As the XANT M windturbine, the XANT L is available: -/ in a stand alone tower and a guy wired tower which allows a crane-less installation. -/ with an optional concrete-less foundation.

By XANT NV based in Brussels, BELGIUM.

The KW3 is the smallest turbine in the Kingspan Wind range. It is ideally suited for remote access sites, small domestic properties, telecoms and off-grid applications. KW3’s intelligent design ensures consistently high performance in all wind speeds.

By Kingspan Water & Energy based in Co. Armagh, NORTHERN IRELAND. from Offgrid Power Solutions Product line

Torque limiters and couplings are designed to slip during a torque overload, while still transmitting the adjusted torque. They provide dependable solutions to the problems of torque control and overload protection in power transmission equipment. These clutches include one or more friction discs mounted on an inner hub, a single nut adjustment to ...

By Hilliard Corporation based in Elmira, NEW YORK (USA). from Friction Torque Limiter Product line

Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. Dynamically ...

By Hilliard Corporation based in Elmira, NEW YORK (USA). from Pneumatic Start Assembly Product line

The SAP surge anticipator panel provides the interface between a customer supplied, system pressure switch and the Singer surge anticipating control valve. Together they provide protection against destructive pressure surges. The SAP panel energizes the control valve pilot solenoid on an abnormally low pressure reading and/or power failure to ...

By Singer Valve Inc. based in Surrey, BRITISH COLUMBIA (CANADA). from Surge Anticipator Panel (SAP) Product line

HILCO's staff of engineers is always willing to design a system for your particular needs. Call today with your specific application requirements.

By Hilliard Corporation based in Elmira, NEW YORK (USA). from Custom Filtration Systems Product line

HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize leakage. Rugged, precision-machined, straight body heavy wall steel tubing for body material—minimizes valve ...

By Hilliard Corporation based in Elmira, NEW YORK (USA). from Split Transfer Valve Product line

The Hilliard High-Speed Starter Overrunning Clutch Drive provides positive engagement and high torque on demand. Featuring a unique roller-ramp design, the clutch when engaged transmits power via the precision-machined cam and roller assembly connected to the input shaft. A ball bearing at each end of the roll cage supports and aligns the cam in ...

By Hilliard Corporation based in Elmira, NEW YORK (USA). from High-Speed Starter Overrrunning Clutch Drive Product line

The ThermAsset®2 is a much sought after addition to LumaSense's Luxtron product line, offering a primary controller to monitor hot spots, control cooling, and protection at a cost that is attractive to the apparatus engineers and system operators.

By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA). from Effective Fiber Optic Hot Spot Monitor and Controller for Power Transformers Product line

Variable and fixed displacement types. SAE mounting, spline shafts. Typical operating pressures up to 5000 psig (350 bar). High-speed operation. High starting torque efficiency. Different sizes for different applications. Suitable for open and closed loop circuits. Supply includes overrunning clutch.

By Hilliard Corporation based in Elmira, NEW YORK (USA). from Hydraulic Clutch Assembly Product line

HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize leakage. Rugged, precision-machined, straight body heavy wall steel tubing for body material—minimizes valve ...

By Hilliard Corporation based in Elmira, NEW YORK (USA). from Six-Port Standard Transfer Valves Product line

The Model 100 Continuum Ignitor utilizes a high voltage electric arc to ignite a combustible air/gas mixture. This arc typically occurs every 20 seconds for a two second duration (timing is adjustable). The Continuum provides a spark inside a ‘slipstream’ chamber that diverts a portion of the waste gas to create a combustible air/gas ...

By AEREON based in Austin, TEXAS (USA). from Continuum Ignitor Product line

Hilliard Electric Brakes provide positive stopping and reliable holding of rotating devices on demand-every time. Spring engaged when current is interrupted and electromagnetically relased when voltage is applied, these brakes are designed for maximum flexibility and long, dependable service. Each brake has an easy-to-adjust wear bolt to ...

By Hilliard Corporation based in Elmira, NEW YORK (USA). from Spring Applied / Electric Released Brakes Product line

Delta-T - Model ES2-05 - Solar Energy Flux Sensor (5m cable).

By Delta-T Devices Ltd. based in Cambridge, UNITED KINGDOM. from Solar Energy Flux Sensor Product line

Saflow (DS) and Saflow D (DD) Cartridges withstand cold starts and high pressure differentials. These specially designed stacked disc cartridges provide protection at high pressure differentials brought on by cold starts and high viscosities. The stacked cellulose paper discs with labyrinth oil channels also provide depth filtration and high ...

By Hilliard Corporation based in Elmira, NEW YORK (USA). from Stacked Disc Cartridges Product line

The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor space.The ...

By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from High Voltage Electrode Steam Boiler Product line

The SCP-C5 continuous centrifuge has the following main features: stainless steel, vertical axis concept; devices to control formation of magma or syrup at the required Bx, Qz; new design of bell distributor for better vibration damping; two different lubrication system: oil pressure and grease only for the levels of roll-and ball-bearings; ...

By Pieralisi Group based in Jesi, ITALY. from Continuous Centrifuge Product line

24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of rotation.

By Hilliard Corporation based in Elmira, NEW YORK (USA). from Electric Start Assembly Product line

The EC-7VAR Power Energy Data Logger is specifically designed to monitor one, two or three current channels, as well as one, two or three voltage channels. It allows you to monitor the loading and energy consumption of the installation. Power Factor recorded is the phase angle between L1 and A1. Amp ranges are selectable from 400 or 3000 AAC. Why ...

By CAS DataLoggers based in Chesterland, OHIO (USA).

The M-24 is a direct drive 95kW windturbine Class IIIA = low average windspeed and windgusts up to 50m/s Fits in only one 40 foot container Tower is available in a free standing tower and guy wired tower which has a crane-less installation Concrete-less foundation available Cold Climate package including blade heating available Hot climate package ...

By XANT NV based in Brussels, BELGIUM.