Power Distribution Equipment Available In Myanmar
-
ShowcaseManufactured by Avtron Power Solutionsbased in USA
The 2500 is “the load bank of choice”, as they provide the right mix of high capacity, transportability, ease of use, and reliable Avtron construction. ...
-
ShowcaseManufactured by Solar Turbines Incorporatedbased in USA
Solar Mobile Turbomachinery (SMT) is the best solution for oil field power, remote power and trailer power in the industry, and in emergencies such as natural disasters where quick power is essential. The single trailer design is a complete mobile power plant with wide fuel composition flexibility. This solution is based on the 5.7 MWe Taurus 60 gas turbine generator set – a proven industry ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is offered in 4 sizes to accommodate a ½", 1", 1-3/16", and ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Hilliard offers a Continuously Variable Transmission that is more advanced than any other belt drive system currently on the market. The Hilliard clutch system utilizes a tight belt which allows for seamless engine braking and belt protection at start up and during overload situations, to extend belt life. Hilliard’s CVT system is designed to fit a wide variety of clutch envelopes so no ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Hilliard supplies standard and custom brake caliper mounting kits and brackets for use with all Hilliard brake models. Fabricated of welded steel construction with painted finish, Hilliard mounting bracket models are available to accommodate from one to eight calipers per disc. Hilliard can also supply non-standard disc and hub sizes to meet your specific applications. ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Variable and fixed displacement types. SAE mounting, spline shafts. Typical operating pressures up to 5000 psig (350 bar). High-speed operation. High starting torque efficiency. Different sizes for different applications. Suitable for open and closed loop circuits. Supply includes overrunning ...
-
PremiumManufactured by Hilliard Corporationbased in USA
24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's UltraVolt US series is designed for commercial, military, industrial, and research ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
A Compact, Economical, Easy to Install, Low Power RF Platform. Compact, lightweight, and air-cooled, HiLight™ RF generators are ideal for low-power, on-board applications, suiting 13.56 MHz plasma and 1 or 2 MHz ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The MV3000 series features a wide output range for OEM and industrial applications, such as electron beam, ion beam, chemical purification systems, magnet drivers, and other 24 x 7 production ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Inferno Fury is an economical racing clutch designed for durability. The sprockets are heat treated steel and the hub is heat treated. The Fury is available with an oil impregnated bronze bushing, or a needle bearing. The Fury is a long lasting low maintenance design with some tunability. The Fury clutch can handle excessive heat and give you consistent torque all race season. The Fury clutch ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is offered in 4 sizes to accommodate a ½", 1", 1-3/16", and 1-1/2" thick ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Hilliard BBH4 power unit is suitable for brakes demanding pressures above 3,000 PSI. It includes on/off and ramped braking modes. The power units are highly customizable, allowing customers to specify component types for several items in the system, including the motor, electrical panel, RTD, and pressure transmitter. The unit includes an isolated hand pump specifically useful in power ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's Luxtron ThermAsset2 is designed to measure transformer winding hot spots in real time and activate control of the cooling system. Choice of two, four, six, or eight channels. Direct, accurate, and real-time transformer winding hot spot and temperature monitoring. Programmable setpoints and relays with individual LED alarm ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
All MV2000 power supplies are customized and built-to-order. They offer output voltages ranging from 20 to 300 V with a maximum output power of 2 kW in a compact 1U 19-inch rack-mountable ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's UltraVolt V series of regulated DC-to-DC converters provide high voltage power in a lightweight, small-footprint package that is ideal for biasing applications where PCB board space is ...
-
PremiumManufactured by Energy Systems & Design (ES&D)based in CANADA
New! Injection Molded housing with drip lip! In the 1970’s Paul Cunningham, owner and operator of Energy Systems & Design, had a need to power his off-grid house. He set off on a mission to create an efficient and reliable micro hydro machine. Utilizing a car alternator type micro hydro machine and the wheels he cast himself, he created the first machine. Through many hard-working ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s UltraVolt C series of regulated DC-to-DC supplies are designed for capacitor charging applications that demand fast charging rates with limited voltage ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Multi-Output Power System for Multi-Chamber Power Delivery in Solar PV Manufacturing. The Ascent MS supports up to five independent chambers of PERC PECVD deposition processes in a single unit. This optimizes power delivery, enables independent programming, and simplifies deposition machine design to help you lower capital costs and increase ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you