GE Power Distribution Equipment
-
based in USA
GE’s 1.85-87 wind turbine is designed for Class IIs winds, and offers an 11% increase in swept area and an extra 230 kW output at rated wind speed compared to the 1.6-82.5 turbine. The increase in blade swept area results in a 10% increase in Annual Energy Production (AEP) at 8.5 ...
-
based in USA
Introducing the J920 FleXtra Jenbacher with 49% el. efficiency 60Hz. GE proudly announces the J920 FleXtra Jenbacher 9.5 MW system for 60 Hz with best-in-class 49% el. efficiency for large gas engine power plants at APPA, Denver on June 16th. Whether you're seeking full power at high efficiency levels or a unit capable of short start-up times. GE's J920 FleXtra gas engine is an ideal, reliable ...
-
based in USA
GE’s 2.2-2.4MW, 107m rotor wind turbine is an advanced evolution of the 1.x series, providing a 35% increase in Annual Energy Production (AEP) over its predecessor, the 1.85-87 (at a 2.4 rating). Designed for medium wind speeds, the 2.2-2.4MW turbine provides a 51% increase in swept area with the 107m rotor, and an extra 350-450 kW output at rated wind speed compared to the 1.85-87 turbine, ...
-
Manufactured by GE Powerbased in USA
A single, economical solution for the dispatch needs of nearly every industry ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a fuel for a generator is an excellent way of reducing carbon dioxide ...
-
based in USA
GE’s 1.7-100/103 wind turbine offers a 47% increase in swept area when compared to GE’s 1.6-82.5 turbine, resulting in a 24% increase in Annual Energy Production (AEP) at 7.5 m/s. This increase in blade swept area allows greater energy capture and improved project economics for wind developers. The 1.7-100/103 uses GE’s proprietary 48.7-meter blade which has the same proven ...
-
Manufactured by GE Powerbased in USA
Our air-cooled generator systems install fast, integrate easily, and deliver the power needed with more uptime. These generators are the choice for power plant applications that demand simple, flexible operation. Prepackaged generator solutions arrive ready-to-install at site reducing project cycle time with increased ...
-
based in USA
The GE 1.85-82.5 is the turbine of choice for IEC class II winds, and provides over 7% more AEP than the 1.6-82.5 at 8.5 m/s. The 1.85-82.5 turbine is available in tower heights of both 80 and 65 meters. These tower sizes both provide flexible options for Class II wind sites,as well as higher energy capture in a variety of challenging ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Demand for distributed power is growing at a fast pace. Distributed Power solutions furnish power right where you are, with fewer channelling and distribution losses. The 616 Genset goes where you need it – on or off the grid, in remote locations, and even under the most demanding operating conditions, providing you with reliable power at lower fuel cost, extended equipment life and smaller ...
-
based in USA
Integrated full electric power and propulsion (IFEP) solutions provide the greatest flexibility in vessel layout, power scalability and maintainability. Without having a fixed mechanical drive shaft through the ship, powerful electric propulsion motors can be located around the vessel to help maximize available space and separation for improved survivability ...
-
based in USA
GE’s electric propulsion systems on-board electric power supplies and networks, energy management, automation, control, dynamic positioning and digital technologies work together seamlessly to supply a ship’s full power requirements, including energy-efficient propulsion, service loads and energy-intense operating ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you