Power Distribution Equipment In New Zealand
-
PremiumManufactured by KISTERSbased in GERMANY
An iBOX is the core of an hydrometeorological monitoring station. It combines data acquisition, data transmission and power management in a ready-to-be-deployed cabinet for outdoor installation. The electric cabinet housing (for either wall ort post mounting) of the iBOX includes an iRIS data logger, suitable power supply, surge protection, antenna, screw terminations and cable glands. The whole ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
For reliable continuous cooling. The essential advantage of our refrigeration units is that the cooling is carried out by means of water outside the transformer. This is to prevent the transformer from being damaged if leaks occur. The cooling systems can be connected to the gas insulated transformer directly and are optimally suited for continuous ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Electricity peaking stations, also called peak-lopping plants, are power plants designed to help balance the fluctuating power requirements of the electricity grid. Clarke Energy is able to offer a range of rapid response gas-fuelled power stations. These plants are ideally suited to peaking reserve, power and grid support ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
The spent byproducts of distilleries have historically been treated as waste. However, the liquid and solid wastes of the distillation industry have greater potential and can be sent to anaerobic digesters and converted into biogas. This biogas in turn can be turned into renewable electricity at high efficiency via GE Jenbacher gas ...
-
Distributed by Independent Power (NZ) Ltd.based in NEW ZEALAND
Solis-2G single phase grid-connect inverters are the latest products of Ginlong Technologies, and are suitable for both household and commercial/industrial single phase  PV solar power system installations. The quality of the previous models was utilized in the Solis-2G series with many new features ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Clarke Energy is a KOHLER company and distributes KOHLER generators in the South Pacific which are suitable for a wide range of applications. Our generators are designed and manufactured in the KOHLER facility in France with more than 50 years of product optimisation experience, available with a “plug-and-play” design philosophy for ease of installation. Dedicated KOHLER service and ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Using a combined heat and power (CHP) or cogeneration plant in a hospital is an ideal way of achieving improved energy efficiency and reduced carbon emissions. Its utilisation helps a hospital’s limited financial resources go further. Natural gas is a clean-burning low carbon emission fuel. A CHP plant facilitates the high efficiency use of this fuel, by recovering not only electricity but ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Combined heat and power (CHP), or cogeneration, offers a range of potential benefits for residential applications. Cogeneration systems are successfully applied in a wide range of residential applications. Gas engine cogeneration systems can provide significant financial savings on fuel costs used to provide electricity and heat. In some countries the government provides tax benefits to the owner ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Coal mine methane (CMM) is a type of gas present in active, working mine sites. This gas is extracted from the air in the coal mine helping improve safety and preventing uncontrolled release of methane to ...
-
Manufactured by BEPbased in NEW ZEALAND
This single pole, single throw switch turns one circuit on and off. Nominal Voltage is 6-36V DC with 175A continuous and 800A intermittent ratings, Has 3/8" brass terminal studs, Includes face plate which indicates position of the M284 switch, 3/4" mounting hole, up to 5/16" panel thickness, Compares to Cole Hersee part number ...
-
Manufactured by Windflow Technology Ltdbased in NEW ZEALAND
The 33-500 is Windflow's flagship turbine. With a rated power of 500 kilowatts (kW) and a rotor diameter of 33 meters, it is a turbine that can make your project on a high to medium wind site a financial success. There are more than one hundred 33-500 turbines in the world, and collectively they have accumulated over 600 turbine-years of operating history at more than 95% availability. The ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Trigeneration or combined cooling, heat and power (CCHP), is the process by which some of the heat produced by a cogeneration plant is used to generate chilled water for air conditioning or refrigeration. An absorption chiller is linked to the combined heat and power (CHP) to provide this functionality. Quadgeneration takes this process one step further with the addition of systems to purify ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Combined heat and power (CHP) or cogeneration has significant potential in the diary industry. Electricity and heat recovered from a gas engine captive power plant can be deployed for useful onsite us. Converting the heat into cooling via absorption chillers is called combined cooling heat and power or trigeneration, and can be deployed to support the dairy’s cooling ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Demand for distributed power is growing at a fast pace. Distributed Power solutions furnish power right where you are, with fewer channelling and distribution losses. The 616 Genset goes where you need it – on or off the grid, in remote locations, and even under the most demanding operating conditions, providing you with reliable power at lower fuel cost, extended equipment life and smaller ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Hot and tropical counties can pose challenges for the operation of the generator. If the generator exceeds certain temperature limits de-rating will occur. In order to overcome the challenge of high ambient temperatures the generator enclosure or container must be correctly engineered to ensure that the generator is adequately cooled. In addition to incorporation of enhanced ventilation systems ...
-
Manufactured by Briggs & Stratton Corporationbased in USA
Our dealer exclusive standby generator line comes with great features to help keep your household going. We provide a premium level of protection by offering a 6 year parts, labor and travel warranty, – the longest in the industry. The Fortress 10 kW1 Standby Generator System also comes equipped with an oil warmer for when temperatures start dropping below 30 degrees. Backup power is more ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Combined heat and power (CHP) or cogeneration has significant potential in the brewery industry. Electricity and heat recovered from a gas engine can be deployed at high efficiency for useful onsite use. This gives the ability to reduce operational costs and reduce carbon emissions. Converting the heat into cooling via absorption chillers is called combined cooling heat and power (CCHP) or ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Battery energy storage systems (BESS) play an essential role in integrating and accelerating renewable energy deployment. By helping to balance energy supply with demand, Energy storage greatly improves the efficiency of renewable sources and allow maximal renewable energy penetration into the energy network. Energy storage can provide support services to the electricity grid, or to an individual ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Cogeneration (cogen) through combined heat and power (CHP) is the simultaneous production of electricity with the recovery and utilisation heat. Cogeneration is a highly efficient form of energy conversion and it can achieve primary energy savings of approximately 40% by compared to the separate purchase of electricity from the national electricity grid and a gas boiler for onsite heating. ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
In those areas not serviced by a main electricity grid, locally generated electricity is ideally suited as a cost-effective way of meeting the local electricity demand while reducing significant network installation or upgrade costs. Through supply of energy directly at the load with a captive power plant, it is also possible to reduce or avoid altogether the transport and distribution losses. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you