Power Distribution Equipment In Qatar
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
The Inciner8 Autoloader is a British steel product made of the highest-grade steels and manufactured by our Queens Award Team, recognised for their innovation and manufacturing ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
The BTU meter RH33 is used in applications with liquid energy carriers. It calculates the thermal energy of water acc. to EN1434, glycol/water mixtures or other fluids such as thermal oils. Temperature sensor matching using calibrated temperature sensors is done in the device. Potential for cost savings can be shown by using the software available as an accessory. The device has a custody ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Excellent readable indication of a 4…20 mA signal on-site for a better process overview! The indicator shows the measured signal on the large, backlit display. An additional bar graph gives a quick process overview and a plain text field displays further information like the engineering unit or TAG. Limit value infringements are also signalized and an open collector can be switched. No ...
-
Manufactured by TESMEC S.p.Abased in ITALY
The machine is suitable to string one rope. The bull-wheel grooves are made of heat treated ...
-
Manufactured by Sama Sustainability & Renewable Energybased in QATAR
A charge controller limits the rate at which electric current is added to or drawn from electric batteries. It prevents overcharging and may protect against overvoltage, which can reduce battery performance or lifespan, and may pose a safety risk. It may also prevent completely draining ("deep discharging") a battery, or perform controlled discharges, depending on the battery technology, to ...
-
Manufactured by TESMEC S.p.Abased in ITALY
Hydraulic winch designed for tower erection, for stringing operations of low and medium voltage overhead lines and for any lifting work. The winch is provided with a capstan and a ...
-
Manufactured by TESMEC S.p.Abased in ITALY
The machine is suitable to string one rope or cable conductor with fibre-optical cables (OPGW). The bull-wheel grooves are made up of high resistance interchangeable nylon ...
-
Distributed by Mumar Businessbased in QATAR
LED Solar streetlight that is backed up by powerful Lithium battery with 2 nights of backup. Availbale in 30 & 40W with 100lm/W. Suitable for internal roads with 8-12m width. Also can be used for remote locations as its easy to be mounted on ...
-
Manufactured by Sama Sustainability & Renewable Energybased in QATAR
A power inverter, or inverter, is an electronic device or circuitry that changes direct current (DC) to alternating current (AC). The input voltage, output voltage and frequency, and overall power handling depend on the design of the specific device or circuitry. The inverter does not produce any power; the power is provided by the DC ...
-
Manufactured by TESMEC S.p.Abased in ITALY
Hydraulic winch designed for tower erection, for stringing operations of low and medium voltage overhead lines and for any lifting work. The winch is provided with a detachable ...
-
Manufactured by TESMEC S.p.Abased in ITALY
The machine is suitable to string one rope. The bull-wheel grooves are made of heat treated ...
-
Manufactured by TESMEC S.p.Abased in ITALY
The machine is suitable to string one rope or one conductor. The bull-wheel grooves are made up of high resistance interchangeable nylon sectors. The machine is completely electronically ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Cyclone Series Air-assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to eventually combine with the process gas, which passes through its own secondary riser and is distributed at the flare tip through a proprietary AEREON Starfire burner tip. Upon mixing at the flare ...
-
Manufactured by Spire Metering Technology, LLC.based in USA
The 103E is a DIN rail four wire three phase smart energy meter. It is a new addition to Spire Metering’s ePrime Series smart meter product family. It utilizes state-of-the-art technology within the electronic kWh metering industry. 103E offers all the measurement capabilities required to accurately monitor electricity consumption. All three phases can be monitored at the same ...
-
Manufactured by Muntersbased in USA
By installing an IceDry® dehumidifier inside the cold store a frost free cold store can now be a reality. An airlock is no longer needed. When IceDry is installed, accumulated ice and frost will gradually evaporate until the store is completely free from ice and frost. IceDry is the only dehumidifier that has been developed especially for installation inside a cold store. The tough, cold ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium (I.e. For burning of lighter gases). Utility flares therefore, do not require auxiliary gas streams or assist air; two mediums normally used to ...
-
Manufactured by Muntersbased in USA
The Breeze Fan is a High Volume Low Speed fan, engineered to circulate a vast amount of air, providing the most efficient air circulation movement for animal housing. The Breeze Fan works on a simple principle – creates slow, gentle breezes to lower the effective temperature during warm periods and to circulate the rising warm air downward to ground level during cold periods. In addition, ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas is further distributed at the flare tip through AEREON's proprietary Starfire burner, optimizing gas and air mixing. ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Model 250 Energex Pilot is a high alloy, stainless steel pilot which combines a high voltage electronic excitor and a high energy spark rod to provide rapid, reliable ignition. More importantly, the Energex pilot provides instantaneous re-ignition if the pilot should ever lose its flame. This pilot system uses a fuel gas line much like other standard pilots, however instead of a flame front ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Model 270 RETRAX is a high-tech, retractable, electronic pilot which meets the technical requirements of our clients. This advanced design allows the plant operators to lower the RETRAX pilots individually or all at once for ease of maintenance. Since the RETRAX can be lowered from grade, operators need not wait for a plant shut down to service the pilots. The Model 270 RETRAX allows ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you