Power Distribution Equipment In Saudi Arabia
-
ShowcaseManufactured by Solar Turbines Incorporatedbased in USA
Solar Mobile Turbomachinery (SMT) is the best solution for oil field power, remote power and trailer power in the industry, and in emergencies such as natural disasters where quick power is essential. The single trailer design is a complete mobile power plant with wide fuel composition flexibility. This solution is based on the 5.7 MWe Taurus 60 gas turbine generator set – a proven industry ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
DataPro, SonicPro and EnerPro surge arrestors – highly stressable and particularly adjusted to sensors and transmitters. Maximum operational safety at small ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
BSG 12, 32, 42 and BSG 20 Ex - for DataPro, SonicPro, EnerPro and IsoPro surge ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard BBH1 Power Unit is a base model that includes on/off and ramped braking modes. With integral manifold mounting and heavy duty pump with fail-safe design, many options are available to customize the system to the specific needs of the ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard MK1400 is an electromagnetic, fail safe caliper brake. Spring applied, electric released, it is suitable for holding duty and emergency for applications such as theatrical stage lifts, elevators and cranes. Alternative mounting arrangement: pin mounting, base mounting horizontal and base mounting angle. The MK1400 is capable of producing a maximum 1,400 LBF of braking force with up ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The A400 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The 400 requires a minimum disc diameter of 24" and is off ered in 2 sizes to accommodate a 1" and 1-1/2" thick disc. The design of ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard Auto-Lok Differential offers equal power transferred to both wheels on an axle regardless of traction, allowing positive back drive through both wheels. The self- contained unit locks and unlocks automatically providing the benefits of both an open and locked differential, depending on the ground conditions. Benefits include improved traction and easier operation and ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Hilco offers an alternative to string wound elements. Improve the ISO cleanliness level in your system by taking advantage of the Hilco 330 Series elements. Hilco offers both the standard 330 & 330 extended tube models as direct replacements. Available in both disposable and washable designs, metal or nylon end cap configuration. ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
The Inciner8 Autoloader is a British steel product made of the highest-grade steels and manufactured by our Queens Award Team, recognised for their innovation and manufacturing ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Standard disc diameters range from 6 inches to 54 inches, with other sizes supplied to order. Discs are bored and drilled to fit Hilliard standard Hubs, meeting customer ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard M300 brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M300 brake caliper is capable of producing a maximum 10,600 LBF (47 kN) of braking force at 1600 PSI (110 Bar) and has been designed for ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Centaur®gas turbines are at work today in thousands of installations both offshore and on land ranging from arctic to tropical ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The H3 Power Unit is Hilliard's most advanced brake control system. With a PID Loop Control, the BBH3 Power Unit is capable of monitoring speed. The Hilliard BBH2 Power Unit incorporates an engineered hydraulic circuit to control the brake torque during a typical stop. Large capacity hydraulic accumulators provide additional volume for precise control of brake pressure. Equipped with manual ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Inferno Fury is an economical racing clutch designed for durability. The sprockets are heat treated steel and the hub is heat treated. The Fury is available with an oil impregnated bronze bushing, or a needle bearing. The Fury is a long lasting low maintenance design with some tunability. The Fury clutch can handle excessive heat and give you consistent torque all race season. The Fury clutch ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard M400HS brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M400HS brake caliper is capable of producing a maximum 12,960 lbf (57.6 kN) of braking force at 1800 psi (124 bar) and has been ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is off ered in 4 sizes to accommodate a ½", 1", 1-3/16", and 1-1/2" ...
-
Manufactured by Enduro Compositesbased in USA
Enduro’s fiberglass channel framing works with industry standard materials as well as most commonly used industrial structures such as beams and columns. Our channel framing can be ordered solid or punched. For punched channel framing, add “H” to the end of the part number; example: EC-10H. Punched not available for double ...
-
Manufactured by Enduro Compositesbased in USA
Designed to work seamlessly with Enduro’s cable tray systems, our fiberglass (FRP) strut systems attach to industry standard materials as well as most commonly used industrial structures such as beams and columns. To learn more about Enduro fiberglass strut systems, please download our FRP Strut & Framing Accessories ...
-
based in SAUDI ARABIA
HDPE cable protection tiles for protecting underground cables and pipes. Heavy duty, yet lightweight polyethylene tiles with warning embedded during the manufacturing process on the top ...
-
Manufactured by Suco Robert Scheuffele GmbH & Co. KGbased in GERMANY
High efficiency with a self-increasing effect. Performance factor of 2.5. Compact ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you