Power Distribution Equipment In United Arab Emirates
-
ShowcaseManufactured by Solar Turbines Incorporatedbased in USA
Solar Mobile Turbomachinery (SMT) is the best solution for oil field power, remote power and trailer power in the industry, and in emergencies such as natural disasters where quick power is essential. The single trailer design is a complete mobile power plant with wide fuel composition flexibility. This solution is based on the 5.7 MWe Taurus 60 gas turbine generator set – a proven industry ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
DataPro, SonicPro and EnerPro surge arrestors – highly stressable and particularly adjusted to sensors and transmitters. Maximum operational safety at small ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
BSG 12, 32, 42 and BSG 20 Ex - for DataPro, SonicPro, EnerPro and IsoPro surge ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Special Solutions for Preadmission Applications. The direct-drive GM ... dz blowers from AERZEN are high-performance machines. 1 or 2 stage design, with separate pressurised oil lubrication for the oil-free transport and compression of air, neutral gases, and gas mixtures. Highly advanced and extremely robust Roots-type products. Available in a wide range of special materials and seals, such as ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard BBH1 Power Unit is a base model that includes on/off and ramped braking modes. With integral manifold mounting and heavy duty pump with fail-safe design, many options are available to customize the system to the specific needs of the ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard MK1400 is an electromagnetic, fail safe caliper brake. Spring applied, electric released, it is suitable for holding duty and emergency for applications such as theatrical stage lifts, elevators and cranes. Alternative mounting arrangement: pin mounting, base mounting horizontal and base mounting angle. The MK1400 is capable of producing a maximum 1,400 LBF of braking force with up ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The A400 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The 400 requires a minimum disc diameter of 24" and is off ered in 2 sizes to accommodate a 1" and 1-1/2" thick disc. The design of ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard Auto-Lok Differential offers equal power transferred to both wheels on an axle regardless of traction, allowing positive back drive through both wheels. The self- contained unit locks and unlocks automatically providing the benefits of both an open and locked differential, depending on the ground conditions. Benefits include improved traction and easier operation and ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Hilco offers an alternative to string wound elements. Improve the ISO cleanliness level in your system by taking advantage of the Hilco 330 Series elements. Hilco offers both the standard 330 & 330 extended tube models as direct replacements. Available in both disposable and washable designs, metal or nylon end cap configuration. ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Standard disc diameters range from 6 inches to 54 inches, with other sizes supplied to order. Discs are bored and drilled to fit Hilliard standard Hubs, meeting customer ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard M300 brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M300 brake caliper is capable of producing a maximum 10,600 LBF (47 kN) of braking force at 1600 PSI (110 Bar) and has been designed for ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Centaur®gas turbines are at work today in thousands of installations both offshore and on land ranging from arctic to tropical ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The H3 Power Unit is Hilliard's most advanced brake control system. With a PID Loop Control, the BBH3 Power Unit is capable of monitoring speed. The Hilliard BBH2 Power Unit incorporates an engineered hydraulic circuit to control the brake torque during a typical stop. Large capacity hydraulic accumulators provide additional volume for precise control of brake pressure. Equipped with manual ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Inferno Fury is an economical racing clutch designed for durability. The sprockets are heat treated steel and the hub is heat treated. The Fury is available with an oil impregnated bronze bushing, or a needle bearing. The Fury is a long lasting low maintenance design with some tunability. The Fury clutch can handle excessive heat and give you consistent torque all race season. The Fury clutch ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard M400HS brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M400HS brake caliper is capable of producing a maximum 12,960 lbf (57.6 kN) of braking force at 1800 psi (124 bar) and has been ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is off ered in 4 sizes to accommodate a ½", 1", 1-3/16", and 1-1/2" ...
-
Manufactured by Eltek ASbased in NORWAY
The Flatpack S DC/DC converter incorporates Telecom specifications, high efficiency, ORing protection on output and high power in a small, 217 mm deep box. Its high efficiency helps on the overall efficiency of a remote DC power feed and hence also the business case for selecting such a solution for powering remote sites. Its small dimensions make it perfect for integration into custom server ...
-
Manufactured by Elecnorbased in SPAIN
Elecnor boasts vast experience and a strong track record in gas infrastructure development in Spain and a number of Latin American markets. In Mexico, for example, Elecnor will be responsible for constructing, operating and maintaining the Morelos gas pipeline, which is approximately 160 km in ...
-
Manufactured by Landis Gyr AGbased in SWITZERLAND
The next generation of commercial metering begins with the E650 S4x. The S4x sets a new standard for versatility right out of the box, with four quadrant measurements of active and reactive energy, load profile and TOU without a battery (when used on an AMI ...
-
Manufactured by Cavotec SAbased in SWITZERLAND
AMPVault are the shore power pits integrated along the berth to connect container and bulk vessels. No interaction with port operations. No interference with ropes, bollard and moving cranes. Safe and easy operations: One-man, fast and safe opening with EZ-lift cover assembly. Limited civil work: Minimum CAPEX due to fibreglass pre-formed ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you