Transformer Oil Monitoring Articles

  • Methods of oil/fuel analysis

    PC GlobeCore can propose you to make a reclaiming test of yours example of fuel (oil) to verify the possibility of clean it. If the oil is contaminated and not suitable for use, filtration can be recommended. Or, you can also make this test by yourself using our laboratory/test-bench transformer oil vacuum regeneration system UVR. The regenerated samples exceeded yours expectations. Average ...


    By GlobeCore GmbH

  • On-site regeneration of transformer oil

    Regeneration of transformer oil at the transformer’s location is an important preventive measure of transformer servicing.   Transformer life time is, in essence, the life time of its insulation system. The most widely used insulation is liquid insulation (transformer oils) and solid insulation (paper, i.e. cellulose insulation). The oil provides for at ...


    By GlobeCore GmbH

  • Modelling oil degradation in electric transformer oil under typical loads

    In testing transformer oils for durability, it is desirable to use typical transformer operating conditions with appropriate allowances for factor of safety against temperature and voltage. The kinetics of degradation of used type II transformer oil with original flash point of 148?C, pour point of 51?C, and water content of 4 ppm was investigated. Assuming that the oil temperature in models Pr01 ...


    By Inderscience Publishers

  • GE Leakwise Application Notes: Oil Detection for Power Distribution Stations

    Transformer Substations Utilities have hundreds of transformer substations. In each substation there are usually several transformers.  Each transformer contains a high volume of insulation oil. A catch basin is built under ...


    By GE Analytical Instruments

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you