voltage loss Articles
-
Why energy meter device can improve the utilization rate of production equipment
Energy meter device is widely used in equipment, which can help enterprises better manage energy, monitor power status, save energy and reduce emissions, maintain equipment, control production costs, comply with environmental protection regulations and improve production efficiency. The energy meter device has become one of the indispensable and important equipment in modern industrial and ...
-
What is HV and LV Power Distribution System?
An HV power distribution system simply means a high voltage distribution system while an LV is a low voltage or tension power distribution system. LV power supply can be around 230 Volts for a single-phase connection and 400 Volts for a three-phase connection. On the other hand, the HV distribution system can even reach 11Kilo-Volts, meaning it is highly used by bulk power purchasers like ...
-
What is the event record of energy meter?
2022-12-29 00:00In the production process of electric energy meters, Yongtailong is controlled in accordance with the ISO9000 international standard quality management system. In the ISO9000 standard, the product production process needs to be traced; For Yongtailong energy meter at the use site, as long as the product number is feedback, it can be traced back to the brand, batch number, ...
-
How to choose the cross-sectional area of the power cable
The choice of the cross-sectional area of the power cable is related to the investment, the loss and voltage quality of the line, and the service life of the cable. If the cross-sectional area of the power cable is too small, the voltage quality will drop, the line loss will be too large, and the initial investment will be too high. Therefore, the appropriate cross-sectional area should be ...
-
Combined Heat And Power Food Processing - California Dairies, Inc. - Case Study
OWNER California Dairies, Inc. LOCATION Tipton, California, USA PRODUCT Centaur® 50 (4.6 MWe) Gas Turbine CUSTOMER VALUE Sustainable Energy Production California Dairies, Inc. is the number one dairy cooperative in the United States. The Tipton facility has a processing capacity of seven million pounds of milk per day, 130 million pounds of powdered milk each year using two ...
-
Optimal reactive power dispatch based on the improved seeker optimisation algorithm and statistical analysis
Optimal reactive power dispatch (ORPD) is one of the important non–linear mixed–variable optimisation problems in power system which includes both continuous and discrete control variables satisfying both equality and inequality constraints. This paper presents a new evolutionary optimisation algorithm to solve the optimal reactive power dispatch problem with operational constraints using the ...
-
Integration of solar photovoltaic (PV) to LV distribution network: a case study
The development of renewable energy sources will increase the amount of generation connected to distribution networks. The main advantages are that optimally located distributed generation resources can reduce or postpone the need for investment in the transmission and distribution infrastructure; transmission and distribution losses are reduced as well as improvement in power quality and system ...
-
Optimal allocation and sizing of DG and shunt capacitors using differential evolutionary algorithm
In the last few years, a number of factors have led to an increased interest in distributed generation (DG) scheme because placement of DG is the most effective method in reducing the power loss of the distribution networks to serve remote loads. Placement of shunt capacitors improves voltage profile but unable to serve remote load as it can provide only reactive power. So, combination of both ...
-
Effect of distributed generation modelling on performance of distribution systems
Due to the continuous increase of distributed generation (DG) penetration into distribution systems, load flow analysis always needs improvement to be more flexible, fast and computationally efficient especially when integrating DG with existing distribution systems. The work in this paper is divided into two parts; in the first part a new algorithm is developed to solve the power flow problem ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you