AMETEK Land - Model 9100 - Carbon Monoxide (CO) Monitor
From Combustion Efficiency Monitors
AMETEK Land, Land Instruments International Ltd, formally announces that from the 30th September 2019 the Model 9100 Cross-stack Carbon Monoxide (CO) Monitor will be discontinued from new product sales.
Overview
Whilst the product has been stopped for new product sales the system is fully supported by our qualified field and factory service teams and our internal technical support engineers. As a 9100 user you will have experienced the instrument is extremely accurate and stable provided it is fully maintained. A full range of spare parts are available from AMETEK Land and will continue to be supplied as standard items until 31st December 2024. After that time, remaining spare parts will available while stocks last.
There is no direct replacement for the Model 9100 however the FGA Series may be suitable in some applications.
Please contact our sales engineers for more details or queries regarding this notification. AMETEK Land believes in supporting and partnering our customers through the lifetime of our products.
Features & Benefits
- Direct continuous measurement of Carbon Monoxide
- True representative measurement - reading averaged across entire duct
- Improved combustion control and efficiency savings
- Low running and maintenance cost
- High reliability - robust design
- Simple installation - advanced alignment features
- Over 20 years of experience in carbon monoxide monitoring - 4th generation product
Specification
Measuring
- Technique: Infrared Gas Cell Correlation Technique
- System Performance
- Measuring Range: 0 - 10000 ppm. m, Other ranges selectable from the keypad
- Pathlength: 0.5 to 10 m / 1.6 to 32 ft
- Measurement Cycle: 20 Hz integrated over 2 secs. Model 9100
- Linearity: ± 3 % of range
- Resolution: 1 ppm
- Response Time: Adjustable between 2 and 250 secs.
- Calibration: Calibration audit, Zero calibration (clear stack)
Control Panel
- Display: 2 x 16 character reflective backlit LCD with
- Adjustable: contrast control (receiver unit)
- signal strength indicator (transmitter unit)
- Keypad: 9 keys for data input, diagnostics, setup and calibration
Environmental
- Temperature Range: -30 to +55 °C / -22 to 131 °F
- Flue Gas Temperature Range: up to 370 °C / 700 °F
- Environmental Rating: IP65
Compliance
- Safety: Conforms to EN61010
- EMC: Conforms to EN50 081 and EN 50 082
Inputs/Outputs
- Flue Gas Temperature Input: Thermocouple, Type K Chromel/Alumel input into the Transmitter unit or 4-20 mA temp. input
- Serial Interface : Isolated RS232 or RS485 communications (Modbus) for: CO concentration, Status, Signal strength, Initiate check cycle, Diagnostic data
- Current Loop (Analog) Outputs (2): : 0, 2, 4 -10, 20mA user configurable for track or hold
- Relay Outputs (3): Independently configurable as System OK, Maintenance, or Alarm (High or low)
- Relay Rating: 30 V d.c., 1 A
Electrical
- Power Supply : 85 - 132, 170 - 264 V a.c. (auto selects), 50 - 60 Hz
- Power Consumption: 200 W
Mechanical Data
- Mounting Flange*: ASA 3”, 150 lb flange (supplied)
- Dimensions (H x W x D): 264 x 212 x 475 mm / 10.4 x 8.4 x 18.7 in
- (Transmitter and Receiver): Note: ‘D’ includes purge
- Weight:
- 9.4 kg / 20.7 lb (Receiver unit)
- 10.1 kg / 22.2 lb (Transmitter unit)
* Transfer Flange Available for Model 9100
Options
- Air Mover Assembly for Air Purge
- Air Purge Blower Unit
- Transfer/Adapter Flanges
- Flue Gas Thermocouple with Current Loop Transmitter
Application/Industries Served
Applications
- Boiler Combustion Efficiency
- Low NOx Burner Performance
- Burner Performance Monitoring
- Process Control
- Precipitator Protection
- Explosion Preventation
Industries
- Power Utilities
- Refineries
- Chemical Plants
- District Heating Plants
- Waste Incinerators
- Cement Plants
- Process Industries
- Pulp & Paper Manufacture
Customer reviews
No reviews were found for AMETEK Land - Model 9100 - Carbon Monoxide (CO) Monitor. Be the first to review!