Arena - Model Diablo (L) - Pyrolysis Oven for Screw Cleaning
Diablo (L) are designed especially for screw cleaning, without disassembling the screw. Screws for extrusion, screws from injection molding are cleaned in a low oxygen environment without any risk of deformation . Cycle time is 1,5 to 4 hours. The screw cleaning equipment is available from 2 up to 7 meter. The door is operated pneumatically, which is very safe for the operator and guarantees gas tightness during the cyle. A postcombustion is integrated in the compact design to meet with all environmental standards.
- thermal cleaning of injection molding machinery,
- cleaning of spinnerets, screens, nozzles
- cleaning of extrusion die, breaker plates, screws
- cleaning blow molding machine parts
- cleaning of hot-runners, electrical motors,
- paintstripping of hooks and racks, jigs
-The termperature control as well as the atmosphere inside the cleaning reactor are accurately controlled by an integrated programmed logic controller (PLC) for fast and thorough cleaning.
-Prior to insertion of the parts, the reactor of the pyrolysis oven can be pre-heated up to a stand by temperature or one can choose to load the parts-to-clean in cold condition.
-The loading frame (pneumatic door) slides out of the cleaning chamber when operated. The loading frame is now easily accessible from different sides to load the contaminated parts. Now parts can be loaded on to a loading platform.
-Multiple cleaning cylces can be programmed. The door is closed and the cleaning cycle will be activated automatically. When the cycle has come to an end, depending on the programmed parameters, the unit resumes stand by operation and the cleaned parts can be unloaded, or it cools down.
-The cycle itself can be freely programmed by a six stage cycle. Each stage of the cycle can be activated or tuned off, especially skipping the heat up phase and/or melting phase.