GE Energy Industry Equipment Available In Tanzania
-
based in USA
GE’s 2.2-2.4MW, 107m rotor wind turbine is an advanced evolution of the 1.x series, providing a 35% increase in Annual Energy Production (AEP) over its predecessor, the 1.85-87 (at a 2.4 rating). Designed for medium wind speeds, the 2.2-2.4MW turbine provides a 51% increase in swept area with the 107m rotor, and an extra 350-450 kW output at rated wind speed compared to the 1.85-87 turbine, ...
-
based in USA
Designed for IEC Wind Class IIIs, GE’s 2.75-120 wind turbine features a 120-meter rotor in combination with the proven single-blade pitch control. The 2.75-120 offers the latest enhancements in load management controls, low acoustic emissions, efficient electrical power conversion and robust ...
-
based in USA
GE’s 1.85-87 wind turbine is designed for Class IIs winds, and offers an 11% increase in swept area and an extra 230 kW output at rated wind speed compared to the 1.6-82.5 turbine. The increase in blade swept area results in a 10% increase in Annual Energy Production (AEP) at 8.5 ...
-
Manufactured by GE Powerbased in USA
Our steam turbine portfolio has the breadth and depth to meet any project-specific need, integrating seamlessly with our gas turbines, HRSGs, and balance of plant equipment to ensure operational success, satisfaction, and profitability for our customers across various ...
-
based in USA
Introducing the J920 FleXtra Jenbacher with 49% el. efficiency 60Hz. GE proudly announces the J920 FleXtra Jenbacher 9.5 MW system for 60 Hz with best-in-class 49% el. efficiency for large gas engine power plants at APPA, Denver on June 16th. Whether you're seeking full power at high efficiency levels or a unit capable of short start-up times. GE's J920 FleXtra gas engine is an ideal, reliable ...
-
Manufactured by GE Powerbased in USA
GE’s 9HA high efficiency, air-cooled gas turbine is one of the industry leaders among H-class offerings, and now the 9HA gas turbine is at the heart of the world's most efficient combined-cycle power ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a fuel for a generator is an excellent way of reducing carbon dioxide ...
-
Manufactured by GE Powerbased in USA
GE’s 7HA high efficiency air-cooled gas turbine is one of the industry leaders among advanced class gas turbine offerings and is available in three models—the 7HA.01 at 290 MW, the 7HA.02 at 384 MW, and the 7HA.03 at 430 ...
-
Manufactured by GE Powerbased in USA
A single, economical solution for the dispatch needs of nearly every industry ...
-
Manufactured by GE Powerbased in USA
GE’s 6F gas turbines offer the superior performance, reliability, and flexibility typically associated with larger power plants. The 6F models, including the 6F.01 and the 6F.03 gas turbines, pack a lot of power into a small package, offering durability and flexibility for harsh, remote, or floating power environments. Whether it be for 50 or 60 Hz, the 6F gas turbines maintain ...
-
Manufactured by GE Powerbased in USA
With over 450 units deployed to more than 40 countries, GE has the largest operating and most experienced OEM F-class fleet in the world. Our 9F gas turbine delivers consistent performance and accommodates a diverse range of fuels, making it great for a variety of combined cycle and CHP ...
-
based in USA
As part of the FlexEfficiency* 60 Portfolio of products, GE’s 7F-5 gas turbine incorporates advanced combustion technology to deliver operating flexibility, including better turndown capability, while sustaining higher levels of efficiency. This translates into increased revenue across a wide range of operating ...
-
based in USA
GE’s 1.7-100/103 wind turbine offers a 47% increase in swept area when compared to GE’s 1.6-82.5 turbine, resulting in a 24% increase in Annual Energy Production (AEP) at 7.5 m/s. This increase in blade swept area allows greater energy capture and improved project economics for wind developers. The 1.7-100/103 uses GE’s proprietary 48.7-meter blade which has the same proven ...
-
based in USA
The result of continuous enhancements and extensive experience, GE's Jenbacher Type 6 gas engines are an advanced and reliable addition to our product line. Serving the 1.5 to 4.4 MW power range, the 1,500-rpm engine speed results in a high power density and low installation costs. In addition, the Type 6 pre-combustion chamber achieves maximum efficiency with low emissions. Proven design and ...
-
Manufactured by GE Powerbased in USA
Our air-cooled generator systems install fast, integrate easily, and deliver the power needed with more uptime. These generators are the choice for power plant applications that demand simple, flexible operation. Prepackaged generator solutions arrive ready-to-install at site reducing project cycle time with increased ...
-
based in USA
Hybrid electric solutions are available in gear-mounted or direct-drive, shaft-mounted electric motor configurations, principally combined in a hybrid with gas turbines or diesel engines with the mode depending on speed, for example. Compact, transformerless drives are ideal for vessel space constraints. ...
-
Manufactured by GE Powerbased in USA
Its ability to operate in island mode, coupled with multiple decades of proven rugged performance, make the 6B.03 an excellent solution for remote installations and extreme operating conditions. The rugged, reliable 6B.03 heavy-duty gas turbine is a popular choice for refineries, natural gas liquefaction power, CHP applications, and industrial ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
A GE Jenbacher gas engine module is configured for the recovery of both electricity and heat via a cogeneration / CHP configuration. As with the genset, the gas engine is linked to the alternator which produces electrical power for export. The cooling water circuits of the engine are first linked to a plate heat exchanger which facilitates the transfer of hot water to an external hot water ...
-
based in USA
The GE 1.85-82.5 is the turbine of choice for IEC class II winds, and provides over 7% more AEP than the 1.6-82.5 at 8.5 m/s. The 1.85-82.5 turbine is available in tower heights of both 80 and 65 meters. These tower sizes both provide flexible options for Class II wind sites,as well as higher energy capture in a variety of challenging ...
-
Manufactured by GE Powerbased in USA
GE integrates technology, experience, and people to deliver the highest-value simple-cycle and combined-cycle power plants anywhere in the world. This value comes from technologies that provide the lowest lifecycle cost of converting fuel into ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you