EURO - Model CK-3 - Charcoal Kiln
From Auxiliary Equipment
CK-3 “EURO” is a continuation of charcoal kilns of the “EURO” line, which have been produced by GREENPOWER Company since 2009. The main purpose of the kiln - production of charcoal and thermal energy by low-temperature pyrolysis. As raw materials it can be used both firewood and wood waste of soft and hard species (logging and woodworking waste). Charcoal of new generation can be produced using briquettes ((pini-kay, ruff, nestro) as raw materials, Charcoal from briquettes is superior to conventional in all aspects.
-
Most popular related searches
The uniqueness of the “EURO” kiln tech...
The uniqueness of the “EURO” kiln technology is following: we do not move raw material from chamber to chamber, we move the process that provides high performance at relatively low cost. With the help of valves the necessary mode is switched in the chamber: “DRYING” or “PYROLYSIS”. This allows to manage the process of gassing during pyrolysis and has a positive effect on the quality of charcoal.
The main advantage of CK-3 “EURO”
- Minimal dimensions – maximal efficiency
- High coefficient of efficiency
- Completely mechanized control, loading/unloading of trolleys
- Maximum even heating of raw material – high grade of charcoal or biochar
- Fuel briquette doesn’t change its shape and structure
- Not more than 3% of siftings
- Construction is 100% safe
- It doesn’t require qualification of the maintenance staff
- Generation of heat or electricity
- No assembly
- Environmentally friendly technology
CK-3 “EURO” is produced in two variants:
- CK-3 “EURO”. It is standard variant of the kiln; overall dimensions correspond to 20’ container. The chambers are produced from stainless steel and include 3 trolleys each; there are 12 trolleys in the kit. Besides there are mechanized controlling, ALARM mode and many others.
- CK-3 “EURO-m”. It is enlarged variant with respective increase in productivity. It includes mechanized controlling. The chambers are produced from stainless steel as well and include 4 trolleys each; there are 16 trolleys in the kit.
Description of the kiln
The kiln consists of 2 chambers equipped with flue pipes from heat-resistant steel (1100ᵒC) connected to chimney with deflector and furnace, includes 12 or 16 trolleys depending on kiln variant, platform to move the trolleys, trestle for loading and unloading of raw material and charcoal and an electric winch as well. The chambers can operate in DRYING and PYROLYSIS modes. Each chamber contains 3 or 4 trolleys (depending on the model) and has a loading hatch to load/unload the trolleys. The chambers are equipped with gas-escape channels used to withdraw gas emitted during the process of pyrolysis into the furnace. It provides support of drying/pyrolysis and ecological cleanness of the process. The kiln construction supports the modes of drying and pyrolysis. The upper parts of the chambers equipped with discharging pipes of steam emitted during the process of wood drying. There is a waterlock attached to the chamber to stabilize pressure inside the chamber and to drain a condensate from the steam discharging pipe. The kiln is equipped with a chimney. All the operating controls are mechanized. A permanent notation of the main operating parameters is conducted, that allows to carry out an analysis of the kiln operation.
Customer reviews
No reviews were found for EURO - Model CK-3 - Charcoal Kiln. Be the first to review!